|
|
MDF7P-22DP-2.54DSAのメーカーはHirose Electricです、この部品の機能は「2.54mm Pitch Bottom Entry Type Connector」です。 |
部品番号 | MDF7P-22DP-2.54DSA |
| |
部品説明 | 2.54mm Pitch Bottom Entry Type Connector | ||
メーカ | Hirose Electric | ||
ロゴ | |||
このページの下部にプレビューとMDF7P-22DP-2.54DSAダウンロード(pdfファイル)リンクがあります。 Total 7 pages
2.54mm Pitch Bottom Entry Type Connector
MDF7 Series
sFeatures
1. Board to Board Size Freely Settable
The board to board size can be set at infinite stages, according to the
header pin through type structure and the diverse header variation.
The board to board size can be set at infinite stages.
Board to Board size Freely settable
2. Integrity of Parts Mounted Surface
The parts mounted surface on two boards aren't face each other, and can
be oriented in the same direction.
3. Wide Variation
Single-row product, double-row product, tin plated and gold plated
products are lined up. In addition, the header to correspond to the board
to board size are prepared. Concerning board to board size, other
products can be provided, in addition to products in this catalog. Please
contact HRS company as required.
sApplications
Internal connection of telephone sets and OA/FA equipment, connection
between IPM, IGBT and the board.
A247
1 Page sSingle Row Receptacle
[Specific No.] –* *, (* *)
Blank :Tin plated
(01) :Gold plated
Unit: mm
Part Number
CL No. Number of Contacts A
B
Part Number
CL No. Number of Contacts A
B
MDF7- 3S-2.54DSA(**) 547-0355-0-**
3
7.62 5.08 MDF7-15S-2.54DSA(**) 547-0012-4-**
15
MDF7- 5S-2.54DSA(**) 547-0112-9-**
5 12.7 10.16 MDF7-16S-2.54DSA(**) 547-0141-7-** 16
MDF7- 6S-2.54DSA(**) 547-0129-1-**
6 15.24 12.7 MDF7-17S-2.54DSA(**) 547-0142-0-** 17
MDF7- 7S-2.54DSA(**) 547-0135-4-**
7 17.78 15.24 MDF7-18S-2.54DSA(**) 547-0013-7-** 18
MDF7- 8S-2.54DSA(**) 547-0136-7-**
8 20.32 17.78 MDF7-19S-2.54DSA(**) 547-0143-2-** 19
MDF7- 9S-2.54DSA(**) 547-0137-0-**
9 22.86 20.32 MDF7-20S-2.54DSA(**) 547-0051-6-** 20
MDF7-10S-2.54DSA(**) 547-0038-8-** 10 25.4 22.86 MDF7-21S-2.54DSA(**) 547-0144-5-** 21
MDF7-11S-2.54DSA(**) 547-0138-2-** 11 27.94 25.4 MDF7-22S-2.54DSA(**) 547-0145-8-** 22
MDF7-12S-2.54DSA(**) 547-0040-0-** 12 30.48 27.94 MDF7-23S-2.54DSA(**) 547-0146-0-** 23
MDF7-13S-2.54DSA(**) 547-0139-5-** 13 33.02 30.48 MDF7-24S-2.54DSA(**) 547-0147-3-** 24
MDF7-14S-2.54DSA(**) 547-0140-4-** 14 35.56 33.02 MDF7-25S-2.54DSA(**) 547-0014-0-** 25
Note: The quantity for delivery is determined per pack (100 pcs.). If needed, please order the products per pack.
38.1 35.56
40.64 38.1
43.18 40.64
45.72 43.18
48.26 45.72
50.8 48.26
53.34 50.8
55.88 53.34
58.42 55.88
60.96 58.42
63.5 60.96
sDouble Row Receptacle
Unit: mm
Part Number
CL No. Number of Contacts A
B
MDF7-12D-2.54DSA(**) 547-0032-1-** 12 15.24 12.7
MDF7-14D-2.54DSA(**) 547-0354-8-** 14 17.78 15.24
[Specific No.] –* *, (* *) (Note 2)
Blank :Gold plated
(01) :Tin plated
MDF7-16D-2.54DSA(**) 547-0363-9-** 16 20.32 17.78
MDF7-20D-2.54DSA(**) 547-0033-4-** 20 25.4 22.86
MDF7-22D-2.54DSA(**) 547-0246-5-** 22 27.94 25.4
MDF7-24D-2.54DSA(**) 547-0244-0-** 24 30.48 27.94
MDF7-26D-2.54DSA(**) 547-0247-8-** 26 33.02 30.48
MDF7-30D-2.54DSA(**) 547-0016-5-** 30 38.1 35.56
MDF7-34D-2.54DSA(**) 547-0227-0-** 34 43.18 40.64
MDF7-40D-2.54DSA(**) 547-0228-3-** 40 50.8 48.26
MDF7-46D-2.54DSA(**) 547-0229-6-** 46 58.42 55.88
Note 1: A quantity for delivery is determined per pack (100 pcs.). If needed, please order the products per pack.
Note 2: The MDF7 series 2-row plating specification is different from the single-row plating specification.
No-specification indicates the gold plating, and (01) indicates the tin plating.
A249
3Pages sSingle-Row Right Angle Pin Header
qBoard Through-hole Diameter: Ø1.0++00.1
[Specific No.] –* *, (* *)
Blank :Tin plated
(01) :Gold plated
Unit: mm
Part Number
CL No. Number of Contacts A
B
Part Number
CL No. Number of Contacts A
B
MDF7- 5P-2.54DS(**) 547-0160-1-** 5 12.7 10.16 MDF7-16P-2.54DS(**) 547-0169-6-** 16 40.64 38.1
MDF7- 6P-2.54DS(**) 547-0161-4-** 6 15.24 12.7 MDF7-17P-2.54DS(**) 547-0170-5-** 17 43.18 40.64
MDF7- 7P-2.54DS(**) 547-0162-7-** 7 17.78 15.24 MDF7-18P-2.54DS(**) 547-0019-3-** 18 45.72 43.18
MDF7- 8P-2.54DS(**) 547-0163-0-** 8 20.32 17.78 MDF7-19P-2.54DS(**) 547-0171-8-** 19 48.26 45.72
MDF7- 9P-2.54DS(**) 547-0164-2-** 9 22.86 20.32 MD7F-20P-2.54DS(**) 547-0172-0-** 20 50.8 48.26
MDF7-10P-2.54DS(**) 547-0165-5-** 10 25.4 22.86 MDF7-21P-2.54DS(**) 547-0173-3-** 21 53.34 50.8
MDF7-11P-2.54DS(**) 547-0166-8-** 11 27.94 25.4 MDF7-22P-2.54DS(**) 547-0174-6-** 22 55.88 53.34
MDF7-12P-2.54DS(**) 547-0116-0-** 12 30.48 27.94 MDF7-23P-2.54DS(**) 547-0175-9-** 23 58.42 55.88
MDF7-13P-2.54DS(**) 547-0167-0-** 13 33.02 30.48 MDF7-24P-2.54DS(**) 547-0176-1-** 24 60.96 58.42
MDF7-14P-2.54DS(**) 547-0168-3-** 14 35.56 33.02 MDF7-25P-2.54DS(**) 547-0028-4-** 25 63.5 60.96
MDF7-15P-2.54DS(**) 547-0027-1-** 15 38.1 35.56
Note: A quantity for delivery is determined per pack (100 pcs.). If needed, please order the products per pack.
BApplication Pattern and PCB mounting pattern
qWhen the single-row straight pin header is used
qWhen the header with locator is used
The locator moves as the connector is inserted.
qWhen the board to board size is set to MAX
To separate clearance between the boards, the operation limit t is defined as the
state where the male pin has passed through the receptacle.
qWhen the right angle pin header is used
A252
6 Page | |||
ページ | 合計 : 7 ページ | ||
|
PDF ダウンロード | [ MDF7P-22DP-2.54DSA データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
MDF7P-22DP-2.54DSA | 2.54mm Pitch Bottom Entry Type Connector | Hirose Electric |