AN718 Datasheet PDF - Vishay Intertechnology
| Part Number | AN718 | |
| Description | Powering The Pentium Vre With The Si9145 Voltage Mode Controlled PWM Converter | |
| Manufacturers | Vishay Intertechnology | |
| Logo |  |
|
|
There is a preview and AN718 download ( pdf file ) link at the bottom of this page. Total 8 Pages | ||
Preview 1 page No Preview Available !
AN718
Vishay Siliconix
AN718
Powering the Pentium™ VRE with the Si9145 Voltage Mode
Controlled PWM Converter
BENEFITS
• First and only Intel-approved switching converter solution to
provide static and dynamic voltage regulation for the
Pentium VRE microprocessor.
• Low cost
• Efficiency greater than 89% at 7 A
• Eliminates the need for heat sinks
• Supplies maximum currents required by P54C
• High operating frequency (recommended 375 kHz) allows
use of the smallest possible inductors and capacitors,
resulting in lowest voltage ripple and best transient
response
• Easily adjustable output voltage to meet the different specs
of P54C family.
• PCB layout available
• Available in SO-16 surface-mount package
A PROVEN SOLUTION FOR THE PENTIUM™
CONVERTER
Siliconix has developed the first and only Intel-approved
switching power supply solution for the Pentium VRE
microprocessor. Built on a leading-edge CBiC/D process, the
Si9145BY is the only voltage-mode controlled PWM IC
capable of switching up to 2 MHz and providing a 25-MHz
error amplifier. For the first time, a 100-kHz closed-loop
bandwidth switching converter can be designed to meet the
dynamic transient requirements of the Pentium
microprocessor, without adding numerous output capacitors.
The Si9145BY consistently satisfies Pentium VRE voltage
regulation limits within generous margins. Worst-case
assumptions for voltage regulation, as provided by Intel, are
displayed in Figure 2.
REGULATION REQUIREMENTS FOR THE VRE
PENTIUM CONVERTER
The Pentium VRE microprocessor has been designed to
operate faster and more efficiently than any of its
predecessors. To save power, a CPU clock has been
implemented with start/stop features, requiring an ultra-fast
response from the power supply. To obtain higher clock
speeds and to enhance manufacturing yields, the Pentium
requires specific output voltage levels with tight voltage
regulations (Figure 3). Within this stringent voltage regulation
limit, no overshoot or undershoot are permitted to exceed the
regulation limit, irrespective of their duration. Not surprisingly,
these new demands have overwhelmed the capabilities of
existing power supply designs based on conventional PWM
ICs.
Meeting the tight static and transient regulation demands of
the Pentium VRE microprocessor requires a certain amount of
decoupling capacitance both at the processor and at the
output of the power supply. Obviously, the greater the
decoupling capacitance, the easier it is to meet the transient
regulation. Since cost and space limit the amount of
capacitance one can use, Intel has recommended the use of
six 100-µF low-ESR tantalum capacitors and twenty-five 1-µF
ceramic capacitors.
FIGURE 1. Typical Application Circuit
Pentium™ is a trademark of Intel Corporation.
FaxBack 408-970-5600, request 70588
www.siliconix.com
FIGURE 2. Intel Measured Transient Response
1
|
| |
 
AN718
Vishay Siliconix
Notes
a. R24 and R25 are designed in the circuit to provide the flexibility to remote sense. Remove R24 if remote sensing is utilized. Remove R25 if
remote sensing is not utilized.
b. Remove R17 to float the PWRGOOD signal. The new version of the Intel specification requires the PWRGOOD signal to be an open-collector
output or floating.
FIGURE 5. Pentium Converter
FaxBack 408-970-5600, request 70588
www.siliconix.com
5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for AN718 electronic component. |
| Information | Total 8 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ AN718.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| AN7105 | The function is Single Chip Stereo Pre Amplifier / Power Amplifier Circuit. Panasonic |  |
| AN7106K | The function is Single Chip Stereo Pre-Amplifier / Power Amplifier Circuit. Panasonic | |
| AN7108 | The function is 1-Chip Stereo Pre-Amplifier / Power Amplifier Circuit. Matsushita Electric |  |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
AN71
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||