DataSheet.jp


HCPL-0930 データシート PDF ( 特性, スペック, ピン接続図 )

部品番号 HCPL-0930
部品説明 (HCPL-09xx) High Speed Digital Isolators
メーカ Hewlett-Packard
ロゴ Hewlett-Packard ロゴ 
プレビュー
Total 12 pages
		
11

No Preview Available !

HCPL-0930 Datasheet, HCPL-0930 PDF,ピン配置, 機能
Agilent HCPL-9000/-0900, -9030/-0930,
HCPL-9031/-0931, -900J/-090J,
HCPL-901J/-091J, -902J/-092J
High Speed Digital Isolators
Data Sheet
Description
The HCPL-90xx and HCPL-09xx
CMOS digital isolators feature
high speed performance and
excellent transient immunity
specifications. The symmetric
magnetic coupling barrier gives
these devices a typical pulse
width distortion of 2 ns, a typical
propagation delay skew of 4 ns
and 100 Mbaud data rate, making
them the industrys fastest
digital isolators.
The single channel digital isola-
tors (HCPL-9000/-0900) features
an active-low logic output enable.
The dual channel digital isolators
are configured as unidirectional
(HCPL-9030/-0930) and bi-
directional (HCPL-9031/-0931),
operating in full duplex mode
making it ideal for digital
fieldbus applications.
The quad channel digital isola-
tors are configured as unidirec-
tional (HCPL-900J/-090J), two
channels in one direction and
two channels in opposite direc-
tion (HCPL-901J/-091J), and one
channel in one direction and
three channels in opposite
direction (HCPL-902J/-092J).
These high channel density make
them ideally suited to isolating
data conversion devices, parallel
buses and peripheral interfaces.
They are available in 8-pin PDIP,
8-pin Gull Wing, 8-pin SOIC
packages, and 16pin SOIC
narrow-body and wide-body
packages. They are specified over
the temperature range of -40° C
to +100° C.
CAUTION: It is advised that
normal static precautions be
taken in handling and assembly
of this component to prevent
damage and/or degradation,
which may be induced by ESD.
Features
• +3.3V and +5V TTL/CMOS
compatible
• 3 ns max. pulse width distortion
• 6 ns max. propagation delay skew
• 15 ns max. propagation delay
• High speed: 100 MBd
• 15 kV/µs min. common mode
rejection
• Tri-state output
(HCPL-9000/-0900)
• 2500 V RMS isolation
• UL1577 and IEC 61010-1 approved
Applications
• Digital fieldbus isolation
• Multiplexed data transmission
• Computer peripheral interface
• High speed digital systems
• Isolated data interfaces
• Logic level shifting

1 Page



HCPL-0930 pdf, ピン配列
Pin Description
Symbol Description
VDD1
VDD2
INX
OUTX
GND1
GND2
VOE
NC
Power Supply 1
Power Supply 2
Logic Input Signal
Logic Output Signal
Power Supply Ground 1
Power Supply Ground 2
Logic Output Enable
(Single Channel), Active Low
Not Connected
Functional Diagrams
Single Channel
VDD1 1
IN1 2
NC 3
GND1 4
8 VDD2
7 VOE
6 OUT1
5 GND2
HCPL-9000/0900
Truth Table
IN1 VOE
LL
HL
LH
HH
OUT1
L
H
Z
Z
Dual Channel
VDD1 1
IN1 2
IN2 3
GND1 4
8 VDD2
VDD1 1
7 OUT1
IN1 2
6 OUT2
OUT2 3
5 GND2 GND1 4
8 VDD2
7 OUT1
6 IN2
5 GND2
HCPL-9030/0930
HCPL-9031/0931
Quad Channel
VDD1 1
GND1 2
IN1 3
IN2 4
IN3 5
IN4 6
NC 7
GND1 8
16 VDD2
VDD1 1
15 GND2 GND1 2
14 OUT1
IN1 3
13 OUT2
IN2 4
12 OUT3 OUT3 5
11 OUT4 OUT4 6
10 NC
NC 7
9 GND2 GND1 8
16 VDD2
15 GND2
14 OUT1
13 OUT2
12 IN3
11 IN4
10 NC
9 GND2
VDD1 1
GND1 2
IN1 3
IN2 4
IN3 5
OUT4 6
NC 7
GND1 8
16 VDD2
15 GND2
14 OUT1
13 OUT2
12 OUT3
11 IN4
10 NC
9 GND2
HCPL-900J/-090J
HCPL-901J/-091J
HCPL-902J/-092J
3


3Pages


HCPL-0930 電子部品, 半導体
HCPL-090J, HCPL-091J and HCPL-092J Narrow Body SOIC-16 Package
0.386 (9.802)
0.394 (9.999)
81
Pin 1 indent
0.228 (5.791)
0.244 (6.197)
0.152 (3.861)
0.157 (3.988)
0.013 (0.330)
0.020 (0.508)
0.050 (1.270)
0.060 (1.524)
0.040 (1.016)
0.060 (1.524)
DIMENSIONS: INCHES (MILLIMETERS) MIN
MAX
0.054 (1.372)
0.068 (1.727)
0.004 (0.102)
0.010 (0.249)
0.008 (0.191)
0.010 (0.249)
0.010
0.020
(0.245)
(0.508)
x
45°
0° 8° TYP
0.016 (0.406)
0.050 (1.270)
Package Characteristics
Parameter
Symbol Min.
Typ.
Max.
Units
Test Conditions
Capacitance (Input-Output)[1]
Single Channel
Dual Channel
Quad Channel
Thermal Resistance
8-Pin PDIP
8-Pin SOIC
Package Power Dissipation
8-Pin PDIP
8-Pin SOIC
CI-O
θJCT
PPD
pF f = 1 MHz
1.1
2.0
4.0
°C/W
Thermocouple located at
150 center underside of package
240
mW
150
150
Notes:
1. Single and dual channels device are considered two-terminal devices: pins 1-4 shorted and pins 5-8 shorted. Quad channel devices are considered
two-terminal devices: pins 1-8 shorted and pins 9-16 shorted.
This product has been tested for electrostatic sensitivity to the limits stated in the specifications. However, Agilent recommends that all integrated circuits
be handled with appropriate care to avoid damage. Damage caused by inappropriate handling or storage could range from performance degradation to
complete failure.
6

6 Page





ページ 合計 : 12 ページ
PDF
ダウンロード
[ HCPL-0930.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
HCPL-0930

There is a function of (HCPL-09xx) High Speed Digital Isolators.

Hewlett-Packard
Hewlett-Packard
HCPL-0931

There is a function of (HCPL-09xx) High Speed Digital Isolators.

Hewlett-Packard
Hewlett-Packard

多くを見つけるデータシート

部品番号部品説明メーカ
82S129

The 82S126 and 82S129 are field programmable, which means that custom patterns are immediately available by following the Signetics Generic fusing procedure. 1K-bit TTL Bipolar PROM, Address access time : 50ns max.

NXP
NXP
D1695

This part is a darlington connection NPN silicon epitaxial transistor. The 2SD1695 is a Darlington connection transistor and incorporates a dumper diode between the collector and emitter and a constant voltage diode and protection elements between the collector and base. This transistor is ideal for drives in solenoid and actuators.

NEC
NEC

www.DataSheet.jp    |   2018   |  メール    |   最新    |   Sitemap