|
|
Número de pieza | UPG174TA | |
Descripción | L-BAND PA DRIVER AMPLIFIER | |
Fabricantes | NEC | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de UPG174TA (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
No Preview Available ! DATA SHEET
GaAs INTEGRATED CIRCUIT
µPG174TA
L-BAND PA DRIVER AMPLIFIER
DESCRIPTION
The µPG174TA is L-Band PA driver amplifier developed for digital cellular telephone and PCS applications. This
device feature high output power and low distortion with 2.8 V low voltage and 35 mA low current operation. It is
housed in a very small 6-pin minimold package available on tape-and-reel and easy to install and contributes to
miniaturizing the systems.
FEATURES
y Low operation voltage : VDD = 2.8 V
y Low distortion
: Padj1 = –60 dBc TYP. @ VDD = 2.8 V, fRF = 1 429 to 1 453 MHz, Pout = +10 dBm
Off-chip input and output matching
y Low operation current : IDD = 35 mA TYP. @ VDD = 2.8 V, fRF = 1 429 to 1 453 MHz, Pout = +10 dBm
Off-chip input and output matching
y 6-pin minimold package
APPLICATION
y Digital Cellular: PDC1.5G, DCS1800, PCS, etc.
ORDERING INFORMATION
Part Number
µPG174TA-E3
Package
6-pin minimold
Supplying Form
Carrier tape width is 8 mm.
Qty 3kp/reel.
Remark To order evaluation samples, please contact your local NEC sales office. (Part number for sample order:
µPG174TA)
ABSOLUTE MAXIMUM RATINGS (TA = +25°C)
Parameters
Supply Voltage
Input Power
Total Power Dissipation
Operating Ambient Temperature
Storage Temperature
Symbol
VDD
Pin
Ptot
TA
Tstg
Ratings
6.0
–10
170Note
–30 to +90
–35 to +150
Unit
V
dBm
mW
°C
°C
Note Mounted on a 50 × 50 × 1.6 mm double copper clad epoxy glass PWB, TA = +85°C
Caution The IC must be handled with care to prevent static discharge because its circuit composed of
GaAs HJ-FET.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. P13230EJ2V0DS00 (2nd edition)
Date Published January 2000 N CP(K)
Printed in Japan
The mark shows major revised points.
©
1998, 2000
1 page µPG174TA
TYPICAL CHARACTERISTICS
OUTPUT POWER AND ADJACENT CHANNEL POWER LEAKAGE vs. INPUT POWER
@VDD = +2.8 V, f = 1 450 MHz
20 −20
Pout
15 −30
10
Padj1
−40
5 −50
Padj2
0 −60
−70
−80
−35 −30 −25 −20 −15
Input Power Pin (dBm)
Data Sheet P13230EJ2V0DS00
5
5 Page [MEMO]
µPG174TA
Data Sheet P13230EJ2V0DS00
11
11 Page |
Páginas | Total 12 Páginas | |
PDF Descargar | [ Datasheet UPG174TA.PDF ] |
Número de pieza | Descripción | Fabricantes |
UPG174TA | L-BAND PA DRIVER AMPLIFIER | NEC |
UPG174TA-E3 | L-BAND PA DRIVER AMPLIFIER | NEC |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |