|
|
UPD5710TK-E2-AのメーカーはNECです、この部品の機能は「NECs WIDE BAND SINGLE CONTROL CMOS SPDT SWITCH」です。 |
部品番号 | UPD5710TK-E2-A |
| |
部品説明 | NECs WIDE BAND SINGLE CONTROL CMOS SPDT SWITCH | ||
メーカ | NEC | ||
ロゴ | |||
このページの下部にプレビューとUPD5710TK-E2-Aダウンロード(pdfファイル)リンクがあります。 Total 9 pages
DATA SHEET
NEC's WIDE BAND UPD5710TK
SINGLE CONTROL CMOS SPDT SWITCH
FEATURES
• SUPPLY VOLTAGE :
1.8 to 3.3 V (2.8 V TYP.)
• SINGLE SWITCH CONTROL VOLTAGE:
Vcont (H) = 1.8 to 3.3 V (2.8 V TYP.)
Vcont (L) = −0.2 to +0.2 V (0 V TYP.)
• LOW INSERTION LOSS:
0.6 dB TYP. @ DC to 1.0 GHz
0.8 dB TYP. @ 1.0 to 2.0 GHz
0.95 dB TYP. @ 2.0 to 2.5 GHz
• HIGH ISOLATION:
32.5 dB TYP. @ DC to 1.0 GHz
25 dB TYP. @ 1.0 to 2.0 GHz
22.5 dB TYP. @ 2.0 to 2.5 GHz
• POWER HANDLING:
Pin (0.1 dB) = +17.0 dBm TYP. @ 1.0GHz, VDD = 2.8 V
Pin (1 dB) = +21.0 dBm TYP. @ 1.0 GHz, VDD = 2.8 V
• HIGH-DENSITY SURFACE MOUNT PACKAGE:
6-pin minimold package (1.5 × 1.1 × 0.55 mm)
• Pb-FREE
DESCRIPTION
NEC's UPD5710TK is a wide-band single control
CMOS MMIC SPDT (Single Pole Double Throw)
switch for mobile communications, instrumentation,
short range wireless, and general-purpose RF
switching applications.
This device can operate from DC to 2.5GHz with low
insertion loss and high isolation, and generally does
not require blocking capacitors on the RF lines.
The UPD5710TK is housed in a Pb-Free 6-pin
minimold (1511) package, suitable for high-density
surface mounting.
APPLICATIONS
• MOBILE COMMUNICATIONS
• SET TOP BOXES
• SHORT RANGE WIRELESS
• INSTRUMENTATION
ORDERING INFORMATION
PART NUMBER
μPD5710TK-E2-A
PACKAGE
6-pinlead-less minimold (1511)
MARKING
C3L
SUPPLYING FORM
• Embossed tape 8 mm wide
• Pin 1, 6 face the perforation side of the tape
• Qty 5 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order: UPD5710TK
California Eastern Laboratories
1 Page UPD5710TK
ELECTRICAL CHARACTERISTICS (TA = +25°C, VDD = 2.8V, Vcont(H) = 2.8 V , Vcont(L) = 0 V, unless otherwise specified)
PARAMETER
Insertion Loss 1
Insertion Loss 2
Insertion Loss 3
Isolation 1
Isolation 2
Isolation 3
Input Return Loss
Output Return Loss
0.1 dB Loss Compression
Input Power Note
1 dB Loss Compression
Input Power Note
Intermodulation Intercept Point
Supply Current
Switch Control Current
Switch Control Speed
SYMBOL
Lins1
Lins2
Lins3
ISL1
ISL2
ISL3
RLin
RLout
Pin (0.1 dB)
TEST CONDITIONS
f = DC to 1.0 GHz
f = 1.0 to 2.0 GHz
f = 2.0 to 2.5 GHz
f = DC to 1.0 GHz
f = 1.0 to 2.0 GHz
f = 2.0 to 2.5 GHz
f = DC to 2.5 GHz
f = DC to 2.5 GHz
f = 1.0 GHz
Pin (1 dB)
f = 1.0 GHz
IIP3 2 tone, 1.000/1.001GHz,
1 MHz spacing
IDD No RF
Icont No RF
tSW
MIN.
−
−
−
30
22
-
15
15
+13.5
TYP.
0.6
0.8
0.95
32.5
25
22.5
20
20
+17.0
MAX.
0.8
1.0
1.2
−
−
−
−
−
−
UNIT
dB
dB
dB
dB
dB
dB
dB
dB
dBm
− +21.0 −
dBm
− +33 − dBm
− 0.01 1.0 μA
- 0.01 1.0 μA
− 30 500 ns
Notes . Pin (0.1 dB) or Pin (1 dB) are the measured input power level when the insertion loss increases 0.1 dB more
or 1dB than that of linear range.
3Pages UPD5710TK
TYPICAL CHARACTERISTIC
(TA = +25°C, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V, unless otherwise specified)
Remark The graphs indicate nominal characteristics.
6 Page | |||
ページ | 合計 : 9 ページ | ||
|
PDF ダウンロード | [ UPD5710TK-E2-A データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
UPD5710TK-E2-A | NECs WIDE BAND SINGLE CONTROL CMOS SPDT SWITCH | NEC |