DataSheet.jp

UPG154TB の電気的特性と機能

UPG154TBのメーカーはNECです、この部品の機能は「L-BAND SPDT SWITCH」です。


製品の詳細 ( Datasheet PDF )

部品番号 UPG154TB
部品説明 L-BAND SPDT SWITCH
メーカ NEC
ロゴ NEC ロゴ 




このページの下部にプレビューとUPG154TBダウンロード(pdfファイル)リンクがあります。

Total 16 pages

No Preview Available !

UPG154TB Datasheet, UPG154TB PDF,ピン配置, 機能
DATA SHEET
GaAs INTEGRATED CIRCUIT
µPG154TB
L-BAND SPDT SWITCH
DESCRIPTION
The µPG154TB is an L-band SPDT (Single Pole Double Throw) GaAs FET switch which was developed for digital
cellular or cordless telephone application. The device can operate from 100 MHz to 2.5 GHz, having the low
insertion loss. It housed in an original 6-pin super minimold package that is smaller than usual 6-pin minimold easy
to install and contributes to miniaturizing the system.
FEATURES
• Low Insertion Loss : LINS = 0.65 dB TYP. @VCONT = +3.0 V/0 V, VDD = +3.0 V, CX = 2.0 pF, f = 2 GHz
• High Power Switching : Pin (1 dB) = +30 dBm TYP. @VCONT = +3.0 V/0 V, VDD = +3.0 V, CX = 2.0 pF, f = 2 GHz
• Small 6-pin super minimold package (Size: 2.0 × 1.25 × 0.9 mm)
APPLICATIONS
• L, S-band digital cellular or cordless telephone
• PCS, WLAN and WLL applications
ORDERING INFORMATION
Part Number
µPG154TB-E3
Marking
G1K
Package
6-pin super minimold
Supplying Form
Embossed tape 8 mm wide.
Pin 1, 2, 3 face to tape perforation side.
Qty 3 kp/reel.
Remark To order evaluation samples, please contact your local NEC sales office. (Part number for sample
order: µPG154TB)
Caution The IC must be handled with care to prevent static discharge because its circuit is composed of
GaAs MES FET.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. P13656EJ2V0DS00 (2nd edition)
Date Published September 1999 N CP(K)
Printed in Japan
The mark shows major revised points.
©
1998, 1999

1 Page





UPG154TB pdf, ピン配列
µPG154TB
ELECTRICAL CHARACTERISTICS
(Unless otherwise specified, TA = +25°C, VCONT1 = 3 V, VCONT2 = 0 V or VCONT1 = 0 V, VCONT2 = 3 V, ZO = 50 ,
VDD = 3.0 V, Off chip DC blocking capacitors value; 51 pF)
Parameter
Insertion Loss
Isolation
Input Return Loss
Output Return Loss
Input Power at 0.1 dB
Compression PointNote
Input Power at 1 dB
Compression PointNote
Switching Speed
Control Current
Symbol
LINS
ISL
RLin
RLout
Pin (0.1 dB)
Test Conditions
f = 100 M to 1.0 GHz,
CX = 12.0 pF
f = 2.0 GHz, CX = 2.0 pF
f = 1.0 GHz, CX = 12.0 pF
f = 1.5 GHz, CX = 4.5 pF
f = 2.0 GHz, CX = 2.0 pF
f = 100 M to 2.0 GHz,
CX = 2.0 pF
f = 100 M to 2.0 GHz,
CX = 2.0 pF
f = 2.0 GHz, CX = 2.0 pF
Pin (1 dB)
f = 2.0 GHz, CX = 2.0 pF
tsw
ICONT
VCONT = 3 V/0 V
MIN.
20
18
11
11
27
TYP.
0.30
0.65
24
22
21
15
15
26.5
30
30
2
MAX.
0.65
0.90
10
Unit
dB
dB
dB
dB
dBm
dBm
ns
µA
Note Pin (1 dB) and Pin (0.1 dB) are measured the input power level when the insertion loss increase more 1 dB or 0.1
dB than that of linear range. All other characteristics are measured in linear range.
Cautions
1. The value of trap capacitor to improve the isolation performance should be chosen to
accommodate the operating frequency, band width, switching speed and the condition with
actual board of your system. The distance between IC’s No.2 pin and trap capacitor CX
should be placed as shorter as possible to avoid parasitic parameters.
2. When the µPG154TB is used, it is necessary to use DC blocking capacitors for No.1 (OUT1),
No.3 (OUT2) and No.5 (IN). The value of DC blocking capacitors should be chosen to
accommodate the operating frequency, band width, switching speed and the condition with
actual board of your system. The range of recommended DC blocking capacitor value is
less than 100 pF.
Data Sheet P13656EJ2V0DS00
3


3Pages


UPG154TB 電子部品, 半導体
µPG154TB
TYPICAL CHARACTERISTICS (Cx = 2 pF)
TEST CONDITIONS: VCONT = 3 V/0 V, VDD = 3.0 V, Pin = 0 dBm, TA = +25°C, using evaluation board.
OUT1
IN
OUT2
50
IN-OUT1 INPUT RETURN LOSS vs. FREQUENCY
CH1 S11 log MAG
MARKER 3
2 GHz
0
–10 1
–20
10 dB/REF 0 dB
1: –16.635 dB
1 GHz
2: –20.537 dB
1.5 GHz
3: –16.53 dB
2 GHz
4: –10.019 dB
2.5 GHz
4
3
2
–30
–40
START 0.300 000 000 GHz STOP 3.300 000 000 GHz
Frequency f (GHz)
IN-OUT1 ISOLATION vs. FREQUENCY
CH1 S12 log MAG
MARKER 3
2 GHz
0
1
–10
–20
10 dB/REF 0 dB
1: –12.2 dB
1 GHz
2: –13.778 dB
1.5 GHz
3: –20.075 dB
2 GHz
4: –11.954 dB
2.5 GHz
24
3
–30
–40
START 0.300 000 000 GHz STOP 3.300 000 000 GHz
Frequency f (GHz)
IN-OUT1 INSERTION LOSS vs. FREQUENCY
CH1 S21 log MAG
MARKER 3
2 GHz
0
1
–1
–2
1 dB/REF 0 dB
1: –0.980 dB
1 GHz
2: –0.927 dB
1.5 GHz
3: –0.952 dB
2 GHz
4: –1.972 dB
2.5 GHz
23
4
–3
–4
START 0.300 000 000 GHz STOP 3.300 000 000 GHz
Frequency f (GHz)
IN-OUT1 OUTPUT RETURN LOSS vs. FREQUENCY
CH1 S22 log MAG
MARKER 3
2 GHz
0
–10 1
–20
10 dB/REF 0 dB
1: –16.683 dB
1 GHz
2: –21.59 dB
1.5 GHz
3: –17.13 dB
2 GHz
4: –9.277 dB
2.5 GHz
4
3
2
–30
–40
START 0.300 000 000 GHz STOP 3.300 000 000 GHz
Frequency f (GHz)
Caution This data is including loss of the test fixture.
6 Data Sheet P13656EJ2V0DS00

6 Page



ページ 合計 : 16 ページ
 
PDF
ダウンロード
[ UPG154TB データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
UPG154TB

L-BAND SPDT SWITCH

NEC
NEC
UPG154TB-E3

L-BAND SPDT SWITCH

NEC
NEC


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap