|
|
PDF MOC8103 Data sheet ( Hoja de datos )
| Número de pieza | MOC8103 | |
| Descripción | (MOC8101 / MOC8102 / MOC8103 / MOC8104 / MOC8105) 6-Pin DIP Optoisolators for Power Supply Applications | |
| Fabricantes | Motorola Semiconductors | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MOC8103 (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
GlobalOptoisolator™
6-Pin DIP Optoisolators
for Power Supply Applications
(No Base Connection)
The MOC8101, MOC8102, MOC8103, MOC8104 and MOC8105 devices
consist of a gallium arsenide LED optically coupled to a silicon phototransistor
in a dual–in–line package.
• Closely Matched Current Transfer Ratio (CTR) Minimizes Unit–to–Unit Variation
• Narrow (CTR) Windows that translate to a Narrow and Predictable Open Loop Gain
Window
• Very Low Coupled Capacitance along with No Chip to Pin 6 Base Connection for
Minimum Noise Susceptibility
• To order devices that are tested and marked per VDE 0884 requirements, the
suffix “V” must be included at end of part number. VDE 0884 is a test option.
Applications
• Switchmode Power Supplies (Feedback Control)
• AC Line/Digital Logic Isolation
• Interfacing and coupling systems of different potentials and impedances
MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
INPUT LED
Forward Current — Continuous
Forward Current — Peak (PW = 100 µs, 120 pps)
Reverse Voltage
LED Power Dissipation @ TA = 25°C
Derate above 25°C
IF
IF(pk)
VR
PD
60 mA
1A
6 Volts
120 mW
1.41 mW/°C
OUTPUT TRANSISTOR
Collector–Emitter Voltage
Emitter–Collector Voltage
Collector Current — Continuous
Detector Power Dissipation @ TA = 25°C
Derate above 25°C
VCEO
VECO
IC
PD
30 Volts
7 Volts
150 mA
150 mW
1.76 mW/°C
TOTAL DEVICE
Input–Output Isolation Voltage(1)
(f = 60 Hz, t = 1 sec.)
VISO
7500
Vac(pk)
Total Device Power Dissipation @ TA = 25°C
Derate above 25°C
PD 250 mW
2.94 mW/°C
Ambient Operating Temperature Range(2)
Storage Temperature Range(2)
TA – 55 to +100
Tstg – 55 to +150
°C
°C
Lead Soldering Temperature
(1/16″ from case, 10 sec. duration)
TL 260 °C
1. Input–Output Isolation Voltage, VISO, is an internal device dielectric breakdown rating.
1. For this test, Pins 1 and 2 are common, and Pins 4 and 5 are common.
2. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions.
Preferred devices are Motorola recommended choices for future use and best overall value.
GlobalOptoisolator is a trademark of Motorola, Inc.
REV 1
Motorola Optoelectronics Device Data
Order this document
by MOC8101/D
MOC8101
[CTR = 50–80%]
MOC8102
[CTR = 73–117%]
MOC8103
[CTR = 108–173%]
MOC8104
[CTR = 160–256%]
MOC8105 *
[CTR = 65–133%]
*Motorola Preferred Device
STYLE 3 PLASTIC
61
STANDARD THRU HOLE
CASE 730A–04
SCHEMATIC
1 NC 6
25
3 NC
4
PIN 1. ANODE
2. CATHODE
3. NO CONNECTION
4. EMITTER
5. COLLECTOR
6. NO CONNECTION
1
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet MOC8103.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MOC8100 | OPTICALLY COUPLED ISOLATOR PHOTOTRANSISTOR OUTPUT |  ETC |
| MOC8100-M | GENERAL PURPOSE 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS |  Fairchild Semiconductor |
| MOC8101 | (MOC8101 / MOC8102 / MOC8103 / MOC8104 / MOC8105) 6-Pin DIP Optoisolators for Power Supply Applications | Motorola Semiconductors |
| MOC8101 | (MOC8101X - MOC8105X) NON-BASE LEAD OPTICALLY COUPLED ISOLATOR PHOTOTRANSISTOR OUTPUT |  ISOCOM COMPONENTS |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |