|
|
TDA10H0SK1のメーカーはITTです、この部品の機能は「(TDA0xxx) Ultra Miniature Surface Mount Half Pitch DIP Switches」です。 |
部品番号 | TDA10H0SK1 |
| |
部品説明 | (TDA0xxx) Ultra Miniature Surface Mount Half Pitch DIP Switches | ||
メーカ | ITT | ||
ロゴ | |||
このページの下部にプレビューとTDA10H0SK1ダウンロード(pdfファイル)リンクがあります。 Total 1 pages
C&K TDA Series
Ultra-miniature Surface Mount Half-pitch DIP Switches
Features/Benefits
• Bifurcated contact for
increased electrical reliability
• Tin-lead plated terminals for
reliable solder coverage
• Process sealed for surface
mount soldering and washable
processing
Typical Applications
• Hand-held electronic devices
• Portable computer and
electronic devices
• Instrumentation and controls
H
How To Order
Complete part numbers for TDA Series are shown below. All switches supplied in “OFF” position.
Specifications
SWITCH FUNCTION: SPST – 2, 4, 6, 8 & 10 positions.
CONTACT RATING:
24 V DC, 25 mA (switching).
50 V DC, 100 mA (steady state).
MECHANICAL AND ELECTRICAL LIFE: 1,000 cycles.
CONTACT RESISTANCE: 100 milliohms max.
INSULATION RESISTANCE: 100 megohms @ 100 V DC min.
DIELECTRIC STRENGTH: 300 V AC min.
STORAGE TEMPERATURE: -40°C to 85°C.
OPERATING TEMPERATURE: -20°C to 85°C.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
PACKAGING: Switches supplied in rigid dispensing tubes in full
tube quantities only, this may affect order quantity. Numbers of
switches per tube varies with model. Tape and reel packaging
also available.
Materials
CASE & COVER: glass filled PPA (UL94V-0).
ACTUATOR: LCP (UL94V-0).
CONTACTS: Copper alloy, with gold plate over nickel plate.
TERMINALS: Copper alloy, with tin-lead alloy over nickel plate.
All terminals are insert molded.
TAPE SEAL: Polyamide.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Tube Package
PART NUMBER
TDA02H0SK1
TDA04H0SK1
TDA06H0SK1
TDA08H0SK1
TDA10H0SK1
Schematic
NO. POS.
DIM. ‘A’
QUANTITY
PER TUBE
2
.144 (3,67)
125
4 .244 (6,21) 70
6 .344 (8,75) 50
8 .444 (11,29) 40
10 .544 (13,83)
30
SPST
.047
(1,2)
DIM 'A'
.050 .050
(1,27)
(1,27)
.032
(0,8)
ON C&K TDA08 CHAMFER
12345678
.300
(7,62)
.018
(0,45)
.016
(0,4)
TAPE SEAL
.086
(2,2)
Tape & Reel Package
PART NUMBER
TDA02H0SK1R
TDA04H0SK1R
TDA06H0SK1R
TDA08H0SK1R
TDA10H0SK1R
NO. POS.
DIM. ‘W’
QUANTITY
PER REEL
2
.630 (16,0)
2000
4
.630 (16,0)
2000
6
.630 (16,0)
2000
8
.945 (24,0)
2000
10
.945 (24,0)
2000
MARKING LABEL
EMBOSSED
CARRIER
PIN#1
OFFSET FROM PILOT HOLE
.090
(2,3)
.022
(0,57)
.042
(1,06)
.079 REF
(2,0)
.472
(12,0)
H-3
.030
(0,76)
.250 .350
(6,35) (8,89)
TDA08H0SK1
.244
(6,2)
.236
(6,0)
.320
(8,12)
.006
(0,15)
DIM 'W'
SEE CHART
Third Angle
Projection
Dimensions are shown inch (mm)
Dimensions subject to change
www.ittcannon.com
1 Page | |||
ページ | 合計 : 1 ページ | ||
|
PDF ダウンロード | [ TDA10H0SK1 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
TDA10H0SK1 | (TDA0xxx) Ultra Miniature Surface Mount Half Pitch DIP Switches | ITT |
TDA10H0SK1R | (TDA0xxx) Ultra Miniature Surface Mount Half Pitch DIP Switches | ITT |