No Preview Available !
PC817 Series
PC817 Series
High Density Mounting Type
Photocoupler
..g Lead forming type ( I type ) and taping reel type ( P type ) are also available. ( PC817I/PC817P )
gg TUV ( VDE0884 ) approved type is also available as an option.
s Features
s Applications
1. Current transfer ratio
( CTR: MIN. 50% at I F = 5mA ,VCE=5V)
2. High isolation voltage between input and
output ( Viso : 5 000V rms )
3. Compact dual-in-line package
1. Computer terminals
2. System appliances, measuring instruments
3. Registers, copiers, automatic vending
machines
4. Electric home appliances, such as fan
PC817 : 1-channel type
heaters, etc.
PC827 : 2-channel type
PC837 : 3-channel type
PC847 : 4-channel type
5. Signal transmission between circuits of
different potentials and impedances
4. Recognized by UL, file No. E64380
s Outline Dimensions
( Unit : mm)
PC817
2.54 ± 0.25
4
CTR
rank mark
3
Anode mark
1
2
0.9 ± 0.2
1.2 ± 0.3
4.58 ± 0.5
0.5 ± 0.1
Internal connection diagram
43
PC827
2.54 ± 0.25
87 6 5
12
7.62 ± 0.3
0.26 ± 0.1
θθ
θ = 0 to 13 ˚
Anode
mark
1
2 34
0.9 ± 0.2
1.2 ± 0.3
1 Anode
2 Cathode
3 Emitter
4 Collector
9.66 ± 0.5
0.5 ± 0.1
Internal connection diagram
87 65
12 34
7.62 ± 0.3
1 3 Anode
2 4 Cathode
5 7 Emitter
6 8 Collector
0.26 ± 0.1
θθ
θ= 0 to 13 ˚
PC837
2.54 ± 0.25
12 11 10 9 8 7
Internal connection
diagram
12 11 10 9 8 7
PC847
2.54 ± 0.25
16 15 14 13 12 11 10 9
Internal connection
diagram
16 15 14 13 12 11 10 9
1 2 34 56
0.9 ± 0.2
1.2 ± 0.3
14.74 ± 0.5
0.5 ± 0.1
12 34 56
1 3 5 Anode
2 4 6 Cathode
7 9 11 Emitter
8 10 12 Collector
7.62 ± 0.3
0.26 ± 0.1
θθ
θ = 0 to 13 ˚
1 2 34 56 78
0.9 ± 0.2
1.2 ± 0.3
19.82 ± 0.5
12 34 56 78
7.62 ± 0.3
0.5 ± 0.1
1 3 5 7 Anode
2 4 6 8 Cathode
0.26 ± 0.1
θθ
θ = 0 to 13 ˚
9 11 13 15 Emitter
10 12 14 16 Collector
“ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs,
data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.”
Application Circuits
NOTICE
qThe circuit application examples in this publication are provided to explain representative applications of
SHARP devices and are not intended to guarantee any circuit design or license any intellectual property
rights. SHARP takes no responsibility for any problems related to any intellectual property right of a
third party resulting from the use of SHARP's devices.
qContact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
SHARP reserves the right to make changes in the specifications, characteristics, data, materials,
structure, and other contents described herein at any time without notice in order to improve design or
reliability. Manufacturing locations are also subject to change without notice.
qObserve the following points when using any devices in this publication. SHARP takes no responsibility
for damage caused by improper use of the devices which does not meet the conditions and absolute
maximum ratings to be used specified in the relevant specification sheet nor meet the following
conditions:
(i) The devices in this publication are designed for use in general electronic equipment designs such as:
--- Personal computers
--- Office automation equipment
--- Telecommunication equipment [terminal]
--- Test and measurement equipment
--- Industrial control
--- Audio visual equipment
--- Consumer electronics
(ii)Measures such as fail-safe function and redundant design should be taken to ensure reliability and
safety when SHARP devices are used for or in connection with equipment that requires higher
reliability such as:
--- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.)
--- Traffic signals
--- Gas leakage sensor breakers
--- Alarm equipment
--- Various safety devices, etc.
(iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely
high level of reliability and safety such as:
--- Space applications
--- Telecommunication equipment [trunk lines]
--- Nuclear power control equipment
--- Medical and other life support equipment (e.g., scuba).
qContact a SHARP representative in advance when intending to use SHARP devices for any "specific"
applications other than those recommended by SHARP or when it is unclear which category mentioned
above controls the intended use.
qIf the SHARP devices listed in this publication fall within the scope of strategic products described in the
Foreign Exchange and Foreign Trade Control Law of Japan, it is necessary to obtain approval to export
such SHARP devices.
qThis publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under
the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any
means, electronic or mechanical, for any purpose, in whole or in part, without the express written
permission of SHARP. Express written permission is also required before any use of this publication
may be made by a third party.
qContact and consult with a SHARP representative if there are any questions about the contents of this
publication.
115