|
|
PDF HCPL-6730 Data sheet ( Hoja de datos )
| Número de pieza | HCPL-6730 | |
| Descripción | (HCPL-xxxx) Hermetically Sealed / Low IF / Wide VCC / High Gain Optocouplers | |
| Fabricantes | Hewlett-Packard | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HCPL-6730 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
Hermetically Sealed, Low IF,
Wide VCC, High Gain
Optocouplers
Technical Data
6N140A*
HCPL-675X
83024
HCPL-570X
HCPL-177K
5962-89810
HCPL-573X
HCPL-673X
5962-89785
5962-98002
*See matrix for available extensions.
Features
• Dual Marked with Device
Part Number and DSCC
Drawing Number
• Manufactured and Tested on
a MIL-PRF-38534 Certified
Line
• QML-38534, Class H and K
• Five Hermetically Sealed
Package Configurations
• Performance Guaranteed,
Over -55°C to +125°C
• Low Input Current
Requirement: 0.5 mA
• High Current Transfer
Ratio: 1500% Typical @
IF = 0.5 mA
• Low Output Saturation
Voltage: 0.11 V Typical
• 1500 Vdc Withstand Test
Voltage
• High Radiation Immunity
• 6N138/9, HCPL-2730/31
Function Compatibility
• Reliability Data
Applications
• Military and Space
• High Reliability Systems
• Telephone Ring Detection
• Microprocessor System
Interface
• Transportation, Medical, and
Life Critical Systems
• Isolated Input Line Receiver
• EIA RS-232-C Line Receiver
• Voltage Level Shifting
• Isolated Input Line Receiver
• Isolated Output Line Driver
• Logic Ground Isolation
• Harsh Industrial Environments
• Current Loop Receiver
• System Test Equipment
Isolation
• Process Control
Input/Output Isolation
Description
These units are single, dual, and
quad channel, hermetically sealed
optocouplers. The products are
capable of operation and storage
over the full military temperature
range and can be purchased as
either standard product or with
full MIL-PRF-38534 Class Level
H or K testing or from the appro-
priate DSCC Drawing. All devices
are manufactured and tested on a
MIL-PRF-38534 certified line and
are included in the DSCC Quali-
fied Manufacturers List QML-
38534 for Hybrid Microcircuits.
Each channel contains a GaAsP
light emitting diode which is
optically coupled to an integrated
high gain photon detector. The
high gain output stage features
an open collector output providing
both lower saturation voltage and
higher signaling speed than
possible with conventional photo-
Darlington optocouplers. The
shallow depth and small junctions
offered by the IC process
provides better radiation
immunity than conventional
photo transistor optocouplers.
The supply voltage can be
operated as low as 2.0 V without
adversely affecting the
parametric performance.
Truth Table
(Positive Logic)
Input
On (H)
Off (L)
Output
L
H
Functional Diagram
Multiple Channel Devices
Available
1
VCC
8
27
3
VOUT
6
45
GND
The connection of a 0.1 µF bypass capacitor between VCC and GND is recommended.
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to
prevent damage and/or degradation which may be induced by ESD.
1 page  
5
Hermetic Optocoupler Options
Option
Description
100 Surface mountable hermetic optocoupler with leads trimmed for butt joint assembly. This option is
available on commercial and hi-rel product in 8 and 16 pin DIP (see drawings below for details).
0.51 (0.020)
MIN.
2.29 (0.090)
2.79 (0.110)
4.32 (0.170)
MAX.
1.14 (0.045)
1.40 (0.055)
0.51 (0.020)
MAX.
4.32 (0.170)
MAX.
0.51 (0.020)
MIN.
2.29 (0.090)
2.79 (0.110)
1.14 (0.045)
1.40 (0.055)
0.51 (0.020)
MAX.
NOTE: DIMENSIONS IN MILLIMETERS (INCHES).
0.20 (0.008)
0.33 (0.013)
7.36 (0.290)
7.87 (0.310)
200 Lead finish is solder dipped rather than gold plated. This option is available on commercial and hi-rel
product in 8 and 16 pin DIP. DSCC Drawing part numbers contain provisions for lead finish. All leadless
chip carrier devices are delivered with solder dipped terminals as a standard feature.
300 Surface mountable hermetic optocoupler with leads cut and bent for gull wing assembly. This option is
available on commercial and hi-rel product in 8 and 16 pin DIP (see drawings below for details). This
option has solder dipped leads.
0.51 (0.020)
MIN.
2.29 (0.090)
2.79 (0.110)
4.57 (0.180)
MAX.
1.40 (0.055)
1.65 (0.065)
0.51 (0.020)
MAX.
600
4.57 (0.180)
MAX.
0.51 (0.020)
MIN.
2.29 (0.090)
2.79 (0.110)
1.40 (0.055)
1.65 (0.065)
0.51 (0.020)
MAX.
5° MAX.
NOTE: DIMENSIONS IN MILLIMETERS (INCHES).
0.20 (0.008)
0.33 (0.013)
9.65 (0.380)
9.91 (0.390)
4.57 (0.180)
MAX.
Surface mountable hermetic optocoupler with leads trimmed for butt joint assembly. This option is
available on commercial and hi-rel product in 8 and 16 pin DIP (see drawings below for details). Contact
factory for the availability of this option on DSCC part types.
0.51 (0.020)
MIN.
3.81 (0.150)
MIN.
2.29 (0.090)
2.79 (0.110)
1.14 (0.045)
1.25 (0.049)
NOTE: DIMENSIONS IN MILLIMETERS (INCHES).
0.20 (0.008)
0.33 (0.013)
7.36 (0.290)
7.87 (0.310)
0.51 (0.020)
MIN.
2.29 (0.090)
2.79 (0.110)
3.81 (0.150)
MAX.
1.02 (0.040)
TYP.
5 Page 
11
PULSE GEN.
ZO = 50 Ω
tr, tf = 50 ns
f = 100 Hz
tPULSE = 0.5ms
IF
IF MONITOR
Rm
D.U.T.
VCC
RCC*
56 Ω
1.0 µF
+5 V
RL
VO
GND
CL**
* SEE NOTE 11
** CLINCLUDES PROBE AND STRAY WIRING CAPACITANCE.
IF B D.U.T. RCC* 56 Ω
+5 V
VCC
1.0 µF RL
A
VO
VFF
* SEE NOTE 11
GND
+ V–CM
PULSE GEN.
Figure 8. Switching Test Circuit (f, tP
not JEDEC registered).
VCC
R1
ILEAK R2
R2 >
2.4 - VF
IF
R1
<
VCC - VF - IF R2
IF + ILEAK
D.U.T.
VCC
VO
GND
Figure 9. Test Circuit for Transient Immunity and
Typical Waveforms.
R2 MAY BE OMITTED
IF ADDITIONAL FANOUT
IS NOT USED.
Figure 10. Recommended Drive Circuitry Using TTL Open-Collector Logic.
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet HCPL-6730.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HCPL-6730 | (HCPL-xxxx) Hermetically Sealed / Low IF / Wide VCC / High Gain Optocouplers | Hewlett-Packard |
| HCPL-6731 | (HCPL-xxxx) Hermetically Sealed / Low IF / Wide VCC / High Gain Optocouplers | Hewlett-Packard |
| HCPL-673K | (HCPL-xxxx) Hermetically Sealed / Low IF / Wide VCC / High Gain Optocouplers | Hewlett-Packard |
| HCPL-673x | (HCPL-xxxx) Hermetically Sealed / Low IF / Wide VCC / High Gain Optocouplers | Hewlett-Packard |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |