|
|
Número de pieza | UPG132G | |
Descripción | L-BAND SPDT SWITCH | |
Fabricantes | NEC | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de UPG132G (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
No Preview Available ! DATA SHEET
GaAs INTEGRATED CIRCUIT
µPG132G
L-BAND SPDT SWITCH
DESCRIPTION
µPG132G is an L-Band SPDT (Single Pole Double Throw) GaAs FET switch which was developed for digital cellular
or cordless telephone application.
The device can operate from 100 MHz to 2.5 GHz, having the low insertion loss.
It housed in an original 8 pin SSOP that is smaller than usual 8 pin SOP and easy to install and contributes to
miniaturizing the system.
It can be used in wide-band switching applications.
FEATURES
• Maximum transmission power :
• Low insertion loss
:
• High switching speed
:
• +3 V/0 V control voltage
• Small package
:
0.6 W (typ.)
0.6 dB (typ.) at f = 2 GHz
30 ns
8 pins SSOP
APPLICATION
• Digital cordless telephone : PHS, PCS, DECT etc.
• Digital hand-held cellular phone, WLAN
ORDERING INFORMATION
PART NUMBER
µPG132G-E1
PACKAGE
8 pin plastic SSOP
PACKING FORM
Carrier tape width 12 mm.
QTY 2kp/Reel.
For evaluation sample order, please contact your local NEC sales office.
ABSOLUTE MAXIMUM RATINGS (TA = 25 ˚C)
Control Voltage
VCONT
–0.6 to +6
Input Power
Pin 31
Total Power Dissipation
Ptot
0.4
Operating Case Temperature
Topt
–65 to +90
Storage Temperature
Tstg –65 to +150
V
dBm
W
˚C
˚C
CAUTION: The IC must be handled with care to prevent static discharge because its circuit is composed
of GaAs MES FET.
Document No. P10732EJ2V0DS00 (2nd edition)
Date Published April 1996 P
Printed in Japan
© 1996
1 page IN-OUT2 INSERTION LOSS vs. FREQUENCY
+ 2.0
+ 1.0
VCONT1 = +3 V
VCONT2 = 0 V
Pin = 0 dBm
0
– 1.0
– 2.0
– 3.0
100 M 200 M
500 M 1 G 2 G 3 G
f - Frequency - Hz
OUT1
50 Ω
IN
LINS
OUT2
IN-OUT2 INPUT RETURN LOSS vs. FREQUENCY
+ 10
0
VCONT1 = +3 V
VCONT2 = 0 V
Pin = 0 dBm
–10
– 20
– 30
– 40
100 M 200 M
500 M 1 G 2 G 3 G
f - Frequency - Hz
RLin
OUT1
50 Ω
IN
OUT2
µPG132G
IN-OUT2 ISOLATION vs. FREQUENCY
0
– 10
VCONT1 = 0 V
VCONT2 = +3 V
Pin = 0 dBm
– 20
– 30
– 40
– 50
100 M 200 M
500 M 1 G 2 G 3 G
f - Frequency - Hz
OUT1
50 Ω
IN
ISL
OUT2
IN-OUT2 OUTPUT RETURN LOSS vs. FREQUENCY
+ 10
0
VCONT1 = +3 V
VCONT2 = 0 V
Pin = 0 dBm
–10
– 20
– 30
– 40
100 M 200 M
500 M 1 G 2 G 3 G
f - Frequency - Hz
OUT1
50 Ω
IN
OUT2
RLOUT
5
5 Page µPG132G
Temperature characteristics
Next, results from evaluating the temperature characteristics of the µPG132G are shown. As shown, favorable
characteristics are obtained in a range of TA = –55 to +90 ˚C. The temperature coefficient of the insertion loss is about
+0.0014 dB/˚C, indicating that the higher the temperature, the more the insertion loss.
Temperature Characteristics of Input/Output
VCONT1 = +3.0
VCONT2 = 0 V
f = 2 GHz
Non-modulated wave (CW) input
30
25
TA = –55 ˚C
TA = +25 ˚C
TA = +60 ˚C
TA = +90 ˚C
20
15
15 20 25 30 35
Pin (dBm)
Temperature Characteristics of Insertion Loss, and Double and Triple Harmonics
VCONT1 = +3 V
VCONT2 = 0 V
0.8 f = 2 GHz
Pin = +23 dBm
0.6 Non-modulated wave (CW) input LINS
0.4
0.2
–50
2fo –60
–100
3fo
–50 0 +50
TA (˚C)
–70
+100
11
11 Page |
Páginas | Total 14 Páginas | |
PDF Descargar | [ Datasheet UPG132G.PDF ] |
Número de pieza | Descripción | Fabricantes |
UPG132G | L-BAND SPDT SWITCH | NEC |
UPG132G | L-BAND SPDT SWITCH | NEC |
UPG132G | L-BAND SPDT SWITCH | NEC |
UPG132G | L-BAND SPDT SWITCH | NEC |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |