|
|
74VHC08のメーカーはFairchild Semiconductorです、この部品の機能は「Quad 2-Input AND Gate」です。 |
部品番号 | 74VHC08 |
| |
部品説明 | Quad 2-Input AND Gate | ||
メーカ | Fairchild Semiconductor | ||
ロゴ | |||
このページの下部にプレビューと74VHC08ダウンロード(pdfファイル)リンクがあります。 Total 9 pages
December 2007
74VHC08
Quad 2-Input AND Gate
Features
■ High Speed: tPD = 4.3ns (Typ.) at TA = 25°C
■ High noise immunity: VNIH = VNIL = 28% VCC (Min.)
■ Power down protection is provided on all inputs
■ Low power dissipation: ICC = 2µA (Max.) @ TA = 25°C
■ Low noise: VOLP = 0.8V (Max.)
■ Pin and function compatible with 74HC08
General Description
The VHC08 is an advanced high speed CMOS 2 Input
AND Gate fabricated with silicon gate CMOS technol-
ogy. It achieves the high-speed operation similar to
equivalent Bipolar Schottky TTL while maintaining the
CMOS low power dissipation.
The internal circuit is composed of 4 stages including
buffer output, which provide high noise immunity and
stable output. An input protection circuit insures that 0V
to 7V can be applied to the input pins without regard to
the supply voltage. This device can be used to interface
5V to 3V systems and two supply systems such as bat-
tery backup. This circuit prevents device destruction due
to mismatched supply and input voltages.
Ordering Information
Order Number
74VHC08M
74VHC08SJ
74VHC08MTC
Package
Number
M14A
M14D
MTC14
Package Description
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150"
Narrow
14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153,
4.4mm Wide
Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number.
All packages are lead free per JEDEC: J-STD-020B standard.
©1992 Fairchild Semiconductor Corporation
74VHC08 Rev. 1.4.0
www.fairchildsemi.com
1 Page Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
VCC
VIN
VOUT
IIK
IOK
IOUT
ICC
TSTG
TL
Parameter
Supply Voltage
DC Input Voltage
DC Output Voltage
Input Diode Current
Output Diode Current
DC Output Current
DC VCC / GND Current
Storage Temperature
Lead Temperature (Soldering, 10 seconds)
Rating
–0.5V to +7.0V
–0.5V to +7.0V
–0.5V to VCC + 0.5V
–20mA
±20mA
±25mA
±50mA
–65°C to +150°C
260°C
Recommended Operating Conditions(1)
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to absolute maximum ratings.
Symbol
Parameter
VCC
VIN
VOUT
TOPR
tr, tf
Supply Voltage
Input Voltage
Output Voltage
Operating Temperature
Input Rise and Fall Time,
VCC = 3.3V ± 0.3V
VCC = 5.0V ± 0.5V
Note:
1. Unused inputs must be held HIGH or LOW. They may not float.
Rating
2.0V to +5.5V
0V to +5.5V
0V to VCC
–40°C to +85°C
0ns/V ∼ 100ns/V
0ns/V ∼ 20ns/V
©1992 Fairchild Semiconductor Corporation
74VHC08 Rev. 1.4.0
3
www.fairchildsemi.com
3Pages Physical Dimensions
8.75
8.50
7.62
14
6.00
A
8
B
4.00
3.80
0.65
5.60
PIN ONE
INDICATOR
1
1.27
(0.33)
7
0.51
0.35
1.70 1.27
LAND PATTERN RECOMMENDATION
0.25 M C B A
1.75 MAX
1.50
1.25
R0.10
R0.10
8°
0°
SEE DETAIL A
0.25
0.10 C
0.10 C
0.25
0.19
NOTES: UNLESS OTHERWISE SPECIFIED
0.50
0.25
A) THIS PACKAGE CONFORMS TO JEDEC
X 45°
MS-012, VARIATION AB, ISSUE C,
B) ALL DIMENSIONS ARE IN MILLIMETERS.
C) DIMENSIONS DO NOT INCLUDE MOLD
GAGE PLANE FLASH OR BURRS.
D) LANDPATTERN STANDARD:
0.36
SOIC127P600X145-14M
E) DRAWING CONFORMS TO ASME Y14.5M-1994
F) DRAWING FILE NAME: M14AREV13
0.90
0.50
(1.04)
SEATING PLANE
DETAIL A
SCALE: 20:1
Figure 1. 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions,
specifically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
©1992 Fairchild Semiconductor Corporation
74VHC08 Rev. 1.4.0
6
www.fairchildsemi.com
6 Page | |||
ページ | 合計 : 9 ページ | ||
|
PDF ダウンロード | [ 74VHC08 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
74VHC00 | QUAD 2-INPUT NAND GATE | STMicroelectronics |
74VHC00 | Quad 2-Input NAND Gate | Fairchild Semiconductor |
74VHC00M | QUAD 2-INPUT NAND GATE | STMicroelectronics |
74VHC00M | Quad 2-Input NAND Gate | Fairchild Semiconductor |