DataSheet.es    


PDF SM1145BD Data sheet ( Hoja de datos )

Número de pieza SM1145BD
Descripción CMOS COMPATIBLE WITH TRI-STATE OUTPUT
Fabricantes Pletronics 
Logotipo Pletronics Logotipo



Hay una vista previa y un enlace de descarga de SM1145BD (archivo pdf) en la parte inferior de esta página.


Total 2 Páginas

No Preview Available ! SM1145BD Hoja de datos, Descripción, Manual

SM1100BD SERIES
n CMOS COMPATIBLE WITH TRI –STATE OUTPUT
n 3RD OVERTONE MODE CRYSTAL USED
n LOW JITTER (SEE TABLE NEXT PAGE)
n LEADLESS SURFACE MOUNT PACKAGE WITH PC BOARD BASE/ METAL COVER FOR LOW EMI
n MORE ECONOMICAL THAN OUR SM1100JD FOR 70 MHz AND HIGHER FREQUENCIES
n LAND PATTERN COMPATIBLE TO OUR ENTIRE SM1100X SERIES, EPSON SG615 & SG8002J
STANDARD SPECIFICATIONS:
Frequency Range
Frequency Stability over Operating
Temperature Range
Operating Temperature Range
Input Voltage (Vcc)
Symmetry (Duty Cycle)
(See waveform for definition.)
Input Current (Icc) & Rise and Fall Time
(Tr & Tf) & Jitter
Logic “1” & Logic “0” (See waveform)
Tri-state Output
Output Load
Packaging (see page R1, Figure 3)
70.000 MHz – 125.000 MHz (up to 160.0 MHz under development)
(Consult factory for specific available frequencies)
± 50 PPM is standard, but ± 25 PPM is also available
0 - 70°C is standard, but can be extended to 40 to +85°C.
5 Volt ± 10% is standard, but 3.3 Volt ± 10% also available
40/60 - 60/40% is standard, but 45/55% symmetry is also available.
Depends on the frequency and output load. See next page.
90% of Vcc MIN.; 10% of Vcc MAX.
Normal output when pin #1 is open (no connection);
Normal output when pin #1 is at logic “1”;
High-impedance output when pin #1 is at logic “0”.
Can drive up to 50 pF
28 parts per tube or 24 mm tape, 330mm reel: 500 parts per reel
PART NUMBERING GUIDE:
n The Pletronics part number for an SM1100BD series oscillator consists of the following 3 elements:
1. Overall Frequency Stability over Operating Temperature Range:
SM1145BD: ± 50 PPM;
SM1144BD: ± 25 PPM
2. Optional Alphabet Designator for Special Requirement:
SM1145BDY: standard specifications;
SM1145BDE: operating temperature range of –40 to +85°C;
SM1145BDS: 45/55% symmetry at 50% of Vcc;
SM1145BDV: operates at Vcc = 3.3V
(There are other alphabet designators not listed here.)
3. Frequency of Operation in MHz
EXAMPLES: SM1145BDV-70.000 MHz, SM1145BDE-70.000 MHz, SM1144BDY-70.000 MHz
n When customer’s requirements are non-standard, a special engineering part number will be assigned.
(continued)
Telephone: (425) 776-1880, Fax: (425) 776-2760, e-mail: [email protected]
O12A

1 page





PáginasTotal 2 Páginas
PDF Descargar[ Datasheet SM1145BD.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
SM1145BCMOS COMPATIBLE WITH TRI-STATE OUTPUTPletronics
Pletronics
SM1145BDCMOS COMPATIBLE WITH TRI-STATE OUTPUTPletronics
Pletronics

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar