DataSheet.jp

2ED300C17 の電気的特性と機能

2ED300C17のメーカーはEupecです、この部品の機能は「Dual IGBT Driver」です。


製品の詳細 ( Datasheet PDF )

部品番号 2ED300C17
部品説明 Dual IGBT Driver
メーカ Eupec
ロゴ Eupec ロゴ 




このページの下部にプレビューと2ED300C17ダウンロード(pdfファイル)リンクがあります。

Total 30 pages

No Preview Available !

2ED300C17 Datasheet, 2ED300C17 PDF,ピン配置, 機能
EiceDRIVER
2ED300C17-S
2ED300C17-ST
Dual IGBT Driver for
Medium and High Power IGBTs
Datasheet and Application Note
sheet4u.comPrepared by : M.Hornkamp
taApproved by: Reg.Nr.064-02
www.daSN: 23925 SN:24816
Date of publication: 16.05.2003
Revision: 3.0
Status: preliminary
eupec GmbH
Max-Planck-Straße 5
D-59581 Warstein
Author:Michael Hornkamp
Tel. +49(0)2902 764-0
Fax +49(0)2902 764-1150
www.eupec.com

1 Page





2ED300C17 pdf, ピン配列
Technical Information
EiceDRIVER2ED300C17-S
General Information 2ED300C17-S:
preliminary
This datasheet describes the dual channel IGBT driver 2ED300C17-S for industrial application and the
2ED300C17-ST for traction application. The Drivers are separated in two temperature classes –25°C
for the 2ED300C17-S and –40°C for the 2ED300C17ST. The electrical function and the mechanic
dimension are in both version similar. Only if there is a different in the types the 2ED300C17-ST is
called.
The 2ED300C17-S is one of the EiceDRIVERTM driver family. (eupec IGBT controlled efficiency
DRIVER). The 2ED300C17-S IGBT driver is designed for use with eupec IGBT modules of the 1200V
and 1700V series. Functions of the 2ED300C17-S such as the “soft shut down” or the VCEsat reference
curves have to be adapted to the individual modules. This is described in the following chapters.
The 2ED300C17-S is designed for applications with high safety and reliability requirements and aims
for power ratings of 75kW to 1MW.
To offer high interference suppression, +15V is generally used for control. The entire logic processing
is also done with +15V. The integrated transformer is separated into three sections:
Two pulse transformers and a dual channel DC-DC switch mode power supply. These are designed
such that they offer lowest coupling capacitances and high isolation stability.
The 2ED300C17-S is additionally equipped with a feed-back ”Sense” input. This input can optionally
be connected with the active clamping or di/dt and dv/dt control.
The clearance and creepage distances comply with VDE0110 and VDE0160 / EN50178 and are
designed for pollution degree 3. Materials of the transformer meet requirements of UL94V0. Protection
degree IP00.
To protect from undefined switching of IGBTs in case of a gate-emitter short circuit of another IGBT,
the supply voltage VA;B+; VA;B- is internally monitored in the driver for short circuit currents. In case of a
gate-emitter short the secondary circuit is interrupted and thus the primary voltage maintained.
Exclusion clause:
The datasheet is part of the eupec IGBT driver 2ED300C17-S. To guaranty safe and fault free
operation it is necessary to have read and understood this datasheet.
The eupec IGBT driver 2ED300C17-S is only intended for control of eupec IGBT modules. The
company eupec GmbH cannot warrant against damage and/or dysfunction if IGBT modules used not
produced by eupec.
In this context, eupec GmbH retains the right to change technical data and product specifications
without prior notice to the course of improvement.
www.eupec.com
www.EiceDRIVER.com
Page 3


3Pages


2ED300C17 電子部品, 半導体
Technical Information
EiceDRIVER2ED300C17-S
preliminary
1.4 Block diagram 2ED300C17-S
IN A
CA
IN B
CB
MODE
Dead
time
Dead
time
Pulse
Stage
Logic
Fault
Detection
RESET
FAULT
VDD
VDC
GND
Fault-
Memory
Supply
Voltage
Pulse
Stage
DC/DC
Converter
Control
Fault
Detection
Pulse
Former
Under-
voltage
Soft-
shut down
Pulse
Memory
Fault
Detection
Pulse
Former
Under-
voltage
Soft-
shut down
Pulse
Memory
EDFA
VCEsat
Sense A
DOCD
EDFA
VCEsat
Sense B
DOCD
E. A
VCE sat A
Gate A
COM A
VA+
VA-
Sense A
RC A
E. B
VCE sat B
Gate B
COM B
VB+
VB-
Sense B
RC B
1.5 Inputs and outputs 2ED300C17-S
IN A; IN B
PWM signal inputs for channel A and channel B
CA; CB
Mode
Reset
Fault
Inputs for external interlock delay time generation for channel A and B in half bridge mode
Input for operating mode selection. Direct mode GND; half bridge mode +15V
With reset and operating PWM signals the primary fault memory is reset. Reset has active high logic. A
high signal activates the reset.
The fault output indicates a fault. The fault output is open collector.
VDC
VDD
GND
E.A; E.B
Supply for the DC-DC SMPS
Electronic supply
GND is ground and reference point for all primary signals and the supply voltage
External fault input. Is used to set the fault memory by an external signal.
VCE sat A; B
Gate A; B
Input for the saturation voltage monitoring
Driver output to the IGBT module gate via an external gate resistor
COM A; B
VA+; VA- ; VB+; VB-
Sense
RC A; RC B
COM A; B is connected to the auxiliary emitters of the IGBT module
Non-isolated supply voltage for additional use and connection of the buffer capacitors
Control input for the optional di/dt or dv/dt control, setting of the soft shut down or active clamping
RC network for VCE sat reference curve
www.eupec.com
www.EiceDRIVER.com
Page 6

6 Page



ページ 合計 : 30 ページ
 
PDF
ダウンロード
[ 2ED300C17 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
2ED300C17

Dual IGBT Driver

Eupec
Eupec


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap