|
|
IC11S-BUR-PEJRのメーカーはHiroseです、この部品の機能は「Single Slot SMT Connectors For Card-Bus Based PC Cards」です。 |
部品番号 | IC11S-BUR-PEJR |
| |
部品説明 | Single Slot SMT Connectors For Card-Bus Based PC Cards | ||
メーカ | Hirose | ||
ロゴ | |||
このページの下部にプレビューとIC11S-BUR-PEJRダウンロード(pdfファイル)リンクがあります。 Total 38 pages
Single Slot SMT Connectors For Card-Bus Based PC Cards
IC11S Series
PC Card Standard Compliant
Reduced height : 5.6mm high
sFeatures
1. PC Card Standard compliant:
• Grounding is required to meet the high speed signal
requrements of the PC card standard. Grounding reliability is
achieved with a grounding plate and 8 grounding contacts.
• Type 1, type 2 and type 3 cards are covered.
• Terminals for ground clipping are provided.
2. Space saving
Smaller size reduces occupied area on PC boards as
compared to previous products.
3. Reduced Height:
Connector height is minimized to 5.6mm, making possible
thinner product designs.
4. Eject mechanism with high-level functionality
Hirose Electric's original ejection mechanism provides an
higher degree of card ejection over existing products. This
improves the operational qualities of card removal. (Patents
pending)
5. Wide Variety of Options Available
• Standard type mounts to the top of the PC board and reverse
type mounts on the underside of the board
• Three types of eject buttons; rigid, flexible and POP-UP.All
types can be installed on the right or left side of the ejector.
• Available with standoff to utilize space under the connector for
mounting other parts.
6. Light-weight
Weight of 12.7g for normal button type helps achieve the
reduced weight required in today’s products.
Wide variety of options
(1)Board Mounting
➀Standard type
➁Reverse type
(2)Types of eject button
➀Rigid button
➁Foldering button
➂Pop-up button
(3)Position of eject buttons
➀Right
➁Left
(4)Standoffs
➀None
➁2.2mm
A2
1 Page sOrdering Information
SMT Unit
IC11S A - 68 PLR - 1.27SF - EJ R
1 2 34
5 67
1 Series name : IC11S
2 Standoff type
Blank : none
A : 2.2mm
3 Number of contacts : 68
4 Board Mounting Type:
PL : standard type
PLR : reverse type
5 1.27SF : 1.27mm pitch SMT connector
6 With ejector
EJ : with ejector
7 Eject button positions
R : right
L : left
Guide Unit
IC11S A - BUR - FEJ R
89
10
11 12
8 Series name : IC11S
9 Standoff type
Blank: none
A : 2.2mm
11 Eject button type
EJ : rigid button
FEJ : Foldering button
PEJ : POP-UP button
10 Board Mounting Type
BD : standard type
BUR : reverse type
12 Eject button positions
R : right
L : left
(Note.) IC11S Series will be used in combination of SMT unit with guide unit. When using, please select
the same type for the following items. Please note that other combinations cannot be used.
• Series name
• Standoff
• Board-installed type
• Eject button positions
(1⇔8)
(2⇔9)
( 4 ⇔ 10 )
( 7 ⇔ 12 )
A4
3Pages sStandard
Right flexible button type
SMT unit ( 1 )
No.1
GND
59
42.545
P=0.635
No.35
No.2
No.36
34.4 MAX
No.68
No.34
GND
eject metal fittings movable range C
A
3 59.5
guide unit ( 2 )
3 54.9
A
No.1
No.2
(34.55)
(42.05)
No.34
No.35
No.36
No.68
Standoff
type
➀SMT unit
Part Number
CL No.
➁Guide unit
Part Number
CL No.
none IC11S-68PL-1.27SF-EJR 640-1007-3
IC11S-BD-FEJR
640-1075-3
2.2mm IC11SA-68PL-1.27SF-EJR 640-1009-9
IC11SA-BD-FEJR
640-1077-9
Note.1) This figure illustrates grouping of SMT unit(➀) and guide unit(➁) together.
Note.2) Dimensions for card fitting are in accordance with "PC Card Standard".
Note.3) Indicated dimensions are symmetrical to the center of the card insertion slot.
A B C Weight
(mm) (mm) (mm) (g)
3 5.6 0.1 13.1
5.2 7.8 2.3 13.5
A7
6 Page | |||
ページ | 合計 : 38 ページ | ||
|
PDF ダウンロード | [ IC11S-BUR-PEJR データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
IC11S-BUR-PEJL | Single Slot SMT Connectors For Card-Bus Based PC Cards | Hirose |
IC11S-BUR-PEJR | Single Slot SMT Connectors For Card-Bus Based PC Cards | Hirose |