DataSheet.jp

USB0815 の電気的特性と機能

USB0815のメーカーはMicrosemi Corporationです、この部品の機能は「TVSarray Series」です。


製品の詳細 ( Datasheet PDF )

部品番号 USB0815
部品説明 TVSarray Series
メーカ Microsemi Corporation
ロゴ Microsemi Corporation ロゴ 




このページの下部にプレビューとUSB0815ダウンロード(pdfファイル)リンクがあります。
Total 2 pages

No Preview Available !

USB0815 Datasheet, USB0815 PDF,ピン配置, 機能
8700 E. Thomas Road
Scottsdale, AZ 85252
Tel: (480) 941-6300
Fax: (480) 947-1503
USB0803
thru
USB0824
DESCRIPTION (500 watt)
This TRANSIENT VOLTAGE SUPPRESSOR (TVS) array is packaged
in an SO-8 configuration giving protection to 2 Unidirectional data or
interface lines. It is designed for use in applications where protection
is required at the board level from voltage transients caused by
electrostatic discharge (ESD) as defined in IEC 1000-4-2, electrical
fast transients (EFT) per IEC 1000-4-4 and effects of secondary
lighting.
TVSarraySeries
These TVS arrays have a peak power rating of 500 watts for an
8/20µsec pulse. This array is suitable for protection of sensitive circuitry consisting of TTL, CMOS
DRAM’s, SRAM’s, HCMOS, HSIC microprocessors, UNIVERSAL SERIAL BUS (USB) and I/O transceivers.
The USB08XX product provides board level protection from static electricity and other induced voltage
surges that can damage or upset sensitive circuitry.
FEATURES
Protects up to 2 unidirectional lines
Surge protection Per IEC 1000-4-2, IEC 1000-4-4
Provides electrically isolated protection
SO-8 Packaging
ULTRA LOW CAPACITANCE 3 pF per line pair
ULTRA LOW LEAKAGE
MECHANICAL
Molded SO-8 Surface Mount
Weight: 0.066 grams (approximate)
Marking: Logo, device number, date code
Pin #1 defined by DOT on top of package
MAXIMUM RATINGS
Operating Temperatures: -550C to +1500C
Storage Temperature: -550C to +1500C
Peak Pulse Power: 500 Watts (8/20 µsec, Figure 1)
Pulse Repetition Rate: <.01%
PACKAGING
Tape & Reel EIA Standard 481-1-A
13 inch reel 2,500, pieces (OPTIONAL)
Carrier tubes 95 pcs per (STANDARD)
ELECTRICAL CHARACTERISTICS PER LINE @ 250C Unless otherwise specified
PART
NUMBER
USB0803
USB0805
USB0812
USB0815
USB0824
DEVICE
MARKING
STAND
OFF
VOLTAGE
VWM
VOLTS
MAX
3.3
5.0
12.0
15.0
24.0
BREAKDOWN
VOLTAGE
VBR
@1 mA
VOLTS
MIN
4
6.0
13.3
16.7
26.7
CLAMPING
VOLTAGE
VC
@ 1 Amp
(FIGURE 2)
VOLTS
MAX
8
10.8
19
25
44
CLAMPING
VOLTAGE
VC
@ 5 Amp
(FIGURE 2)
VOLTS
MAX
11
13
26
32
57
LEAKAGE
CURRENT
ID
@ VWM
µA
MAX
200
20
1
1
1
CAPACITANCE
(f=1 MHz)
@0V
C
pF
TYP
5
5
5
5
5
TEMPERATURE
COEFFICIENT
OF VBR
áVBR
mV/°C
MAX
-5
1
8
11
28
NOTE: TVS product is normally selected based on its stand off Voltage VWM. Product selected voltage should be
equal to or greater than the continuous peak operating voltage of the circuit to be protected.
Application: The USB08XX product is designed for transient voltage suppression protection of ESD sensitive
components at the board level. It is an ideal product to be used for protection of I/O Transceivers.
MSC1537.PDF
ISO 9001 CERTIFIED
REV B 7/07/2000

1 Page







ページ 合計 : 2 ページ
 
PDF
ダウンロード
[ USB0815 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
USB0812

TVSarray Series

Microsemi Corporation
Microsemi Corporation
USB0812

TVS Diode (Transient Voltage Suppressor)

Micro Commercial Components
Micro Commercial Components
USB0812C

TVSarray Series

Microsemi Corporation
Microsemi Corporation
USB0812C

TVS Diode (Transient Voltage Suppressor)

Micro Commercial Components
Micro Commercial Components


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap