|
|
TDA1015のメーカーはNXP Semiconductorsです、この部品の機能は「1 to 4 W audio power amplifier」です。 |
部品番号 | TDA1015 |
| |
部品説明 | 1 to 4 W audio power amplifier | ||
メーカ | NXP Semiconductors | ||
ロゴ | |||
このページの下部にプレビューとTDA1015ダウンロード(pdfファイル)リンクがあります。 Total 13 pages
INTEGRATED CIRCUITS
DATA SHEET
TDA1015
1 to 4 W audio power amplifier
Product specification
File under Integrated Circuits, IC01
November 1982
1 Page Philips Semiconductors
1 to 4 W audio power amplifier
Product specification
TDA1015
November 1982
3
3Pages Philips Semiconductors
1 to 4 W audio power amplifier
Product specification
TDA1015
Notes
1. Measured with an ideal coupling capacitor to the speaker load.
2. Measured with a load resistor of 20 kΩ.
3. Measured at Po = 1 W; the frequency response is mainly determined by C1 and C3 for the low frequencies and by
C4 for the high frequencies.
4. Independent of load impedance of preamplifier.
5. Unweighted r.m.s. noise voltage measured at a bandwidth of 60 Hz to 15 kHz (12 dB/octave).
6. Ripple rejection measured with a source impedance between 0 and 2 kΩ (maximum ripple amplitude: 2 V).
7. The tab must be electrically floating or connected to the substrate (pin 9).
Fig.3 Test circuit.
November 1982
6
6 Page | |||
ページ | 合計 : 13 ページ | ||
|
PDF ダウンロード | [ TDA1015 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
TDA1010 | 6 W audio power amplifier in car applications 10 W audio power amplifier in mains-fed applications | NXP Semiconductors |
TDA1010A | Audio Power Output | ETC |
TDA1010A | 6 W audio power amplifier in car applications 10 W audio power amplifier in mains-fed applications | NXP Semiconductors |
TDA1011 | 2 to 6 W audio power amplifier | NXP Semiconductors |