DataSheet.jp

MAR-B1021 の電気的特性と機能

MAR-B1021のメーカーはSanyoです、この部品の機能は「OPERATING INSTRUCTIONS」です。


製品の詳細 ( Datasheet PDF )

部品番号 MAR-B1021
部品説明 OPERATING INSTRUCTIONS
メーカ Sanyo
ロゴ Sanyo ロゴ 




このページの下部にプレビューとMAR-B1021ダウンロード(pdfファイル)リンクがあります。
Total 12 pages

No Preview Available !

MAR-B1021 Datasheet, MAR-B1021 PDF,ピン配置, 機能
OPERATING
INSTRUCTIONS
MAR-B1021
AM/FM Stereo Radio with
Auto-Reverse Cassette Player

1 Page





MAR-B1021 pdf, ピン配列
ACCESSORIES
Please retain the carton and packing materials, as this is the best protection for the
unit should it be necessary to return it for servicing.
Check the packing carefully for the following accessories:
(1) 2 x Screw 5x14mm (used to fix the mounting bracket to the eye/support bracket).
(2) 1 x Hexagon Nut (used for fixing the mounting bracket to the eye/support bracket).
(3) 1 x Metal Bracket
(7) 2 x Rubber Boots
(4) 1 x Front Panel
(8) 4 x Nuts
(5) 2 x VOL/TUN Knob
(9) 4 x Washer
(6) 2 x Outer Knob
(1) (2) (3)
Screw
(4)
Hexagon Nut
Metal Bracket
(5) (6)
Front Panel
(7)
VOL/TUN Knob
(8) 9)
Outer Knob
Rubber Boots Nut Washer
CAUTION
• This unit is designed to operate on 12 volts DC, negative ground electrical systems
only.
• When fuse replacement is necessary, use only a 5 amp fuse. Do not replace with
a higher rated fuse. If the fuse blows often, carefully check all electrical connections
for any short circuits and have your car’s voltage regulator checked also.
• Do not install the unit where it will be exposed to direct sunlight or hot air discharged
from the car heater.
• Do not expose the unit to water or moisture.
• This AM/FM Radio with Cassette should not be adjusted or repaired by anyone
except qualified service personnel. If servicing is required, return the unit to an
authorized SANYO mobile audio dealer.
• Changes or modifications not expressly approved by SANYO may void the user’s
authority to operate this equipment.
• This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
1


3Pages


MAR-B1021 電子部品, 半導体
INSTALLATION
1. First, determine the correct shaft spacing required for your vehicle, then adjust the
spacing as necessary.
2. Install one shaft boot on each control shaft.
3. Install one shaft nut and one shaft washer on each control shaft. Determine the
correct positions for the shaft nuts by placing the unit in the dashboard.
4. From behind the dashboard, insert the unit through the dash opening. If the unit
protrudes too far, or not far enough, adjust the position of the shaft nuts.
(Once the correct position is found, it may be necessary to cut off excess material
to shorten the shaft boots.)
5. Attach the rear support bracket to the threaded stud on the rear of the stereo using
the supplied nut.
6. Attach the free end of the rear support bracket to the vehicle with the screw provided.
7. Secure the front of the unit with the supplied shaft washers and nuts.
NOTE: The faceplate is provided for use on automobiles which have enough space
surrounding the radio to accept the plate. Attach the faceplate to the stereo by
mounting the nuts and washers in front of the faceplate. (If the shafts have been
moved to the extreme outside position, it may be necessary to widen the openings
in the faceplate by using a round file.)
8. Attach the knobs to the control shafts.
4

6 Page



ページ 合計 : 12 ページ
 
PDF
ダウンロード
[ MAR-B1021 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
MAR-B1021

OPERATING INSTRUCTIONS

Sanyo
Sanyo


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap