|
|
PDF 74LVX16244TTR Data sheet ( Hoja de datos )
| Número de pieza | 74LVX16244TTR | |
| Descripción | 16-BIT BUS BUFFER (NON INVERTED) WITH 3-STATE OUTPUTS/ 5V TOLERANT INPUT | |
| Fabricantes | STMicroelectronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 74LVX16244TTR (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
|
No Preview Available !
74LVX16244
16-BIT BUS BUFFER (NON INVERTED)
WITH 3-STATE OUTPUTS, 5V TOLERANT INPUT
s HIGH SPEED: tPD = 5.3 ns (TYP.) at VCC = 3V
s 5V TOLERANT INPUT
s LOW POWER DISSIPATION:
ICC = 4 µA (MAX.) at TA=25°C
s INPUT VOLTAGE LEVEL : VIL= 0.8, VIH=2V
AT VCC=3V
s POWER DOWN PROTECTION ON INPUTS
& OUTPUTS
s SYMMETRICAL OUTPUT IMPEDANCE:
|IOH| = IOL = 4 mA (MIN)
s BALANCED PROPAGATION DELAYS:
tPLH ≅ tPHL
s OPERATING VOLTAGE RANGE:
VCC(OPR) = 2V to 3.6V (1.2V Data Retention)
s IMPROVED LATCH-UP IMMUNITY
s LOW NOISE: VOLP = 0.3V (TYP.) AT VCC=3V
DESCRIPTION
The 74LVX16244 is an advanced high-speed
CMOS 16-BIT BUS BUFFER (3-STATE)
fabricated with sub-micron silicon gate and
double-layer metal wiring C2MOS technology.
Any nG output control governs four BUS
BUFFERS. Output Enable inputs (nG) tied
together give full 16 bit operation.
When nG is LOW, the outputs are enabled. When
nG is HIGH, the output are in high impedance
state.
The device is designed to be used with 3-state
memory address drivers, etc.
Power down protection is provided on all inputs
and outputs and 0 to 7V can be accepted on
inputs with no regard to the supply voltage. This
device can be used to interface 5V to 3V.
All inputs and outputs are equipped with
protection circuits against static discharge, giving
them 2KV ESD immunity and transient excess
voltage.
TSSOP
ORDER CODES
PACKAGE
TSSOP
TUBE
PIN CONNECTION
T&R
74LVX16244TTR
February 2003
1/10
1 page  
74LVX16244
CAPACITIVE CHARACTERISTICS
Test Condition
Value
Symbol
Parameter
VCC
(V)
TA = 25°C
-40 to 85°C -55 to 125°C Unit
Min. Typ. Max. Min. Max. Min. Max.
Input Capacitance
CIN
6 10 10 10 pF
COUT
Output
Capacitance
8 pF
CPD Power Dissipation
Capacitance
3.0
(note 1)
fIN = 10MHz
20
pF
1) CPD is defined as the value of the IC’s internal equivalent capacitance which is calculated from the operating current consumption without
load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. ICC(opr) = CPD x VCC x fIN + ICC/16(per
circuit)
DYNAMIC SWITCHING CHARACTERISTICS
Test Condition
Value
Symbol
Parameter
VCC
(V)
TA = 25°C
-40 to 85°C -55 to 125°C Unit
Min. Typ. Max. Min. Max. Min. Max.
VOLP
VOLV
Dynamic Low
Voltage Quiet
Output (note 1, 2)
3.3
0.3 0.8
-0.8 -0.3
V
VIHD
Dynamic High
Voltage Input
(note 1, 3)
3.3 CL = 50 pF 2.0
V
VILD
Dynamic Low
Voltage Input
(note 1, 3)
3.3
0.8 V
1) Worst case package.
2) Max number of outputs defined as (n). Data inputs are driven 0V to 3.3V, (n-1) outputs switching and one output at GND.
3) Max number of data inputs (n) switching. (n-1) switching 0V to 3.3V. Inputs under test switching: 3.3V to threshold (VILD), 0V to threshold
(VIHD), f=1MHz.
5/10
5 Page | ||
| Páginas | Total 10 Páginas | |
| PDF Descargar | [ Datasheet 74LVX16244TTR.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 74LVX16244TTR | 16-BIT BUS BUFFER (NON INVERTED) WITH 3-STATE OUTPUTS/ 5V TOLERANT INPUT | STMicroelectronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |