DataSheet.jp

UPD784217AY の電気的特性と機能

UPD784217AYのメーカーはNECです、この部品の機能は「16-BIT SINGLE-CHIP MICROCONTROLLERS」です。


製品の詳細 ( Datasheet PDF )

部品番号 UPD784217AY
部品説明 16-BIT SINGLE-CHIP MICROCONTROLLERS
メーカ NEC
ロゴ NEC ロゴ 




このページの下部にプレビューとUPD784217AYダウンロード(pdfファイル)リンクがあります。
Total 70 pages

No Preview Available !

UPD784217AY Datasheet, UPD784217AY PDF,ピン配置, 機能
DATA SHEET
MOS INTEGRATED CIRCUIT
µPD784214A, 784215A, 784216A, 784217A, 784218A, 784214AY, 784215AY, 784216AY, 784217AY, 784218AY
16-BIT SINGLE-CHIP MICROCONTROLLERS
DESCRIPTION
The µPD784214A, 784215A, 784216A, 784217A, and 784218A are products of the µPD784216A/784218A
Subseries in the 78K/IV Series. Besides a high-speed and high performance CPU, these controllers have ROM,
RAM, I/O ports, 8-bit resolution A/D and D/A converters, timers, serial interfaces, a real-time output port, interrupt
functions, and various other peripheral hardware.
The µPD784214AY, 784215AY, 784216AY, 784217AY, and 784218AY are based on the µPD784216Y/784218Y
Subseries with the addition of a multimaster-supporting I2C bus interface.
The µPD78F4218A and 78F4218AY, products with a flash memory instead of the internal ROM of mask ROM
versions, and various development tools are also available.
Detailed function descriptions are provided in the following user’s manuals. Be sure to read them before
designing.
µPD784216A, 784216AY Subseries User’s Manual Hardware: U13570E
µPD784218A, 784218AY Subseries User’s Manual Hardware: U12970E
78K/IV Series User’s Manual Instructions:
U10905E
FEATURES
78K/IV Series
Inherits peripheral functions of µPD78078, 78078Y
Subseries
Minimum instruction execution time
160 ns
(@fXX = 12.5 MHz operation with main system clock)
61 µs
(@fXT = 32.768 kHz operation with subsystem clock)
I/O port: 86 pins
Timer/event counter:
16-bit timer/event counter × 1 unit
8-bit timer/event counter × 6 units
Serial interface: 3 channels
UART/IOE (3-wire serial I/O): 2 channels
CSI (3-wire serial I/O, I2C bus supporting
multimaster Note): 2 channels
Note µPD784216AY/784218AY Subseries only
Supply voltage: VDD = 1.8 to 5.5 V
Standby function
HALT/STOP/IDLE mode
In low-power consumption mode: HALT/IDLE mode
(with subsystem clock)
Clock division function
Watch timer: 1 channel
Watchdog timer: 1 channel
Clock output function
Selectable from fXX, fXX/2, fXX/22, fXX/23, fXX/24, fXX/25,
fXX/26, fXX/27, fXT
Buzzer output function
Selectable from fXX/210, fXX/211, fXX/212, fXX/213
A/D converter: 8-bit resolution × 8 channels
D/A converter: 8-bit resolution × 2 channels
APPLICATIONS
Cellular phones, PHS, cordless telephones, CD-ROM, AV equipment
Unless otherwise specified, references in this document to the µPD784218A, 784218AY refer to the
µPD784214A, 784215A, 784216A, 784217A, 784218A, 784214AY, 784215AY, 784216AY, 784217AY, and
784218AY.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. U14121EJ2V0DS00 (2nd edition)
Date Published August 2000 N CP(K)
Printed in Japan
The mark shows major revised points.
2000

1 Page





UPD784217AY pdf, ピン配列
µPD784214A, 784215A, 784216A, 784217A, 784218A, 784214AY, 784215AY, 784216AY, 784217AY, 784218AY
78K/IV SERIES LINEUP
: Products in mass-production
: Products under development
Standard models
µPD784026
Enhanced
A/D converter,
16-bit timer, and
power management
Supports I2C bus
µPD784038Y
µ PD784038
Enhanced internal memory capacity
Pin-compatible with the µPD784026
Supports multimaster I2C bus
µPD784216AY
µPD784216A
100-pin, enhanced I/O and
internal memory capacity
µ PD784054
ASSP models
µPD784956A
For DC inverter control
µ PD784908
On-chip IEBusTM controller
µPD784915
Software servo control
On-chip analog circuit for VCRs
Enhanced timer
µPD784046
On-chip 10-bit A/D converter
µPD784938A
Enhanced functions of the
µ PD784908, enhanced
internal memory capacity,
ROM correction added.
Supports multimaster I2C bus
µPD784928Y
µPD784928
Enhanced functions
of the µPD784915
µPD784976A
On-chip VFD controller/driver
Supports multimaster I2C bus
µPD784225Y
µPD784225
80-pin, ROM correction added
Supports multimaster I2C bus
µPD784218AY
µPD784218A
Enhanced internal memory
capacity, ROM correction added
µ PD784967
Enhanced functions of the
µPD784938A, enhanced
I/O and internal memory
capacity.
Data Sheet U14121EJ2V0DS00
3


3Pages


UPD784217AY 電子部品, 半導体
µPD784214A, 784215A, 784216A, 784217A, 784218A, 784214AY, 784215AY, 784216AY, 784217AY, 784218AY
CONTENTS
1. DIFFERENCES AMONG MODELS IN µPD784216A, 784216AY/784218A, 784218AY SUBSERIES....... 8
2. MAJOR DIFFERENCES FROM µPD78078Y SUBSERIES ................................................................ 9
3. PIN CONFIGURATION (TOP VIEW).................................................................................................. 10
4. BLOCK DIAGRAM ............................................................................................................................... 13
5. PIN FUNCTIONS .................................................................................................................................. 14
5.1 Port Pins ...................................................................................................................................... 14
5.2 Non-Port Pins .............................................................................................................................. 16
5.3 Pin I/O Circuits and Recommended Connections of Unused Pins ........................................ 18
6. CPU ARCHITECTURE ......................................................................................................................... 22
6.1 Memory Space ............................................................................................................................. 22
6.2 CPU Registers.............................................................................................................................. 29
6.2.1 General-purpose registers ..............................................................................................................29
6.2.2 Control registers..............................................................................................................................30
6.2.3 Special function registers (SFRs)....................................................................................................31
7. PERIPHERAL HARDWARE FUNCTIONS.......................................................................................... 36
7.1 Ports ............................................................................................................................................. 36
7.2 Clock Generator........................................................................................................................... 37
7.3 Real-Time Output Port ................................................................................................................ 39
7.4 Timer/Event Counter ................................................................................................................... 40
7.5 A/D Converter .............................................................................................................................. 42
7.6 D/A Converter .............................................................................................................................. 43
7.7 Serial Interface............................................................................................................................. 44
7.7.1 Asynchronous serial interface/3-wire serial I/O (UART/IOE) ..........................................................45
7.7.2 Clocked serial interface (CSI) .........................................................................................................47
7.8 Clock Output Function................................................................................................................ 49
7.9 Buzzer Output Function.............................................................................................................. 49
7.10 Edge Detection Function .......................................................................................................... 50
7.11 Watch Timer ............................................................................................................................... 50
7.12 Watchdog Timer ........................................................................................................................ 51
8. INTERRUPT FUNCTIONS.................................................................................................................... 52
8.1 Interrupt Sources......................................................................................................................... 52
8.2 Vectored Interrupt ....................................................................................................................... 54
8.3 Context Switching ....................................................................................................................... 55
8.4 Macro Service .............................................................................................................................. 56
8.5 Application Example of Macro Service ..................................................................................... 57
6 Data Sheet U14121EJ2V0DS00

6 Page



ページ 合計 : 70 ページ
 
PDF
ダウンロード
[ UPD784217AY データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
UPD784217A

16-BIT SINGLE-CHIP MICROCONTROLLERS

NEC
NEC
UPD784217AGC

16-BIT SINGLE-CHIP MICROCONTROLLERS

NEC
NEC
UPD784217AGF

16-BIT SINGLE-CHIP MICROCONTROLLERS

NEC
NEC
UPD784217AY

16-BIT SINGLE-CHIP MICROCONTROLLERS

NEC
NEC


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap