|
|
Número de pieza | MDF14A-9P-2.5DS | |
Descripción | 2.5mm Pitch Board to Board Vertical Post Header | |
Fabricantes | Hirose Electric | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MDF14A-9P-2.5DS (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
No Preview Available ! 2.5mm Pitch Board to Board Vertical Post Header
MDF14A Series
sFeatures
1. Service Efficiency Up contact and contact.
The post header is developed in the special design capable
of vertically connecting the board unnecessary for insertion
or extraction.
The post header can be connected in combination of the
receptacle with the plug at low cost.
2. Current Capacity [5A]
By adopting the 0.8mm round pin as the post pin, the pin
strength can be enhanced as well as the current capacity
can be maintained at 5A approximately.
3. Board Pre-fixed Mechanism
The kink process is provided for the board pre-fix process.
4. Pin Extraction Specification
The post header corresponds to individual pin extraction
specifications.
sApplications
Various power supply units, and secondary power unit for
the set
Kink process
B136
1 page |
Páginas | Total 3 Páginas | |
PDF Descargar | [ Datasheet MDF14A-9P-2.5DS.PDF ] |
Número de pieza | Descripción | Fabricantes |
MDF14A-9P-2.5DS | 2.5mm Pitch Board to Board Vertical Post Header | Hirose Electric |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |