DataSheet.jp

UPA2780GR の電気的特性と機能

UPA2780GRのメーカーはNECです、この部品の機能は「SWITCHING N- AND P-CHANNEL POWER MOS FET」です。


製品の詳細 ( Datasheet PDF )

部品番号 UPA2780GR
部品説明 SWITCHING N- AND P-CHANNEL POWER MOS FET
メーカ NEC
ロゴ NEC ロゴ 




このページの下部にプレビューとUPA2780GRダウンロード(pdfファイル)リンクがあります。

Total 6 pages

No Preview Available !

UPA2780GR Datasheet, UPA2780GR PDF,ピン配置, 機能
DATA SHEET
MOS FIELD EFFECT TRANSISTOR
µ PA2780GR
SWITCHING
N-CHANNEL POWER MOS FET/SCHOTTKY BARRIER DIODE
DESCRIPTION
The µPA2780GR is N-channel Power MOSFET, which built a
Schottky Barrier Diode inside.
This product is designed for synchronous DC/DC converter
application.
PACKAGE DRAWING (Unit: mm)
85
1, 2, 3 : Source
4 : Gate
5, 6, 7, 8: Drain
FEATURES
Built a Schottky Barrier Diode
Low on-state resistance
RDS(on)1 = 6.2 mTYP. (VGS = 10 V, ID = 7 A)
RDS(on)2 = 8.7 mTYP. (VGS = 4.5 V, ID = 7 A)
RDS(on)3 = 10.3 mTYP. (VGS = 4.0 V, ID = 7 A)
Low Ciss: Ciss = 1200 pF TYP.
Small and surface mount package (Power SOP8)
ORDERING INFORMATION
PART NUMBER
µPA2780GR
PACKAGE
Power SOP8
14
5.37 MAX.
6.0 ±0.3
4.4
1.27 0.78 MAX.
0.40
+0.10
–0.05
0.12 M
0.5 ±0.2
0.8
0.10
EQUIVALENT CIRCUIT
ABSOLUTE MAXIMUM RATINGS (TA = 25°C. All terminals are connected.)
Drain to Source Voltage (VGS = 0 V)
VDSS
30
V
Gate to Source Voltage (VDS = 0 V)
Drain Current (DC) [MOSFET]
Drain Current (pulse) Note1
Average Forward Current Note2 [SCHOTTKY]
Total Power Dissipation Note3 [MOSFET]
Total Power Dissipation Note3 [SCHOTTKY]
VGSS
ID(DC)
ID(pulse)
IF(AV)
PT
PT
±20
±14
±56
2.5
2
1
V
A
A
A
W
W
Channel & Junction Temperature
Tch, Tj
150
°C
Storage Temperature
Tstg 55 to + 150 °C
Notes 1. PW 10 µs, Duty Cycle 1%
2. Rectangle wave, 50% Duty Cycle
3. Mounted on ceramic substrate of 1200 mm2 x 2.2 mm
Drain
Gate
Gate
Protection
Diode
Source
Schottky
Diode
Remark The diode connected between the gate and source of the transistor serves as a protector against ESD.
When this device actually used, an additional protection circuit is externally required if a voltage
exceeding the rated voltage may be applied to this device.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. G16419EJ1V0DS00 (1st edition)
Date Published April 2003 NS CP(K)
Printed in Japan
2002

1 Page





UPA2780GR pdf, ピン配列
µ PA2780GR
TYPICAL CHARACTERISTICS (TA = 25°C. All terminals are connected.)
DERATING FACTOR OF FORWARD BIAS
SAFE OPERATING AREA
120
100
80
60
40
20
0
0 20 40 60 80 100 120 140 160
TA - Ambient Temperature - °C
TOTAL POWER DISSIPATION vs.
AMBIENT TEMPERATURE
2.8
Mouted on ceramic substrate of
2.4 1200 mm2 x 2.2 mm
MOSFET
2
1.6
1.2 SCHOTTKY
0.8
0.4
0
0 20 40 60 80 100 120 140 160
TA - Ambient Temperature - °C
FORWARD BIAS SAFE OPERATING AREA
100
ID(pulse)
10
ID(DC)
RDS(on) Limited
(at VGS = 10 V)
1
Power Dissipation Limited
100 ms
PW = 100 µs
1 ms
10 ms
0.1
0.01
Single pulse
Mounted on ceramic substrate
of 1200 mm2 x 2.2 mm
0.01 0.1
1
DC
10 100
VDS - Drain to Source Voltage - V
1000
TRANSIENT THERMAL RESISTANCE vs. PULSE WIDTH (MOSFET)
100 Rth(ch-A) = 62.5°C/W
10
1
0.1
1m
10 m
Single pulse
Mounted on ceramic substrate of 1200 mm2 x 2.2 mm
100 m
1
10
PW - Pulse Width - s
100 1000
Data Sheet G16419EJ1V0DS
3


3Pages


UPA2780GR 電子部品, 半導体
µ PA2780GR
The information in this document is current as of April, 2003. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or
data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all
products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E 02. 11-1

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ UPA2780GR データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
UPA2780GR

SWITCHING N- AND P-CHANNEL POWER MOS FET

NEC
NEC


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap