DataSheet.jp

Q2004L31V の電気的特性と機能

Q2004L31VのメーカーはTeccor Electronicsです、この部品の機能は「Thyristor Product Catalog」です。


製品の詳細 ( Datasheet PDF )

部品番号 Q2004L31V
部品説明 Thyristor Product Catalog
メーカ Teccor Electronics
ロゴ Teccor Electronics ロゴ 




このページの下部にプレビューとQ2004L31Vダウンロード(pdfファイル)リンクがあります。
Total 70 pages

No Preview Available !

Q2004L31V Datasheet, Q2004L31V PDF,ピン配置, 機能
Thyristor
Product
Catalog
Teccor Electronics
1800 Hurd Drive
Irving, Texas 75038
United States of America
Phone: +1 972-580-7777
Fax: +1 972-550-1309
Website: http://www.teccor.com
©2002 Teccor Electronics
Thyristor Product Catalog
i
http://www.teccor.com
+1 972-580-7777

1 Page





Q2004L31V pdf, ピン配列
©2002 Teccor Electronics
Thyristor Product Catalog
Contents
Product Selection Guide
Product Descriptions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - vi
Circuit Requirement Diagram - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - vii
Product Packages - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - viii
Description of Part Numbers- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - x
Quality and Reliability Assurance - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - xii
Standard Terms and Conditions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - xiv
Data Sheets
V-I Characteristics of Thyristor Devices - - - - - - - - - - - - - - - - - - - - - - - - E0-2
Electrical Parameter Terminology - - - - - - - - - - - - - - - - - - - - - - - - - - - - E0-3
Electrical Specifications
Sensitive Triacs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E1
Triacs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E2
QUADRACs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E3
Alternistor Triacs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E4
Sensitive SCRs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E5
SCRs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E6
Rectifiers - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E7
Diacs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E8
SIDAC - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E9
Mechanical Specifications
Package Dimensions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - M1
Lead Form Dimensions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - M2
Packing Options - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - M3
Application Notes
Fundamental Characteristics of Thyristors - - - - - - - - - - - - - - - - - - - AN1001
Gating, Latching, and Holding of SCRs and Triacs - - - - - - - - - - - - - AN1002
Phase Control Using Thyristors- - - - - - - - - - - - - - - - - - - - - - - - - - - AN1003
Mounting and Handling of Semiconductor Devices - - - - - - - - - - - - - AN1004
Surface Mount Soldering Recommendations - - - - - - - - - - - - - - - - - AN1005
Testing Teccor Semiconductor Devices
Using Curve Tracers - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - AN1006
Thyristors Used As AC Static Switches and Relays - - - - - - - - - - - - AN1007
Explanation of Maximum Ratings and Characteristics for Thyristors - AN1008
Miscellaneous Design Tips and Facts - - - - - - - - - - - - - - - - - - - - - - AN1009
Thyristors for Ignition of Fluorescent Lamps - - - - - - - - - - - - - - - - - - AN1010
Appendix
Cross Reference Guide - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - A1
Part Numbers Index- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - A27
iii http://www.teccor.com
+1 972-580-7777


3Pages


Q2004L31V 電子部品, 半導体
Product Descriptions
Thyristors
Sensitive SCRs
A thyristor is any semiconductor switch with a bi-stable action
depending on p-n-p-n regenerative feedback. Thyristors are nor-
mally two- or three-terminal devices for either unidirectional or bi-
directional circuit configurations. Thyristors can have many forms,
but they have certain commonalities. All thyristors are solid state
switches that are normally open circuits (very high impedance),
capable of withstanding rated blocking/off-state voltage until trig-
gered to on state. When triggered to on state, thyristors become a
low-impedance current path until principle current either stops or
drops below a minimum holding level. After a thyristor is triggered
to on-state condition, the trigger current can be removed without
turning off the device. Thyristors are used to control the flow of
electrical currents in applications including:
• Home appliances (lighting, heating, temperature control, alarm
activation, fan speed)
• Electrical tools (for controlled actions such as motor speed, sta-
pling event, battery charging)
• Outdoor equipment (water sprinklers, gas engine ignition, elec-
tronic displays, area lighting, sports equipment, physical fitness)
Sensitive Triacs
Teccor's sensitive gate triacs are AC bidirectional silicon
switches that provide guaranteed gate trigger current levels in
Quadrants I, II, III, and IV. Interfacing to microprocessors or other
equipment with single polarity gate triggering is made possible with
sensitive gate triacs. Gate triggering currents of 3 mA, 5 mA,
10 mA, or 20 mA may be specified.
Teccor's sensitive gate SCRs are silicon-controlled rectifiers repre-
senting the best in design, performance, and packaging techniques
for low- and medium-current applications.
Anode currents of 0.8 A to 10 A rms can be controlled by sensitive
gate SCRs with gate drive currents ranging from 12 µA to 500 µA.
Sensitive gate SCRs are ideally suited for interfacing to integrated
circuits or in applications where high current load requirements and
limited gate drive current capabilities exist. Examples include igni-
tion circuits, motor controls, and DC latching for alarms in smoke
detectors. Sensitive gate SCRs are available in voltage ratings to
600 V ac.
SCRs
Teccor's SCR products are half-wave, silicon-controlled rectifiers
that represent the state of the art in design and performance.
Load current capabilities range from 1 A to 70 A rms, and voltages
from 200 V to 1000 V may be specified to meet a variety of appli-
cation needs.
Because of its unidirectional switching capability, the SCR is used
in circuits where high surge currents or latching action is required.
It may also be used for half-wave-type circuits where gate-con-
trolled rectification action is required. Applications include crow-
bars in power supplies, camera flash units, smoke alarms, motor
controls, battery chargers, and engine ignition.
Surge current ratings are available from 30 A in the TO-92 packag-
ing to 950 A in the TO-218X package.
Sensitive gate triacs are capable of controlling AC load currents
from 0.8 A to 8 A rms and can withstand operating voltages from
200 V to 600 V.
Triacs
Teccor's triac products are bidirectional AC switches, capable of
controlling loads from 0.8 A to 35 A rms with 10 mA, 25 mA, and
50 mA IGT in operating Quadrants I, II and III.
Triacs are useful in full-wave AC applications to control AC power
either through full-cycle switching or phase control of current to the
load element. These triacs are rated to block voltage in the “OFF”
condition from 200 V minimum with selected products capable of
1000 V operation. Typical applications include motor speed con-
trols, heater controls, and incandescent light controls.
Quadrac
Quadrac devices, originally developed by Teccor, are triacs and
alternistor triacs with a diac trigger mounted inside the same pack-
age. These devices save the user the expense and assembly time
of buying a discrete diac and assembling in conjunction with a
gated triac.
Rectifiers
Teccor manufactures 15 A to 25 A rms rectifiers with voltages
rated from 200 V to 1000 V. Due to the electrically isolated TO-220
package, these rectifiers may be used in common anode or com-
mon cathode circuits using only one part type, thereby simplifying
stock requirements.
Diacs
Diacs are trigger devices used in phase control circuits to provide
gate pulses to a triac or SCR. They are voltage-triggered bidirec-
tional silicon devices housed in DO-35 glass axial lead packages
and DO-214 surface mount packages.
Diac voltage selections from 27 V to 45 V provide trigger pulses
closely matched in symmetry at the positive and negative break-
over points to minimize DC component in the load circuit.
Some applications include gate triggers for light controls, dimmers,
power pulse circuits, voltage references in AC power circuits, and
triac triggers in motor speed controls.
Sidacs
The Quadrac is offered in capacities from 4 A to 15 A rms and volt-
ages from 200 V ac to 600 V ac.
Alternistor Triacs
Sidacs represent a unique set of thyristor qualities. The sidac is a
bidirectional voltage triggered switch. Some characteristics of this
device include a normal 95 V to 330 V switching point, negative
resistance range, latching characteristics at turn-on, and a low on-
state voltage drop.
The Teccor alternistor is specifically designed for applications
required to switch highly inductive loads. The design of this special
chip effectively offers the same performance as two thyristors
(SCRs) wired inverse parallel (back-to-back).
This new chip construction provides the equivalent of two electri-
cally-separate SCR structures, providing enhanced dv/dt charac-
teristics while retaining the advantages of a single-chip device.
One-cycle surge current capability up to 20 A makes the sidac an
ideal product for dumping charged capacitors through an inductor
in order to generate high-voltage pulses. Applications include light
controls, high-pressure sodium lamp starters, power oscillators,
and high-voltage power supplies.
Teccor manufactures 6 A to 40 A alternistors with blocking voltage
rating from 200 V to 1000 V. Alternistors are offered in TO-220,
TO-218, and TO-218X packages with isolated and non-isolated
versions.
http://www.teccor.com
+1 972-580-7777
P-2
©2002 Teccor Electronics
Thyristor Product Catalog(972) 580-7777

6 Page



ページ 合計 : 70 ページ
 
PDF
ダウンロード
[ Q2004L31V データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
Q2004L31V

Thyristor Product Catalog

Teccor Electronics
Teccor Electronics


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap