|
|
HCPL-2503のメーカーはFairchild Semiconductorです、この部品の機能は「(HCPL-xxxx) HIGH SPEED TRANSISTOR OPTOCOUPLERS」です。 |
部品番号 | HCPL-2503 |
| |
部品説明 | (HCPL-xxxx) HIGH SPEED TRANSISTOR OPTOCOUPLERS | ||
メーカ | Fairchild Semiconductor | ||
ロゴ | |||
このページの下部にプレビューとHCPL-2503ダウンロード(pdfファイル)リンクがあります。 Total 12 pages
HIGH SPEED
TRANSISTOR OPTOCOUPLERS
SINGLE-CHANNEL: 6N135
DUAL-CHANNEL: HCPL-2530
PACKAGE
6N136
HCPL-2531
HCPL-2503
SCHEMATIC
HCPL-4502
8
1
8
1
8
1
N/C 1
+2
V
F
_3
N/C 4
8
V
CC
7
V
B
6V
O
5 GND
+1
V
F1
_2
_3
V
F2
+4
8
V
CC
7
V
01
6
V
02
5 GND
6N135, 6N136, HCPL-2503, HCPL-4502
Pin 7 is not connected in
Part Number HCPL-4502
HCPL-2530/HCPL-2531
DESCRIPTION
The HCPL-4502/HCPL-2503, 6N135/6 and HCPL-2530/HCPL-2531 optocouplers consist of an AlGaAs LED optically coupled to a
high speed photodetector transistor.
A separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional
phototransistor optocouplers by reducing the base-collector capacitance of the input transistor.
An internal noise shield provides superior common mode rejection of 10kV/µs. An improved package allows superior insulation
permitting a 480 V working voltage compared to industry standard of 220 V.
FEATURES
• High speed-1 MBit/s
• Superior CMR-10 kV/µs
• Dual-Channel HCPL-2530/HCPL-2531
• Double working voltage-480V RMS
• CTR guaranteed 0-70°C
• U.L. recognized (File # E90700)
APPLICATIONS
• Line receivers
• Pulse transformer replacement
• Output interface to CMOS-LSTTL-TTL
• Wide bandwidth analog coupling
© 2004 Fairchild Semiconductor Corporation
Page 1 of 12
11/2/04
1 Page HIGH SPEED
TRANSISTOR OPTOCOUPLERS
SINGLE-CHANNEL: 6N135
DUAL-CHANNEL: HCPL-2530
6N136
HCPL-2531
HCPL-2503
HCPL-4502
ELECTRICAL CHARACTERISTICS (TA = 0 to 70°C Unless otherwise specified)
INDIVIDUAL COMPONENT CHARACTERISTICS
Parameter
Test Conditions
Symbol Device Min Typ** Max Unit
EMITTER
Input Forward Voltage
Input Reverse Breakdown Voltage
Temperature coefficient of
forward voltage
(IF = 16 mA, TA =25°C)
(IF = 16 mA)
(IR = 10 µA)
VF
BVR
(IF = 16 mA) (∆VF/∆TA)
1.45 1.7
1.8
5.0
V
V
-1.6 mV/°C
DETECTOR
Logic high output current
(IF = 0 mA, VO = VCC = 5.5 V)
(TA =25°C)
All
6N135
(IF = 0 mA, VO = VCC = 15 V)
IOH
6N136
(TA =25°C)
HCPL-4502
HCPL-2503
0.001 0.5
0.005 1
µA
Logic low supply current
(IF = 0 mA, VO = VCC = 15 V)
All
6N135
(IF = 16 mA, VO = Open)
6N136
(VCC = 15 V)
ICCL
HCPL-4502
HCPL-2503
50
120 200
µA
(IF1 = IF2 = 16 mA, VO = Open)
(VCC = 15 V)
(IF = 0 mA, VO = Open, VCC = 15 V)
(TA =25°C)
HCPL-2530
HCPL-2531
6N135
6N136
HCPL-4502
HCPL-2503
200 400
1
Logic high supply current
(IF = 0 mA, VO = Open)
(VCC = 15 V)
ICCH
6N135
6N136
HCPL-4502
HCPL-2503
µA
2
** All Typicals at TA = 25°C
(IF = 0 mA, VO = Open)
(VCC = 15 V)
HCPL-2530
HCPL-2531
0.02 4
© 2004 Fairchild Semiconductor Corporation
Page 3 of 12
11/2/04
3Pages HIGH SPEED
TRANSISTOR OPTOCOUPLERS
SINGLE-CHANNEL: 6N135
DUAL-CHANNEL: HCPL-2530
6N136
HCPL-2531
HCPL-2503
HCPL-4502
ISOLATION CHARACTERISTICS (TA = 0 to 70°C Unless otherwise specified)
Characteristics
Test Conditions
Symbol Min Typ** Max Unit
Input-output
insulation leakage current
Withstand insulation test voltage
Resistance (input to output)
Capacitance (input to output)
DC Current gain
Input-Input
Insulation leakage current
Input-Input Resistance
Input-Input Capacitance
(Relative humidity = 45%)
(TA = 25°C, t = 5 s)
(VI-O = 3000 VDC)
(Note 9)
(RH ≤ 50%, TA = 25°C)
(Note 9) ( t = 1 min.)
(Note 9) (VI-O = 500 VDC)
(Note 9) (f = 1 MHz)
(IO = 3 mA, VO = 5 V)
(RH ≤ 45%, VI-I = 500 VDC) (Note 10)
t = 5 s, (HCPL-2530/2531 only)
(VI-I = 500 VDC) (Note 10)
(HCPL-2530/2531 only)
(f = 1 MHz) (Note 10)
(HCPL-2530/2531 only)
II-O
VISO
RI-O
CI-O
HFE
II-I
RI-I
CI-I
1.0 µA
2500
1012
0.6
150
0.005
1011
0.03
VRMS
Ω
pF
µA
Ω
pF
Notes
1. Derate linearly above 70°C free-air temperature at a rate of 0.8 mA/°C.
2. Derate linearly above 70°C free-air temperature at a rate of 1.6 mA/°C.
3. Derate linearly above 70°C free-air temperature at a rate of 0.9 mW/°C.
4. Derate linearly above 70°C free-air temperature at a rate of 2.0 mW/°C.
5. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF, times 100%.
6. The 4.1 kΩ load represents 1 LSTTL unit load of 0.36 mA and 6.1kΩ pull-up resistor.
7. The 1.9 kΩ load represents 1 TTL unit load of 1.6 mA and 5.6 kΩ pull-up resistor.
8. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge of the
common mode pulse signal VCM, to assure that the output will remain in a logic high state (i.e., VO>2.0 V). Common mode
transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge of the common mode
pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO<0.8 V).
9. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted
together.
10. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together.
I
© 2004 Fairchild Semiconductor Corporation
Page 6 of 12
11/2/04
6 Page | |||
ページ | 合計 : 12 ページ | ||
|
PDF ダウンロード | [ HCPL-2503 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
HCPL-2502 | (HCPL2502 / HCPL2503) High Speed Transistor Optocouplers | General Instrument Optoelectronics |
HCPL-2502 | (HCPL-xxxx) Single Channel / High Speed Optocouplers | Hewlett-Packard |
HCPL-2502 | High Speed Optocouplers | AVAGO |
HCPL-2503 | HIGH SPEED TRANSISTOR OPTOCOUPLERS | Fairchild Semiconductor |