DataSheet.jp

PDF RE200B Data sheet ( 特性 )

部品番号 RE200B
部品説明 Pyroelectric Passive Infrared Sensor
メーカ ETC
ロゴ ETC ロゴ 

このページの下部にプレビューとRE200Bダウンロード(pdfファイル)リンクがあります。

Total 4 pages

No Preview Available !

RE200B Datasheet, RE200B PDF,ピン配置, 機能
RE200B
TYPE OF SENSOR
BALANCED DIFFERENTIAL (SERIES OPPOSED TYPE.)
PHYSICAL CONFIGURATION
1) PACKAGE : TO - 5 METAL CAN WITH DIMENSIONS SHOWN IN FIGURE 1-C (NICKEL-PLATED)
2) ELEMENT GEOMETRY : TWO SENSITIVE AREAS 2. 0 М LONG, 1. 0 М AND SPACED 1. 0 М APART.
3) ELEMENT ORIENTATION : SEE FIGURE 1 - B
4) LEAD CONFIGURATION : SEE FIGURE 1-C, 1-D
ELECTRICAL CHARACTERISTICS (AT 25 ± 5 )
1) CIRCUIT CONFIGURATION : THREE-TERMINAL SENSOR WITH SOURCE FOLLOWER SEE FIGURE 2
2) OPERATING VOLTAGE : 3 10 V DC (Rs : 47 Kз)
3) SOURCE VOLTAGE : 0. 35 1. 5 V (VD : 5V, Rs : 47 Kз)
4) SIGNAL OUTPUT : MIN. 2. 5 Vp - p (TYP. 4. 0 Vp - p)
SIGNAL OUTPUT IS MEASURED AT CHOPPER FREQUENCY OF 1 г WHEN CONNECTED TO THE AMPLIFIER OF GAIN 72. 5 Ъ
(AT 1 г) AND SUBMITTED TO THE EMISSION OF INFRARED ENERGY OF 13 / Р FROM 420 K BLACK BODY.
SEE FIGURE 3
5) NOISE OUTPUT : MAX. 250 mVp - p (TYP. 90 mVp - p) NOISE OUTPUT SHALL BE MEASURED FOR 20 SECONDS WHEN
CONNECTED TO THE AMPLIFIER OF GAIN 72. 5 dB AND SHUT OUT FROM INFRARED ENERGY.
SEE FIGURE 3
6) BALANCE OUTPUT : MAX. 15 %
BO / I SA+SB I 〕 ÷ 0. 15
BO : BALANCE OUTPUT
SA : SIGNAL OUTPUT ON ELEMENT A
SB : SIGNAL OUTPUT ON ELEMENT B
BALANCE OUTPUT IS MEASURED AT CHOPPER FREQUENCY OF 1 Hz WHEN CONNECTED TO THE AMPLIFIER OF GAIN 72. 5 dB
( AT 1 Hz ) AND SUBMITTED TO THE EMISSION OF INFRARED ENERGY OF 13 u W/ Р FROM 420 K BLACK BODY.
SEE FIGURE 3
7) FREQUENCY RESPONSE : 0. 3 Hz TO 3. 0 Hz / ± 10 dB
OPTICAL CHARACTERISTICS
1) FIELD OF VIEW : 138° FROM EDGE OF ELEMENT ON AXIS X : 125° FROM EDGE OF ELEMENT ON AXIS Y : SEE FIGURE
1-A
2) FIELTER SUBSTRATE : SILICON
3) CUT ON (5 % T ABS) : 5. 0 ± 0. 5 um
4) TRANSMISSION : 70 % AVERAGE 7 14 Л
ENVIRONMENTAL REQUIREMENTS
1) OPERATING TEMPERATURE : -30 TO + 70
2) STORAGE TEMPERATURE : -40 TO + 80
3) RELATIVE HUMIDITY : THE SENSOR SHALL OPERATE WITHOUT INCREASE IN NOISE OUTPUT WHEN EXPOSED TO 90 95
RH AT 30 CONTINUOUSLY.
4) HERMETIC SEAL : THE SENSOR SHALL BE SEALED TO WITHSTAND A VACUUM OF 160 MILLIMETERS OF MERCURY.

1 Page







ページ 合計 : 4 ページ
 
PDF
ダウンロード
[ RE200B.PDF ]


共有リンク

Link :


おすすめデータシート

部品番号部品説明メーカ
RE200B

Pyroelectric Passive Infrared Sensor

Nippon Seramic
Nippon Seramic
RE200B

Pyroelectric Passive Infrared Sensor

ETC
ETC
RE200B

high-sensitive heat-induction sensor chip

SilvanChip
SilvanChip


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap