DataSheet.jp

UPD753016AGK の電気的特性と機能

UPD753016AGKのメーカーはNECです、この部品の機能は「4-BIT SINGLE-CHIP MICROCONTROLLER」です。


製品の詳細 ( Datasheet PDF )

部品番号 UPD753016AGK
部品説明 4-BIT SINGLE-CHIP MICROCONTROLLER
メーカ NEC
ロゴ NEC ロゴ 




このページの下部にプレビューとUPD753016AGKダウンロード(pdfファイル)リンクがあります。
Total 70 pages

No Preview Available !

UPD753016AGK Datasheet, UPD753016AGK PDF,ピン配置, 機能
DATA SHEET
MOS INTEGRATED CIRCUIT
µPD753012A, 753016A, 753017A
4-BIT SINGLE-CHIP MICROCONTROLLER
DESCRIPTION
The µPD753017A is one of the 75XL series 4-bit single-chip microcontroller chips and has a data processing
capability comparable to that of an 8-bit microcontroller.
It has an on-chip LCD controller/driver with a larger ROM capacity and extended CPU functions compared with
the conventional µPD75316B, and can provide high-speed operation at a low supply voltage of 1.8 V. It can be
supplied in a small plastic TQFP package (12 × 12 mm) and is suitable for small sets using LCD panels.
Detailed descriptions of functions are provided in the following document. Be sure to
read the document before designing.
µPD753017 User’s Manual : U11282E
FEATURES
• Low voltage operation: VDD = 1.8 to 5.5 V
· Can be driven by two 1.5 V batteries
• On-chip memory
· Program memory (ROM):
12288 × 8 bits (µPD753012A)
16384 × 8 bits (µPD753016A)
24576 × 8 bits (µPD753017A)
· Data memory (RAM):
1024 × 4 bits
• Capable of high-speed operation and variable instruction
execution time for power saving
· 0.95, 1.91, 3.81, 15.3 µs (at 4.19 MHz operation)
· 0.67, 1.33, 2.67, 10.7 µs (at 6.0 MHz operation)
· 122 µs (at 32.768 kHz operation)
• Internal programmable LCD controller/driver
• Small plastic TQFP (12 × 12 mm)
· Suitable for small sets such as cameras
• One-time PROM: µPD75P3018A
APPLICATION
Remote controllers, camera-integrated VCRs, cameras, gas meters, etc.
In this document, unless otherwise specified, the description is made based on µPD753017A as typical
product.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability
and additional information.
Document No. U11662EJ2V0DS00 (2nd edition)
Date Published July 2000 N CP(K)
Printed in Japan
The mark shows major revised points.
©
1996, 2000

1 Page





UPD753016AGK pdf, ピン配列
µPD753012A, 753016A, 753017A
FUNCTION OUTLINE
Parameter
Function
Instruction execution time
• 0.95, 1.91, 3.81, 15.3 µs (main system clock: at 4.19 MHz operation)
• 0.67, 1.33, 2.67, 10.7 µs (main system clock: at 6.0 MHz operation)
• 122 µs (subsystem clock: at 32.768 kHz operation)
Internal memory
ROM 12288 × 8 bits (µPD753012A)
16384 × 8 bits (µPD753016A)
24576 × 8 bits (µPD753017A)
RAM 1024 × 4 bits
General purpose register
• 4-bit operation: 8 × 4 banks
• 8-bit operation: 4 × 4 banks
Input/
output
port
CMOS input
CMOS input/output
CMOS output
8 On-chip pull-up resistors can be specified by using
16 software: 23
8 Also used for segment pins
N-ch open-drain
input/output
8 Withstands 13 V, on-chip pull-up resistors can be specified by using mask
option
Total
40
LCD controller/driver
• Segment number selection
• Display mode selection
: 24/28/32 segments (can be changed to CMOS
output port in 4 time-unit; max. 8)
: Static, 1/2 duty (1/2 bias), 1/3 duty (1/2 bias),
1/3 duty (1/3 bias), 1/4 duty (1/3 bias)
On-chip split resistor for LCD drive can be specified by using mask option
Timer
5 channels
• 8-bit timer/event counter: 3 channels (can be used for 16-bit timer/event counter, carrier
generator, timer with gate)
• Basic interval timer/watchdog timer: 1 channel
• Watch timer: 1 channel
Serial interface
• 3-wire serial I/O mode ... MSB or LSB can be selected for transferring first bit
• 2-wire serial I/O mode
• SBI mode
Bit sequential buffer
16 bits
Clock output (PCL)
Φ, 524, 262, 65.5 kHz (main system clock: at 4.19 MHz operation)
Φ, 750, 375, 93.8 kHz (main system clock: at 6.0 MHz operation)
Buzzer output (BUZ)
• 2, 4, 32 kHz
(main system clock: at 4.19 MHz operation
or subsystem clock: at 32.768 kHz operation)
• 2.93, 5.86, 46.9 kHz (main system clock: at 6.0 MHz operation)
Vectored interrupt
External: 3, Internal: 5
Test input
External: 1, Internal: 1
System clock oscillator
• Ceramic or crystal oscillator for main system clock oscillation
• Crystal oscillator for subsystem clock oscillation
Standby function
STOP/HALT mode
Power supply voltage
VDD = 1.8 to 5.5 V
Package
• 80-pin plastic QFP (14 × 14 mm)
• 80-pin plastic TQFP (fine pitch) (12 × 12 mm)
Data Sheet U11662EJ2V0DS00
3


3Pages


UPD753016AGK 電子部品, 半導体
µPD753012A, 753016A, 753017A
1. PIN CONFIGURATION (Top View)
• 80-pin plastic QFP (14 × 14 mm)
µPD753012AGC-XXX-3B9, 753012AGC-XXX-8BT, 753016AGC-XXX-3B9, 753016AGC-XXX-8BT
µPD753017AGC-XXX-3B9, 753017AGC-XXX-8BT
• 80-pin plastic TQFP (fine pitch) (12 × 12 mm)
µPD753012AGK-XXX-BE9, 753012AGK-XXX-9EU, 753016AGK-XXX-BE9, 753016AGK-XXX-9EU
µPD753017AGK-XXX-BE9, 753017AGK-XXX-9EU
S12
S13
S14
S15
S16
S17
S18
S19
S20
S21
S22
S23
S24/BP0
S25/BP1
S26/BP2
S27/BP3
S28/BP4
S29/BP5
S30/BP6
S31/BP7
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61
1 60
2 59
3 58
4 57
5 56
6 55
7 54
8 53
9 52
10 51
11 50
12 49
13 48
14 47
15 46
16 45
17 44
18 43
19 42
2021 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 4041
P60/KR0
X2
X1
ICNote
XT2
XT1
VDD
P33
P32
P31/SYNC
P30/LCDCL
P23/BUZ
P22/PCL/PTO2
P21/PTO1
P20/PTO0
P13/TI0
P12/INT2/TI1/TI2
P11/INT1
P10/INT0
P03/SI/SB1
Note Connect the IC (Internally Connected) pin directly to VDD.
6 Data Sheet U11662EJ2V0DS00

6 Page



ページ 合計 : 70 ページ
 
PDF
ダウンロード
[ UPD753016AGK データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
UPD753016AGC

4-BIT SINGLE-CHIP MICROCONTROLLER

NEC
NEC
UPD753016AGK

4-BIT SINGLE-CHIP MICROCONTROLLER

NEC
NEC


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap