DataSheet.jp

UPA603 の電気的特性と機能

UPA603のメーカーはNECです、この部品の機能は「P-CHANNEL MOS FET 6-PIN 2 CIRCUITS」です。


製品の詳細 ( Datasheet PDF )

部品番号 UPA603
部品説明 P-CHANNEL MOS FET 6-PIN 2 CIRCUITS
メーカ NEC
ロゴ NEC ロゴ 




このページの下部にプレビューとUPA603ダウンロード(pdfファイル)リンクがあります。

Total 6 pages

No Preview Available !

UPA603 Datasheet, UPA603 PDF,ピン配置, 機能
DATA SHEET
MOS FIELD EFFECT TRANSISTOR
µPA603T
P-CHANNEL MOS FET (6-PIN 2 CIRCUITS)
The µPA603T is a mini-mold device provided with two
MOS FET circuits. It achieves high-density mounting and
saves mounting costs.
FEATURES
• Two MOS FET circuits in package the same size as
SC-59
• Complement to µPA602T
• Automatic mounting supported
PACKAGE DIMENSIONS (in millimeters)
0.32
+0.1
–0.05
0.16
+0.1
–0.06
0 to 0.1
0.95 0.95
1.9
2.9 ±0.2
0.8
1.1 to 1.4
PIN CONNECTION (Top view)
ABSOLUTE MAXIMUM RATINGS (TA = 25 ˚C)
PARAMETER
SYMBOL RATINGS
Drain to Source Voltage
VDSS
–50
Gate to Source Voltage
VGSS
+16
Drain Current (DC)
ID(DC)
–100
Drain Current (pulse)
ID(pulse)*
–200
Total Power Dissipation
PT 300 (Total)
Channel Temperature
Tch 150
Storage Temperature
Tstg –55 to +150
UNIT
V
V
mA
mA
mW
˚C
˚C
* PW 10 ms, Dury Cycle 50 %
Document No. G11250EJ1V0DS00 (1st edition)
Date Published June 1996 P
Printed in Japan
© 1996

1 Page





UPA603 pdf, ピン配列
TYPICAL CHARACTERISTICS (TA = 25 ˚C)
DERATING FACTOR OF FORWARD BIAS
SAFE OPERATING AREA
100
80
60
40
20
0 20 40 60 80 100 120 140 160
TC - Case Temperature - ˚C
–120
–100
DRAIN CURRENT vs.
DRAIN TO SOURCE VOLTAGE
Pulsed
–8 V
measurement
–6 V
–4 V
–80
–60
–40 VGS = –2 V
–20
0 –2 –4 –6 –8 –10 –12 –14
VDS - Drain to Source Voltage - V
–2.4
–2.2
GATE TO SOURCE CUTOFF VOLTAGE
vs. CHANNEL TEMPERATURE
VDS = –5.0 V
ID = –1 µA
–2.0
–1.8
–1.6
–1.4
–1.2
–30
0 30 60 90 120
Tch - Channel Temperature - ˚C
150
µPA603T
TOTAL POWER DISSIPATION vs.
AMBIENT TEMPERATURE
350
Free air
300
250
200
150
Per
one
Total
unit
100
50
0 25 50 75 100 125 150
TA - Ambient Temperature - ˚C
–100
TRANSFER CHARACTERISTICS
–10
–1
–0.1
–0.01
–0.001
0
TA = 150 ˚C
75 ˚C
25 ˚C
–25 ˚C
VDS = –5.0 V
Pulsed
measurement
–5 –10 –15
VGS - Gate to Source Voltage - V
FORWARD TRANSFER ADMITTANCE
vs. DRAIN CURRENT
100
VDS = –5.0 V
50
20
10 TA = –25 ˚C
25 ˚C
5
75 ˚C
150 ˚C
2
1
–1 –2
–5 –10 –20 –50 –100
ID - Drain Current mA
3


3Pages


UPA603 電子部品, 半導体
µPA603T
No part of this document may be copied or reproduced in any form or by any means without the prior written
consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this
document.
NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from use of a device described herein or any other liability arising
from use of such device. No license, either express, implied or otherwise, is granted under any patents,
copyrights or other intellectual property rights of NEC Corporation or others.
While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices,
the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or
property arising from a defect in an NEC semiconductor device, customer must incorporate sufficient safety
measures in its design, such as redundancy, fire-containment, and anti-failure features.
NEC devices are classified into the following three quality grades:
“Standard“, “Special“, and “Specific“. The Specific quality grade applies only to devices developed based on
a customer designated “quality assurance program“ for a specific application. The recommended applications
of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each
device before using it in a particular application.
Standard: Computers, office equipment, communications equipment, test and measurement equipment,
audio and visual equipment, home electronic appliances, machine tools, personal electronic
equipment and industrial robots
Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems or medical equipment for life support, etc.
The quality grade of NEC devices in “Standard“ unless otherwise specified in NEC's Data Sheets or Data Books.
If customers intend to use NEC devices for applications other than those specified for Standard quality grade,
they should contact NEC Sales Representative in advance.
Anti-radioactive design is not implemented in this product.
M4 94.11

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ UPA603 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
UPA602T

N-CHANNEL MOS FET 6-PIN 2 CIRCUITS

NEC
NEC
UPA603

P-CHANNEL MOS FET 6-PIN 2 CIRCUITS

NEC
NEC
UPA603T

P-CHANNEL MOS FET 6-PIN 2 CIRCUITS

NEC
NEC
UPA606T

N-CHANNEL MOS FET 6-PIN 2 CIRCUITS FOR SWITCHING

NEC
NEC


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap