DataSheet.jp

HCPL-J454 の電気的特性と機能

HCPL-J454のメーカーはHewlett-Packardです、この部品の機能は「High CMR / High Speed Optocouplers」です。


製品の詳細 ( Datasheet PDF )

部品番号 HCPL-J454
部品説明 High CMR / High Speed Optocouplers
メーカ Hewlett-Packard
ロゴ Hewlett-Packard ロゴ 




このページの下部にプレビューとHCPL-J454ダウンロード(pdfファイル)リンクがあります。

Total 20 pages

No Preview Available !

HCPL-J454 Datasheet, HCPL-J454 PDF,ピン配置, 機能
High CMR, High Speed
Optocouplers
Technical Data
HCPL-4504
HCPL-J454
HCPL-0454
HCNW4504
Features
• Short Propagation Delays
for TTL and IPM
Applications
• 15 kV/µs Minimum Common
Mode Transient Immunity at
VCM = 1500 V for TTL/Load
Drive
• High CTR at TA = 25°C
>25% for HCPL-4504/0454
>23% for HCNW4504
>19% for HCPL-J454
• Electrical Specifications for
Common IPM Applications
• TTL Compatible
• Guaranteed Performance
from 0°C to 70°C
• Open Collector Output
• Safety Approval
UL Recognized
- 3750 V rms / 1min. for
HCPL-4504/0454/J454
- 5000 V rms / 1min. for
HCPL-4504 Option020 and
HCNW4504
CSA Approved
IEC/EN/DIN EN 60747-5-2
Approved
- VIORM = 560 Vpeak for
HCPL-0454 Option060
- VIORM = 630 Vpeak for
HCPL-4504 Option060
- VIORM = 891 Vpeak for
HCPL-J454
- VIORM = 1414 Vpeak for
HCNW4504
Applications
• Inverter Circuits and
Intelligent Power Module
(IPM) interfacing -
High Common Mode Transient
Immunity (> 10 kV/µs for an
IPM load/drive) and (tPLH - tPHL)
Specified (See Power Inverter
Dead Time section)
• Line Receivers -
Short Propagation Delays and
Low Input-Output Capacitance
• High Speed Logic Ground
Isolation - TTL/TTL, TTL/
CMOS, TTL/LSTTL
Functional Diagram
NC 1
ANODE 2
CATHODE 3
NC 4
8 VCC
7 NC
6 VO
5 GND
• Replaces Pulse
Transformers -
Save Board Space and Weight
• Analog Signal Ground
Isolation -
Integrated Photodetector
Provides Improved Linearity
over Phototransistors
Description
The HCPL-4504 and HCPL-0454
contain a GaAsP LED while the
HCPL-J454 and HCNW4504
contain an AlGaAs LED. The LED
is optically coupled to an
integrated high gain photo
detector.
The HCPL-4504 series has short
propagation delays and high CTR.
The HCPL-4504 series also has a
guaranteed propagation delay
difference (tPLH-tPHL). These
TRUTH TABLE
LED
ON
OFF
VO
LOW
HIGH
A 0.1 µF bypass capacitor between pins 5 and 8 is recommended.
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to
prevent damage and/or degradation which may be induced by ESD.

1 Page





HCPL-J454 pdf, ピン配列
3
Package Outline Drawings
HCPL-4504 Outline Drawing
TYPE NUMBER
1.19 (0.047) MAX.
9.65 ± 0.25
(0.380 ± 0.010)
87
65
A XXXXZ
YYWW RU
12 34
OPTION CODE*
DATE CODE
UL
RECOGNITION
1.78 (0.070) MAX.
3.56 ± 0.13
(0.140 ± 0.005)
4.70 (0.185) MAX.
7.62 ± 0.25
(0.300 ± 0.010)
6.35 ± 0.25
(0.250 ± 0.010)
5° TYP.
0.254
+
-
0.076
0.051
(0.010+-
0.003)
0.002)
0.51 (0.020) MIN.
2.92 (0.115) MIN.
1.080 ± 0.320
(0.043 ± 0.013)
0.65 (0.025) MAX.
2.54 ± 0.25
(0.100 ± 0.010)
DIMENSIONS IN MILLIMETERS AND (INCHES).
* MARKING CODE LETTER FOR OPTION NUMBERS
"L" = OPTION 020
"V" = OPTION 060
OPTION NUMBERS 300 AND 500 NOT MARKED.
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
HCPL-4504 Gull Wing Surface Mount Option 300 Outline Drawing
9.65 ± 0.25
(0.380 ± 0.010)
87
65
LAND PATTERN RECOMMENDATION
1.016 (0.040)
6.350 ± 0.25
(0.250 ± 0.010)
10.9 (0.430)
12
34
1.19
(0.047)
MAX.
1.780
(0.070)
MAX.
3.56 ± 0.13
(0.140 ± 0.005)
1.27 (0.050)
9.65 ± 0.25
(0.380 ± 0.010)
7.62 ± 0.25
(0.300 ± 0.010)
2.0 (0.080)
0.254
+ 0.076
- 0.051
(0.010+-
0.003)
0.002)
1.080 ± 0.320
(0.043 ± 0.013)
2.54
(0.100)
BSC
0.635 ± 0.130
(0.025 ± 0.005)
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES).
0.635 ± 0.25
(0.025 ± 0.010)
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
12° NOM.


3Pages


HCPL-J454 電子部品, 半導体
6
HCNW4504 Gull Wing Surface Mount Option 300 Outline Drawing
11.15 ± 0.15
(0.442 ± 0.006)
87 6 5
LAND PATTERN RECOMMENDATION
9.00 ± 0.15
(0.354 ± 0.006)
1234
1.55
(0.061)
MAX.
(04..10508)MAX.
13.56
(0.534)
1.3
(0.051)
2.29
(0.09)
12.30 ± 0.30
(0.484 ± 0.012)
11.00
(0.433)
MAX.
1.78 ± 0.15
(0.070 ± 0.006)
2.54
(0.100)
BSC
0.75 ± 0.25
(0.030 ± 0.010)
1.00 ± 0.15
(0.039 ± 0.006)
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES).
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
0.254
+ 0.076
- 0.0051
(0.010+-
0.003)
0.002)
7° NOM.

6 Page



ページ 合計 : 20 ページ
 
PDF
ダウンロード
[ HCPL-J454 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
HCPL-J454

High CMR / High Speed Optocouplers

Hewlett-Packard
Hewlett-Packard
HCPL-J454

High Speed Optocouplers

AVAGO
AVAGO
HCPL-J456

Intelligent Power Module and Gate Drive Interface Optocouplers

Avago
Avago


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap