(PDF) IW4502B Datasheet - Hex Inverter/Buffer

Número de pieza	IW4502B
Descripción	Hex Inverter/Buffer
Fabricantes	IK Semiconductor
Logotipo
Hay una vista previa y un enlace de descarga de IW4502B (archivo pdf) en la parte inferior de esta página. Total 6 Páginas
No Preview Available ! TECHNICAL DATA Strobed Hex Inverter/Buffer High-Voltage Silicon-Gate CMOS IW4502B The IW4502B consists of six inverter/buffers with 3-state outputs. A logic “1” on the OUTPUT ENABLE input produces a high impedance state in all six outputs. This feature permits common busing of the outputs, thus simplifying system design. A logic “1” on the DIRECTION input switches all six outputs to logic “0” if the OUTPUT ENABLE input is a logic “0”. • Operating Voltage Range: 3.0 to 18 V • Maximum input current of 1 µA at 18 V over full package-temperature range; 100 nA at 18 V and 25°C • Noise margin (over full package temperature range): 1.0 V min @ 5.0 V supply 2.0 V min @ 10.0 V supply 2.5 V min @ 15.0 V supply ORDERING INFORMATION IW4502BN Plastic IW4502BD SOIC TA = -55° to 125° C for all packages LOGIC DIAGRAM PIN ASSIGNMENT www.datasheet4u.cPPoIINNm81=6=GVNCDC FUNCTION TABLE Inputs Output Direction Enable LL LL LH HX Z = high impedance X = don’t care Output AY LH HL XL XZ 1 1 page IW4502B Figure 1. Switching Waveforms Figure 2. Switching Waveforms EXPANDED LOGIC DIAGRAM (1/6 of the Device) 5 5 Page

Páginas	Total 6 Páginas
PDF Descargar	[ Datasheet IW4502B.PDF ]

Número de pieza	Descripción	Fabricantes
SLA6805M	High Voltage 3 phase Motor Driver IC.	Sanken
SDC1742	12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.	Analog Devices

PDF IW4502B Data sheet ( Hoja de datos )