|
|
DS001AKAのメーカーはSonyです、この部品の機能は「Single-Panel Liquid Crystal Optical Engine for Rear Projectors」です。 |
部品番号 | DS001AKA |
| |
部品説明 | Single-Panel Liquid Crystal Optical Engine for Rear Projectors | ||
メーカ | Sony | ||
ロゴ | |||
このページの下部にプレビューとDS001AKAダウンロード(pdfファイル)リンクがあります。 Total 13 pages
DS001AKA
Single-Panel Liquid Crystal Optical Engine for Rear Projectors
For the availability of this product, please contact the sales office.
Description
The DS001AKA is a single-panel liquid crystal
optical engine for use in rear projectors, capable of
full-color displays without color filters (CF).
This engine provides a wide aspect ratio of 16:9,
such as those represented in HD.
The side-black function also allows an aspect ratio
of 4:3 in the NTSC/PAL mode. Up/down and/or right/
left inversion functions accommodate various mounting
methods.
Short projection distances are made possible
through the adoption of ultra-wide angle lenses. In
addition, a projection lens floating mechanism
delivers 30" to 60" projected images with minimal
image distortion.
A high intensity discharge (HID) lamp ensures high
luminance and low power consumption.
Features
• The number of active dots: 768,000
• Horizontal resolution: 600 TV lines
• NTSC/NTSC-WIDE/HD (band: 20MHz) mode selectable (PAL/PAL-WIDE mode also available through
conversion of scanned dot numbers by an external IC)
• Up/down and/or right/left inverse display function
• Side-black function
• 16:9 and 4:3 aspect-ratio switching function
• Full-color display with CF-less projection system
• High luminouce flux: normally-white 120 ANSIlm (typ.)
• Ultra-wide angle lenses for short projection distances (531mm/37", at 4.5% overscanning)
• Image distortion correction floating mechanism to support 30" to 60"
• Relative illumination: 70% or above
• Uses HID lamp (100W)
Engine Configuration
• HID lamp
• Lamp driver (DC 300V input)
• High-efficiency illumination system employing glass rods
• Separate RGB illumination systems using dichroic mirrors (DM)
• LCD panel mounting mechanism, adjustable along XYθ axes
• LCD panel (LCX011AM)
Dots
16:9 display: 1599.5 (H) × 480 (V) = 767,760 dots
4:3 display: 1199.5 (H) × 480 (V) = 575,760 dots
• Wide fixed focal length lenses for enlarged projection of LCD
• Silent fans for cooling
Applications
Liquid crystal rear projection TV/monitor
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E97422A94-PS
1 Page Pin Description and Operating Conditions
Ambient Temperature
Optical engine unit (excluding lamp driver)
• Operating temperature
Topr
0 to +50
• Storage temperature
Tstg –20 to +60
Lamp driver unit
• Operating temperature
Topr –5 to +65
• Storage temperature
Tstg –40 to +85
Lamp Driver Unit
°C
°C
°C (under forced air cooling)
°C
DS001AKA
To lamp
Connector 2
1
2
3
Connector 1
1
3
SCI
GND
+5V
4.7kΩ
Signal output
(Flag output)
Pin Description
Connector 1
DC power supply input
1 positive (DC 300V)
2—
3 common
Connector JST (Japan Solderless Terminal)
type B 2P3-VH-B
Connector 2
SCI (start control input) and signal output
start control input (SCI)
GND
signal output (flag output)
JST (Japan Solderless Terminal)
B 3B-PH-K
Operating Conditions
Min. Typ. Max. Unit
Remarks
Input voltage
220 300 390 V
Power consumption
105 110 120 W
Circuit loss
— 10 15 W
Lamp output
95 100 105 W
Lamp startup peak voltage — — 25 kV
Start control input (SCI)
Input voltage
Lamp extinguish
Lamp light
— — 1.0 V Input current < 1.0mA
3.5 5.0 7.0 V Input current < 5.0mA
Signal output (flag output)
Output voltage
Lamp extinguish
— — 1.0 V
Lamp light
3.5 —
—V
–3–
3Pages DS001AKA
1. Contrast ratio
Contrast ratio (CR) is given by the following formula.
L(White): Surface illuminance of the screen at the input signal amplitude VAC = 0.5V
L(Black): Surface illuminance of the screen at VAC = 4.5V
Both luminances are measured by System I.
CR = L (White)
L (Black)
2. Luminous flux
In measurement system I, the average of the luminance at the nine points specified in ANSI standards when
the input signal amplitude VAC is 0.5V, multiplied by the effective display area, is computed.
L = average illuminance at nine ANSI points (lm/m2) × effective display area (m2)
H/3 H/3 H/3
nine ANSI points: centers of each of the
areas obtained by dividing
the effective display area
into nine smaller areas
H
3. Chromaticity
Raster modes of each color are defined by the representations at the input signal amplitude conditions shown
in the table below.
System I uses chromaticity of x and y on the CIE standards here.
Signal amplitude (VAC) supplied to each input
R input
G input
B input
R 0.5 4.5 4.5
G 4.5 0.5 4.5
B 4.5 4.5 0.5
(Unit: V)
4. Color uniformity
In the measurement system I, the maximum values of the CIE color differences at the three points in the
middle row of the nine ANSI points, measured at an input signal amplitude VAC of 0.5V, are used to compute
the color uniformity.
∆Wx = x max – x min
∆Wy = y max – y min
For other electro-optical characteristics, refer to the LCX011AM specifications.
–6–
6 Page | |||
ページ | 合計 : 13 ページ | ||
|
PDF ダウンロード | [ DS001AKA データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
DS001AKA | Single-Panel Liquid Crystal Optical Engine for Rear Projectors | Sony |