DataSheet.jp

U.FL-LP-N-2 の電気的特性と機能

U.FL-LP-N-2のメーカーはHirose Electricです、この部品の機能は「Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height」です。


製品の詳細 ( Datasheet PDF )

部品番号 U.FL-LP-N-2
部品説明 Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
メーカ Hirose Electric
ロゴ Hirose Electric ロゴ 




このページの下部にプレビューとU.FL-LP-N-2ダウンロード(pdfファイル)リンクがあります。

Total 8 pages

No Preview Available !

U.FL-LP-N-2 Datasheet, U.FL-LP-N-2 PDF,ピン配置, 機能
Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
U.FL Series
Meets up to 6 GHz Requirement
Mated Height Comparison
(With Hirose Product)
U.FL-LP(V)-040
U.FL-LP-040
U.FL-LP-066
E.FL-LP-040
E.FL-LP-066
U.FL Series
E.FL Series
sFeatures
1. Low Profile: 1.9mm or 2.4mm Nom. Mated Height
Height from the circuit board is 2.0mm or 2.5mm maximum
when a plug (right angle) is mated to a receptacle, which ranks
with world’s smallest class.
2.Extremely Small Occupied Mounting Area
In comparison with our SMT coaxial connectors E.FL series, the
receptacle provides a reduction of approximately 18% of
occupied mounting surface, which is only 7.7mm2.
3.Light Weight
One of the world’s lightest coaxial connectors.
Receptacle: 15.7mg
4.Applicable Up to 6 GHz Frequency
To meet the frequency requirements of a wide variety of
miniature equipment, these connectors offer high frequency
performance from DC to 6 GHz.
5.Board placement with automatic equipment
Supplied on tape-and-reel packaging.
6.Use of Ultra-fine Teflon Cable
From among the types of applicable cable, dia. 0.81mm(single
shielded) ultra-fine Teflon coaxial cable has been made a
standard specification in construction area.
Refer to the following pages for different cable types.
7.Simple Removal of Connector
The extraction jig permits simple removal of connectors.
8.User Friendly Mating Operation
Tactile lock feeling ensures engagement even with this small
size.
qSpace Factor of Mated Connector
U.FL-LP-040
U.FL-R-SMT
U.FL-LP-066
NEW
NEW
U.FL-R-SMT
U.FL-LP(V)-040
U.FL-R-SMT
U.FL-LP-062
U.FL-R-SMT
sApplications
Mobile phones, Wireless LAN, Mini-PCI, Bluetooth, PDA, GPS,
electronic measuring instruments, etc.
NEW
U.FL-LP-088
U.FL-R-SMT
2003.9
1

1 Page





U.FL-LP-N-2 pdf, ピン配列
sCable Assembly (Plug)
U.FL-LP-040
U.FL-LP-066
U.FL-LP(V)-040
U.FL-LP-062
U.FL-LP-088
Part No.
4
4 3.4 4
5
Mated Height
2.5mm Max.
(2.4mm Nom.)
2.5mm Max.
(2.4mm Nom.)
2.0mm Max.
(1.9mm Nom.)
2.4mm Max.
(2.3mm Nom.)
2.4mm Max.
(2.3mm Nom.)
Applicable
cable
Dia. 0.81mm
Coaxial cable
Dia. 1.13mm and
Dia. 1.32mm
Coaxial cable
Dia. 0.81mm
Coaxial cable
Dia. 1mm
Coaxial cable
Dia. 1.37mm
Coaxial cable
Weight (mg)
53.7
59.1
34.8
45.5
71.7
qCable Guide
Description CableDia. 0.8I1nmnemr
TypeCoaxCiaolncdaubcletor*
Cable Specification
DielDeciat.ri0c.81mm Outer
DiaCmoeatxeiral cableConductor*
Jacket
Diameter
NomDiniaa.l 1mm
Nominal Datiate. n1u.3a7tmiomn
ImpeCdoaanxciael cable At 3GHz CoaxiaAl tca6bGleHz
Dia.0.81mm
04
Coaxial Cable
7/0.05 SA
(AWG36)
Dia.0.40
PFA
Single
Shield SA
Dia.0.81
PFA
50 ohms
6.45dB/m
9.42dB/m
Dia.1.13mm
068
Coaxial Cable
7/0.08 SA
(AWG32)
Dia.0.68
FEP
Single
Shield SA[TA]
Dia.1.13
FEP
50 ohms
3.43dB/m
[3.73dB/m]
5.13dB/m
[5.44dB/m]
Dia.1.32mm
066
Coaxial Cable
7/0.08 SA
(AWG32)
Dia.0.66
FEP
Double
Shield TA
Dia.1.32
FEP
50 ohms
3.8dB/m
5.6dB/m
Dia.1mm
062
Coaxial Cable
7/0.071 SA
(AWG33)
Dia.0.62
FEP
Tape, single
Shield TAT
Dia.1
FEP
50 ohms
3.1dB/m
4.4dB/m
Dia.1.37mm
088
Coaxial Cable
7/0.102 SA
(AWG30)
Dia.0.88
FEP
Single
Shield TA
Dia.1.37
FEP
50 ohms
2.8dB/m
4.3dB/m
(data as provided by material suppliers, for reference only)
* SA : Silver plated annealed copper wire, TA : Tin plated annealed copper wire, TAT : Tin plated copper wire alloyed with tin
sHow to Specify Cable Assembled Plug
Dimension of U.FL Series assembly products should be made as indicated below.
Double-Ended Cable Assembly
L
Single-Ended Cable Assembly
L
qOrdering Information
qTotal Standard Tolerance for Total Length of Cable Assembly
U.FL - [] LP - [] - A - (L)
1 23
4
1 Series name
2 Assembly type
3 Cable type
4 Total Length(mm)
U.FL
LP: Single ended
2LP: Double ended
04 : Dia.0.81mm Coaxial Cable
068 : Dia.1.13mm Coaxial Cable
066 : Dia.1.32mm Coaxial Cable
062 : Dia.1 mm Coaxial Cable
088 : Dia.1.37mm Coaxial Cable
Length is expressed in mm units.
Total Length(mm)
00350<=L<=00200
02000<L<=00500
05000<L<=01000
10000<0L<=1000
Standard Tolerance (mm)
±04
±08
±12
±1.5%
Note: Shortest length L is 35 mm.
Please contact Hirose Sales Representative for cable length and cable end treatment.
3


3Pages


U.FL-LP-N-2 電子部品, 半導体
sUsage Precautions
1. Plugs
(1) Connection/
disconnection of
connectors
1) To disconnect connectors, hook the end portion of U.FL-LP-N-2 and U.FL-LP(V)-N-2 onto the connector cover and
pull off vertically in the direction of the connector mating axis.
1) To remove the connector directly, hold the connector cover and pull off
Extraction Jig
vertically in the direction of the connector mating axis.
(Please exercise caution so as not to injure fingertips or nails.)
2) To mate the connectors, the mating axes of both connectors are aligned
U.FL Cable
Assembly
and the connectors are inserted as perpendicularly as possible.
Do not attempt to insert on an extreme angle.
U.FL-R-SMT
After the connectors are mating, do not apply a load to the cable in excess of the values indicated in the diagram
below.
(2) Permissible load on
the cable after
connector mating.
U.FL-LP-040
U.FL-R-SMT
2N max.
4N max.
2N max.
(3) Precautions
Do NOT forcefully twist or deform wires.
2. Receptacles
(1) Recommended
temperature profile
(Reference)
Heating peak
( ) 240 3 seconds
260
240
220
200
180
Preheating 183
160 (130 to 165 )
140
120 40 to 50
100 Within 2 minutes seconds
80
Time
(2) Recommended
manual soldering
(Reference)
1) The temperature profile indicates the board surface temperature at the point of contacts with the connector
terminals (for surface mounted receptacle).
2) The temperature profile will change depending on conditions which include such factors as the size of the board,
the solder used, and the solder thickness.
Manual soldering: 350˚C for 5 seconds
(3) Recommended screen
thickness
0.1 to 0.15 mm
6

6 Page



ページ 合計 : 8 ページ
 
PDF
ダウンロード
[ U.FL-LP-N-2 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
U.FL-LP-N-2

Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height

Hirose Electric
Hirose Electric


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap