DataSheet.jp

LA5315M の電気的特性と機能

LA5315MのメーカーはSanyoです、この部品の機能は「Monolithic Linear IC」です。


製品の詳細 ( Datasheet PDF )

部品番号 LA5315M
部品説明 Monolithic Linear IC
メーカ Sanyo
ロゴ Sanyo ロゴ 




このページの下部にプレビューとLA5315Mダウンロード(pdfファイル)リンクがあります。

Total 6 pages

No Preview Available !

LA5315M Datasheet, LA5315M PDF,ピン配置, 機能
Ordering number:ENN3246
Monolithic Linear IC
LA5315M
Variable Divided Voltage Generator
for LCD Use
Overview
The LA5315M is a variable divided voltage generator IC
for multiple drive of LCD matrix.
Features
• Power supply for variable bias LCD drive (1/5 to 1/13
bias available by internal resistances).
• 5 voltage outputs.
• Low current drain (1.5mA max).
• Miniflat package.
Package Dimensions
unit:mm
3036B-MFP20
[LA5315M]
20 11
1 10
12.6
0.15
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Maximum supply voltage
Maximum output current
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
VCC max
IOUT max
Pd max
Topr
Tstg
GND-VCC
V1, V2, V3, V4, V5
0.35
Conditions
Operating Conditions at Ta = 25˚C
Parameter
Recommended supply voltage
Recommended input voltage
Recommended input current
Recommended output current
Symbol
VCC
VREF
IIN
IOUT1
IOUT2, 3
IOUT4, 5
Conditions
GND-VCC : (When V1>–1V, IIN is needed.) *
GND-VREF : VREFVCC *
VIN : V1>–1V, current source of IIN : 1V or greater
relative to GND
V1
V2, V3
V4, V5
note * Set VCC, VREF so that | V2 |, | VCC-V5 | become 1V or greater.
1.27 0.59
SANYO : MFP20
Ratings
–35 to 0
15
370
–20 to +75
–30 to +125
Unit
V
mA
mW
˚C
˚C
Ratings
–30 to –10
–30 to –6
Unit
V
V
0.2 to 3 mA
–0.1 to +5
–5 to +5
–10 to +0.1
mA
mA
mA
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
31500TN (KT)/9279TA TS No.3246–1/6

1 Page





LA5315M pdf, ピン配列
Pin Functions
Pin No.
1
2
3
4
5
6
7
8
9
10
Pin Name
RX6
RX5
RX4
RX3
RX2
RX1
VIN3
VIN2
11 VIN
12 GND
13 V1
14 V2
15 V3
16 V4
17 V5
18 VCC
19 VIN5
20 VREF
Description
RX pin
RX pin
RX pin
RX pin
RX pin
RX pin
NC
NC
V3 input
V2 input
V1 supply (+ supply)
GND
V1 output
V2 output
V3 output
V4 output
V5 output
VCC supply (–supply)
V5 input
VREF supply (–supply)
LA5315M
Remarks
Pin shorted RX=9R
Pin shorted RX=8R
Pin shorted RX=7R
Pin shorted RX=6R
Pin shorted RX=5R
Pin shorted RX=4R
When V1 > –1.0V, VIN is applied.
When V1 < –1.0V, this pin is shorted to GND.
Note ) Do not use the NC pin.
Pin Assingment
No.3246–3/6


3Pages


LA5315M 電子部品, 半導体
LA5315M
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of March, 2000. Specifications and information herein are subject to
change without notice.
PS No.3246–6/6

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ LA5315M データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
LA5315M

Monolithic Linear IC

Sanyo
Sanyo


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap