|
|
EGP20DのメーカーはGeneralです、この部品の機能は「GLASS PASSIVATED FAST EFFICIENT RECTIFIER」です。 |
部品番号 | EGP20D |
| |
部品説明 | GLASS PASSIVATED FAST EFFICIENT RECTIFIER | ||
メーカ | General | ||
ロゴ | |||
このページの下部にプレビューとEGP20Dダウンロード(pdfファイル)リンクがあります。 Total 2 pages
EGP20A THRU EGP20G
GLASS PASSIVATED FAST EFFICIENT RECTIFIER
Reverse Voltage - 50 to 400 Volts Forward Current - 2.0 Amperes
DO-204AC
1.0
(25.4)
MIN.
0.034 (0.86)
0.028 (0.71)
DIA.
0.300 (7.6)
0.230 (5.8)
® 1.0
(25.4)
MIN.
0.140 (3.6)
0.104 (2.6)
DIA.
Dimensions in inches and (millimeters)
*Glass-plastic encapsulation technique is covered by
Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306
FEATURES
♦ Plastic package has Underwriters Laboratories
Flammability Classification 94V-0
♦ Glass passivated cavity-free junction
♦ Superfast recovery time for high efficiency
♦ Low forward voltage, high current capability
♦ Low leakage current
♦ High surge current capability
♦ High temperature
metallurgically bonded construction
♦ High temperature soldering guaranteed:
300°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: JEDEC DO-204AC molded plastic over solid glass
body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.015 ounce, 0.4 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=55°C
Peak forward surge current,
8.3 ms single half sine-wave superimposed
on rated load
SYMBOLS
VRRM
VRMS
VDC
I(AV)
EGP
20A
50
35
50
EGP
20B
100
70
100
EGP
20C
EGP
20D
150 200
105 140
150 200
2.0
IFSM
75.0
Maximum instantaneous forward voltage at 2.0A
Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=125°C
Maximum reverse recovery time (NOTE 1)
Typical junction capacitance (NOTE 2)
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
VF
IR
trr
CJ
RΘJA
RΘJL
TJ, TSTG
0.95
5.0
100.0
50.0
70.0
40.0
15.0
-65 to +150
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient, and from junction to lead at 0.375” (9.5mm) lead length, P.C.B. mounted
EGP
20F
EGP
20G UNITS
300 400 Volts
210 280 Volts
300 400 Volts
Amps
Amps
1.25
45.0
Volts
µA
ns
pF
°C/W
°C
4/98
1 Page | |||
ページ | 合計 : 2 ページ | ||
|
PDF ダウンロード | [ EGP20D データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
EGP20 | 2.0 Amp Glass Passivated High Efficient Rectifiers 50 to 800 Volts | MCC |
EGP20 | GLASS PASSIVATED FAST EFFICIENT RECTIFIER | General |
EGP20A | SINTERED GLASS PASSIVATED JUNCTION HIGH EFFICIENT RECTIFIER | Zowie Technology |
EGP20A | GLASS PASSIVATED FAST EFFICIENT RECTIFIER | General |