|
|
Número de pieza | SFC05-5 | |
Descripción | FLIP CHIP ARRAY | |
Fabricantes | ETC | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SFC05-5 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! Only One Name Means ProTek’Tion™
APPLICATIONS
✔ Cellular Phones
✔ Personnal Digital Assistant (PDA)
✔ Ground Positioning System (GPS)
✔ SMART & PCMCIA Cards
IEC COMPATIBILITY (EN61000-4)
✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV
✔ 61000-4-4 (EFT): 40A - 5/50ns
✔ 61000-4-5 (Surge): 24A, 8/20µs - Level 2(Line-Gnd) & Level 3(Line-Line)
FEATURES
✔ ESD Protection > 25 kilovolts
✔ 250 Watts Peak Pulse Power per Line (tp = 8/20µs)
✔ Protects up to Five(5) Unidirectional & Four (4) Bidirectional Lines
MECHANICAL CHARACTERISTICS
✔ Weight 0.73 milligrams (Approximate)
✔ Flammability Rating UL 94V-0
✔ 8mm Plastic & Paper Tape and Reel Per EIA Standard 481
✔ Device Marking On Reel
✔ Top Contacts: Solder Bump 0.004” in Height (Nominal)
SFC05-5
FLIP CHIP ARRAY
PENTA
PIN CONFIGURATION
654
05130.R6 8/03
1 23
BOTTOM VIEW
1
www.protekdevices.com
1 page PACKAGE OUTLINE & DIMENSIONS
MOUNTING PAD LAYOUT - Option 2
COPPER CONTACTS
0.009” [0.23] DIA.
A
DIE
SOLDER
BUMPS
E
SFC05-5
PACKAGE DIMENSIONS
DIM MILLIMETERS
A 1.5 NOM
B 0.152 NOM
C 0.510
D 0.990
E 0.510
INCHES
0.059
0.006 NOM
0.020
0.039
0.020
NOTES:
1. Controlling dimensions in inches.
2. Decimal tolerances for mounting pad and
outline: .xxx ± 0.05mm (± 0.002”).
3. Preferred: Using 0.1mm (0.004”) stencil.
Outline & Dimensions: Rev 0 - 10/02, 06039
TAPE & REEL ORIENTATION
SOLDER PRINT
0.014” [0.36] DIA.
SOLDER MASK
16
25
34
NOTE:
1. Top view of tape. Solder bumps are face
down in tape package.
TAPE & REEL ORDERING NOMENCLATURE
1. Surface mount product is taped and
reeled in accordance with EIA 481.
2. 8mm Plastic Tape: 7 Inch Reels - 5,000
pieces per reel. Ordering Suffix: -T75-1
(i.e., SFC05-5-T75-1).
3. 8mm Paper Tape: 7 Inch Reels - 5,000
pieces per reel. Ordering Suffix: -T75-2
(i.e., SFC05-5-T75-2).
COPYRIGHT © ProTek Devices 2003
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical
characteristics described herein without notice (except JEDEC).
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that
the final judgement concerning selection and specifications is the buyer’s and that in furnishing
engineering and technical assistance, ProTek assumes no responsibility with respect to the
selection or specifications of such products.
05130.R6 8/03
5
ProTek Devices
2929 South Fair Lane, Tempe, AZ 85282
Tel: 602-431-8101 Fax: 602-431-2288
E-Mail: [email protected]
Web Site: www.protekdevices.com
www.protekdevices.com
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet SFC05-5.PDF ] |
Número de pieza | Descripción | Fabricantes |
SFC05-4 | CSP TVS Flip Chip TVS Diode Array | Semtech Corporation |
SFC05-4TM | CSP TVS Flip Chip TVS Diode Array | Semtech Corporation |
SFC05-5 | FLIP CHIP ARRAY | ETC |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |