AN7809R Datasheet PDF - Panasonic
| Part Number | AN7809R | |
| Description | (AN78xxR) Voltage Regulator | |
| Manufacturers | Panasonic | |
| Logo |  |
|
|
There is a preview and AN7809R download ( pdf file ) link at the bottom of this page. Total 6 Pages | ||
Preview 1 page No Preview Available !
AN7800R/AN78M00R Series
Positive Output Voltage Regulators with
Reset pin (1A/500mA Type)
s Overview
The AN7800R and the AN78M00R series are the fixed
positive output voltage regulators with reset pin. Stabi-
lized fixed output voltage is obtained from unstable DC
input voltage without using any external components.
Three types of output voltage, 5V, 9V and 12V, are avail-
able for the AN7800R series, and four types, 5V, 8V, 9V
and 12V, are available for the AN78M00R series. They
can be used in power circuits with current capacitance
1A/500mA. ON/OFF of output voltage can be controlled
by the reset pin.
s Features
• No external components
• Maximum output current :1A (AN7800R)
500mA (AN78M00R)
• Output voltage :5V, 9V, 12V (AN7800R)
:8V (AN78M08R)
• Short-circuit current limiting built-in
• Thermal overload protection built-in
• Output transistor safe area compensation
• ON/OFF of output voltage can be controlled by reset
pin.
+ 0.5
9.6 – 0.1
ø 3.1
Unit:mm
3–1.0
1.8
0.7±0.2
0.5±0.1
2.3 2.3 2.3
1.5 1.3
4-pin SIL Plastic Package with Fin (SSIP004-P-0000)
s Block Diagram
Current
Source
1 Input
Pass Tr
Q1
Current
Limiter
RSC
3 Output
Starter
Voltage
Reference
+
Error Amp.
–
Thermal
Protection
4 Reset
R2
R1
2 Common
|
| |
 
s Electrical Characteristics (Ta=25˚C)
· AN78M09R (500mA, 9V Type)
Parameter
Symbol
Condition
min typ max Unit
Output voltage
Output voltage tolerance
Line regulation
Load regulation
VO
VO
REGIN
REGL
Tj=25˚C
VI=11.5 to 24V, IO=5 to 350mA,
Tj=0 to 125˚C, PD <= 15W
VI=11.5 to 25V, Tj=25˚C
VI=12 to 25V, Tj=25˚C
IO=5 to 500mA, Tj=25˚C
IO=5 to 200mA, Tj=25˚C
8.65
8.55
9 9.35
9.45
7 100
2 50
25 180
10 90
V
V
mV
mV
mV
mV
Bias current
Input bias current fluctuation
Load bias current fluctuation
Output noise voltage
Ibias
∆Ibias (IN)
∆Ibias (L)
Vno
Tj=25˚C
VI=12 to 25V, Tj=25˚C
IO=5 to 350mA, Tj=25˚C
f=10Hz to 100kHz
4.1 6.0 mA
0.8 mA
0.5 mA
60 µV
Ripple rejection ratio
RR VI=12 to 22V, IO=100mA, f=120Hz
56
Minimum input/output voltage difference VDIF (min.) IO=500mA, Tj=25˚C
2
dB
V
Output short circuit current
IO (Short)
VI=35V, Tj=25˚C
300 mA
Peak output current
Output voltage temperature coefficient
Output voltage at reset
Reset input current
IO (Peak)
∆VO/Ta
VO (Reset)
II (Reset)
Tj=25˚C
IO=5mA, Tj=0 to 125˚C
Tj=25˚C, II (Reset)=1mA
Tj=25˚C
0.7
– 0.5
A
mV/˚C
1V
1 mA
Note 1) The specified condition Tj=25˚C means that the test should be carried out with the test time so short (within 10ms) that the
drift in characteristic value due to the rise in chip junction temperature can be ignored.
Note 2) When not specified, VI=15V, IO=350mA, CI=0.33µF, CO=0.1µF, Tj=0 to 125˚C
· AN78M12R (500mA, 12V Type)
Parameter
Symbol
Condition
min typ max Unit
Output voltage
Output voltage tolerance
Line regulation
VO
VO
REGIN
Tj=25˚C
VI=14.5 to 27V, IO=5 to 350mA,
Tj=0 to 125˚C, PD <= 15W
VI=14.5 to 30V, Tj=25˚C
VI=16 to 30V, Tj=25˚C
11.5
11.4
12 12.5
12.6
8 100
2 50
V
V
mV
mV
Load regulation
REGL
IO=5 to 500mA, Tj=25˚C
IO=5 to 200mA, Tj=25˚C
25 240 mV
10 120 mV
Bias current
Ibias Tj=25˚C
4.3 6 mA
Input bias current fluctuation
Load bias current fluctuation
Output noise voltage
∆Ibias (IN)
∆Ibias (L)
Vno
VI=14.5 to 30V, Tj=25˚C
IO=5 to 350mA, Tj=25˚C
f=10Hz to 100kHz
0.8 mA
0.5 mA
75 µV
Ripple rejection ratio
RR VI=15 to 25V, IO=100mA, f=120Hz
55
dB
Minimum input/output voltage difference VDIF (min.) IO=500mA, Tj=25˚C
2V
Output short circuit current
IO (Short)
VI=35V, Tj=25˚C
300 mA
Peak output current
Output voltage remperature coefficient
Output voltage at reset
Reset input current
IO (Peak)
∆VO/Ta
VO (Reset)
II (Reset)
Tj=25˚C, VI=35V
IO=5mA, Tj=0 to 125˚C
Tj=25˚C, II (Reset)=1mA
Tj=25˚C
700
– 0.5
mA
mV/˚C
1V
1 mA
Note 1) The specified condition Tj=25˚C means that the test should be carried out with the test time so short (within 10ms) that the
drift in characteristic value due to the rise in chip junction temperature can be ignored.
Note 2) When not specified, VI=19V, IO=350mA, CI=0.33µF, CO=0.1µF, Tj=0 to 125˚C
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for AN7809R electronic component. |
| Information | Total 6 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ AN7809R.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| AN7809 | The function is (AN78xx/F) 3-pin positive output voltage regulator (1 A type). Panasonic Semiconductor |  |
| AN7809F | The function is (AN78xx/F) 3-pin positive output voltage regulator (1 A type). Panasonic Semiconductor | |
| AN7809NSP | The function is (AN78xxNSP) 3-pin positive output voltage regulator (1 A type). Panasonic Semiconductor | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
AN78
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||