DataSheet.jp

UPA502T の電気的特性と機能

UPA502TのメーカーはNECです、この部品の機能は「N-CHANNEL MOS FET 5-PIN 2 CIRCUITS」です。


製品の詳細 ( Datasheet PDF )

部品番号 UPA502T
部品説明 N-CHANNEL MOS FET 5-PIN 2 CIRCUITS
メーカ NEC
ロゴ NEC ロゴ 




このページの下部にプレビューとUPA502Tダウンロード(pdfファイル)リンクがあります。

Total 6 pages

No Preview Available !

UPA502T Datasheet, UPA502T PDF,ピン配置, 機能
DATA SHEET
MOS FIELD EFFECT TRANSISTOR
µPA502T
N-CHANNEL MOS FET (5-PIN 2 CIRCUITS)
The µPA502T is a mini-mold device provided with two
MOS FET circuits. It achieves high-density mounting and
saves mounting costs.
PACKAGE DIMENSIONS (in millimeters)
0.32
+0.1
–0.05
0.16+–00..016
FEATURES
• Two source common MOS FET circuits in package the
same size as SC-59
• Complement to µPA503T
• Automatic mounting supported
0.95 0.95
1.9
2.9 ±0.2
0 to 0.1
0.8
1.1 to 1.4
PIN CONNECTION (Top view)
ABSOLUTE MAXIMUM RATINGS (TA = 25 ˚C)
PARAMETER
Drain to Source Voltage
Gate to Source Voltage
Drain Current (DC)
Drain Current (pulse)
Total Power Dissipation
Channel Temperature
Storage Temperature
SYMBOL
VDSS
VGSS
ID(DC)
ID(pulse)*
PT
Tch
Tstg
RATINGS
50
±20
100
200
300 (TOTAL)
150
–55 to 150
* PW 10 ms, Duty Cycle 50 %
UNIT
V
V
mA
mA
mW
˚C
˚C
Document No. G11238EJ1V0DS00 (1st edition)
Date Published June 1996 P
Printed in Japan
1996

1 Page





UPA502T pdf, ピン配列
TYPICAL CHARACTERISTICS (TA = 25 ˚C)
DERATING FACTOR OF FORWARD BIAS
SAFE OPERATING AREA
100
80
60
40
20
0 20 40 60 80 100 120 140 160
TC - Case Temperature - ˚C
DRAIN CURRENT vs. DRAIN TO
SOURCE VOLTAGE
120
Pulsed
measurement
100
4.0 V
3.5 V
80
60
3.0 V
40
20 VGS = 2.5 V
0 1234567
VDS - Drain to Source Voltage - V
GATE TO SOURCE CUT-OFF VOLTAGE
vs. CHANNEL TEMPERATURE
3
VDS = 5 V
ID = 1.0 µA
2
1
–30 0 30 60 90 120 150
Tch - Channel Temperature - ˚C
µPA502T
350
300
250
200
150
100
50
0
1000
100
TOTAL POWER DISSIPATION vs.
AMBIENT TEMPERATURE
Free air
Per
TOTAL
one unit
25 50 75 100 125
TA - Ambient Temperature - ˚C
150
TRANSFER CHARACTERISTICS
VDS = 5 V
Pulsed
measurement
10
1
0.1
0
TA = 75 ˚C
25 ˚C
–25 ˚C
24
6
VGS - Gate to Source Voltage - V
8
FORWARD TRANSFER ADMITTANCE
vs. DRAIN CURRENT
100
VDS = 5 V
TA = 75 ˚C
25 ˚C
10 –25 ˚C
1
1 10 100 1000
ID - Drain Current - mA
3


3Pages


UPA502T 電子部品, 半導体
µPA502T
No part of this document may be copied or reproduced in any form or by any means without the prior written
consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this
document.
NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from use of a device described herein or any other liability arising
from use of such device. No license, either express, implied or otherwise, is granted under any patents,
copyrights or other intellectual property rights of NEC Corporation or others.
While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices,
the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or
property arising from a defect in an NEC semiconductor device, customer must incorporate sufficient safety
measures in its design, such as redundancy, fire-containment, and anti-failure features.
NEC devices are classified into the following three quality grades:
“Standard“, “Special“, and “Specific“. The Specific quality grade applies only to devices developed based on
a customer designated “quality assurance program“ for a specific application. The recommended applications
of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each
device before using it in a particular application.
Standard: Computers, office equipment, communications equipment, test and measurement equipment,
audio and visual equipment, home electronic appliances, machine tools, personal electronic
equipment and industrial robots
Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems or medical equipment for life support, etc.
The quality grade of NEC devices in “Standard“ unless otherwise specified in NEC's Data Sheets or Data Books.
If customers intend to use NEC devices for applications other than those specified for Standard quality grade,
they should contact NEC Sales Representative in advance.
Anti-radioactive design is not implemented in this product.
M4 94.11

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ UPA502T データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
UPA502T

N-CHANNEL MOS FET 5-PIN 2 CIRCUITS

NEC
NEC


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap