DataSheet.jp

UPD784044GC の電気的特性と機能

UPD784044GCのメーカーはNECです、この部品の機能は「16-BIT SINGLE-CHIP MICROCONTROLLER」です。


製品の詳細 ( Datasheet PDF )

部品番号 UPD784044GC
部品説明 16-BIT SINGLE-CHIP MICROCONTROLLER
メーカ NEC
ロゴ NEC ロゴ 




このページの下部にプレビューとUPD784044GCダウンロード(pdfファイル)リンクがあります。

Total 70 pages

No Preview Available !

UPD784044GC Datasheet, UPD784044GC PDF,ピン配置, 機能
DATA SHEET
MOS INTEGRATED CIRCUIT
µPD784044(A), 784046(A)
16-BIT SINGLE-CHIP MICROCONTROLLER
DESCRIPTION
The µPD784046(A) is a model in the µPD784046 subseries within the 78K/IV series. A stricter quality assurance
program applies µPD784046(A) compared to the µPD784046 (standard model). (In terms of NEC’s quality grading,
this is a ”special” grade product.)
The µPD784046(A) is provided with many peripheral hardware functions such as ROM, RAM, I/O port, 10-bit
resolution A/D converter, timer, serial interface, and interrupt functions, in addition to a high-speed, high-performance
CPU.
The µPD784046(A) is under development.
Moreover, a flash memory model, µPD78F4046Note, that can operate on the same supply voltage as the mask ROM
model, and many development tools are under development.
Note Use for functional evaluation only.
The functions are described in detail in the following User’s Manuals. Be sure to read these manuals when
designing your system.
µPD784046 Subseries User’s Manual - Hardware : U11515E
78K/IV Series User’s Manual - Instruction
: U10905E
FEATURES
• Higher reliability compared to the µPD784044 and 784046
• Minimum instruction execution time : 160 ns (with 12.5-MHz internal clock) ··· µPD784044(A), 784046(A)
200 ns (with 10-MHz internal clock) ··· µPD784044(A1), (A2),
784046(A1), (A2)
• I/O port
: 65 lines
• Timer
: 16-bit timer/counter × 2 units
16-bit timer × 3 units
• A/D converter
: 10-bit resolution × 16 channels
• Serial interface
UART/IOE (3-wire serial I/O) : 2 channels
• Watchdog timer
: 1 channel
• Standby function
HALT/STOP/IDLE mode
• Supply voltage
: VDD = 4.5 to 5.5 V
APPLICATION FIELDS
Automotive appliances, etc.
In this document, in addition to the µPD784044(A) and µPD784046(A), the µPD784044(A1), 784044(A2)
784046(A1), and 784046(A2) are also explained. However, unless otherwise specified, the µPD784046(A) is
treated as the representative model throughout this document.
The information in this document is subject to change without notice.
Document No. U13121EJ1V0DS00 (1st edition)
Date Published January 1998 N CP(K)
Printed in Japan
©
1998

1 Page





UPD784044GC pdf, ピン配列
Product Development of 78K/IV Series
: Under mass production
: Under development
µPD784044(A), 784046(A)
Standard models
µPD784026
A/D, 16-bit timer, improved
power management
For I2C bus
µPD784038Y
µPD784038
Improved internal memory capacity,
pin compatible with µPD784026
For multimaster I2C bus
µPD784216Y
µPD784216
100 pins, I/O, improved
internal memory capacity
µPD784054
For multimaster I2C bus
µPD784225Y
µPD784225
80 pins, ROM correction added
For multimaster I2C bus
µPD784218Y
µPD784218
Improved internal memory
capacity, ROM correction added
ASSP models
µPD784046
Internal 10-bit A/D
µPD784955
For DC converter control
µPD784908
Internal IEBusTM controller
For multimaster I2C bus
µPD78F4943
µPD784928Y
For CD-ROM
Flash memory: 56 KB
µPD784928
Improved functions of µPD784915
µPD784915
Software servo control,
internal analog circuit
for VCR, improved timer
3


3Pages


UPD784044GC 電子部品, 半導体
µPD784044(A), 784046(A)
10. STANDBY FUNCTION .......................................................................................................................50
11. RESET FUNCTION ............................................................................................................................51
12. INSTRUCTION SET ...........................................................................................................................52
13. ELECTRICAL SPECIFICATIONS ......................................................................................................57
14. PACKAGE DRAWING .......................................................................................................................80
15. RECOMMENDED SOLDERING CONDITIONS ................................................................................81
APPENDIX A. DEVELOPMENT TOOLS ................................................................................................82
APPENDIX B. RELATED DOCUMENTS ...............................................................................................85
6

6 Page



ページ 合計 : 70 ページ
 
PDF
ダウンロード
[ UPD784044GC データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
UPD784044GC

16-BIT SINGLE-CHIP MICROCONTROLLER

NEC
NEC
UPD784044GCA

16-BIT SINGLE-CHIP MICROCONTROLLER

NEC
NEC
UPD784044GCA1

16-BIT SINGLE-CHIP MICROCONTROLLER

NEC
NEC
UPD784044GCA2

16-BIT SINGLE-CHIP MICROCONTROLLER

NEC
NEC


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap