DataSheet.jp

P6KE16 の電気的特性と機能

P6KE16のメーカーはGeneral Semiconductorです、この部品の機能は「TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR」です。


製品の詳細 ( Datasheet PDF )

部品番号 P6KE16
部品説明 TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR
メーカ General Semiconductor
ロゴ General Semiconductor ロゴ 




このページの下部にプレビューとP6KE16ダウンロード(pdfファイル)リンクがあります。

Total 4 pages

No Preview Available !

P6KE16 Datasheet, P6KE16 PDF,ピン配置, 機能
P6KE6.8 THRU P6KE440CA
TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR
Breakdown Voltage - 6.8 to 440 Volts Peak Pulse Power- 600 Watts
DO-204AC
1.0
(25.4)
MIN.
0.034 (0.86)
0.028 (0.71)
DIA.
0.300 (7.6)
0.230 (5.8)
1.0
(25.4)
MIN.
0.140 (3.6)
0.104 (2.6)
DIA.
Dimensions in inches
and
(millimeters)
FEATURES
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
Glass passivated junction
600W peak pulse power capability with a 10/1000µs
waveform, repetition rate (duty cycle): 0.01%
Excellent clamping
capability
Low incremental surge resistance
Fast response time: typically less
than 1.0ps from 0 Volts to V(BR) for
uni-directional and 5.0ns for bi-directional types
Typical ID less than 1µA above 10V
High temperature soldering guaranteed:
265°C/10 seconds, 0.375" (9.5mm) lead length,
5lbs. (2.3 kg) tension
MECHANICAL DATA
Case: JEDEC DO-204AC molded plastic body over
passivated junction
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: For uni-directional types the color band denotes
the cathode, which is postitive with respect to the anode
under normal TVS operation
Mounting Position: Any
Weight: 0.015 ounce, 0.4 gram
DEVICES FOR BIDIRECTIONAL APPLICATIONS
For bi-directional use C or CA Suffix for types P6KE6.8 thru types P6KE440 (e.g. P6KE6.8C, P6KE440CA).
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Peak pulse power dissipation with a 10/1000µs
waveform (NOTE 1, FIG. 1)
Peak pulse current with a 10/1000µs waveform
(NOTE 1)
Steady state power dissipation at TL=75°C
lead lengths, 0.375" (9.5mm) (NOTE 2)
Peak forward surge current, 8.3ms single half
sine-wave superimposed on rated load
(JEDEC Method) unidirectional only (NOTE 3)
Maximum instantaneous forward voltage at 50.0A for
unidirectional only (NOTE 4)
Operating junction and storage temperature range
SYMBOL
PPPM
IPPM
PM(AV)
IFSM
VF
TJ, TSTG
VALUE
Minimum 600
SEE TABLE 1
5.0
100.0
3.5/5.0
-55 to +175
NOTES:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2
(2) Mounted on copper pad area of 1.6 x 1.6” (40 x 40mm) per Fig. 5
(3) Measured on 8.3ms single half sine-wave or equivalent square wave duty cycle=4 pulses per minute maximum
(4) VF=3.5 Volt max. for devices of V(BR)220V, and VF=5.0V for devices of V(BR)>220V
UNITS
Watts
Amps
Watts
Amps
Volts
°C
1/21/99

1 Page





P6KE16 pdf, ピン配列
ELECTRICAL CHARACTERISTICS at (TA=25°C unless otherwise noted) TABLE (Cont’d)
Device Type
P6KE91A
P6KE100
P6KE100A
P6KE110
P6KE110A
P6KE120
P6KE120A
P6KE130
P6KE130A
P6KE150
P6KE150A
P6KE160
P6KE160A
P6KE170
P6KE170A
P6KE180
P6KE180A
P6KE200
P6KE200A
P6KE220
P6KE220A
P6KE250
P6KE250A
P6KE300
P6KE300A
P6KE350
P6KE350A
P6KE400
P6KE400A
P6KE440
P6KE440A
Breakdown Voltage
V(BR)
Volts (NOTE 1)
MIN
86.5
90.0
95.0
99.0
105
108
114
117
124
135
143
144
152
153
162
162
171
180
190
198
209
225
237
270
285
315
333
360
380
396
418
MAX
95.5
110
105
121
116
132
126
143
137
165
158
176
168
187
179
198
189
220
210
242
231
275
263
330
315
385
368
440
420
484
462
Test
Current
at IT
(mA)
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
Stand-off
Voltage
VWM
(Volts)
77.8
81.0
85.5
89.2
94.0
97.2
102
105
111
121
128
130
136
138
145
146
154
162
171
175
185
202
214
243
256
284
300
324
342
356
376
Maximum
Reverse
Leakage
at VWM
ID (µA)
(NOTE3)
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
Maximum
Peak Pulse
Current
IPPM
(Amps)
(NOTE 2)
4.8
4.2
4.4
3.8
3.9
3.5
3.6
3.2
3.4
2.8
2.9
2.6
2.7
2.5
2.6
2.3
2.4
2.1
2.2
1.7
1.8
1.7
1.7
1.4
1.4
1.2
1.2
1.0
1.1
0.95
1.0
Maximum
Clamping
Voltage at
IPPM
VC (Volts)
Maximum
Temperature
Coefficient
of V(BR)
(% / C)
125 0.106
144 0.106
137 0.106
158 0.107
152 0.107
173 0.107
165 0.107
187 0.107
179 0.107
215 0.108
207 0.108
230 0.108
219 0.108
244 0.108
234 0.108
258 0.108
246 0.108
287 0.108
274 0.108
344 0.108
328 0.108
360 0.110
344 0.110
430 0.110
414 0.110
504 0.110
482 0.110
574 0.110
548 0.110
631 0.110
602 0.110
NOTES:
(1) V(BR) measured after IT applied for 300µs, IT=square wave pulse or equivalent
(2) Surge current waveform per Fig. 3 and derate per Fig. 2
(3) For bidirectional types with VWM of 10 volts and less, the ID limit is doubled
(4) All terms and symbols are consistent with ANSI/IEEE C62.35
+UL listed for Telecom application protection 497B, file number E136766 for both uni-directional and bi-directional devices
DESCRIPTION
This P6KE TVS series is a low cost commercial product for use in applications where large voltage transients can permanently
damage voltage-sensitive components.
The P6KE series device types are designed in a small package size where power and space is a consideration. They are character-
ized by their high surge capability, extremely fast response time, and low impedance, (Ron). Because of the unpredictable nature of
transients, and the variation of the impedance with respect to these transients, impedance, per se, is not specified as a parametric
value. However, a minimum voltage at low current conditions (BV) and a maximum clamping voltage (Vc) at a maximum peak pulse
current is specified.
In some instances, the thermal effect (see Vc Clamping Voltage) may be responsible for 50% to 70%. of the observed voltage differ-
ential when subjected to high current pulses for several duty cycles, thus making a maximum impedance specification insignificant.
In case of a severe current overload or abnormal transient beyond the maximum ratings, the Transient Voltage Suppressor will initially
fail 'short' thus tripping the system's circuit breaker or fuse while protecting the entire circuit. Curves depicting clamping voltage vs.
various current pulses are available from the factory. Extended power curves vs. pulse time are also available.


3Pages





ページ 合計 : 4 ページ
 
PDF
ダウンロード
[ P6KE16 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
P6KE10

TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR

General Semiconductor
General Semiconductor
P6KE10

Zener Diode ( Rectifier )

Microsemi Corporation
Microsemi Corporation
P6KE10

TRANSIENT VOLTAGE SUPPRESSORS DIODE

Jinan Gude Electronic Device
Jinan Gude Electronic Device
P6KE10

600W TRANSIENT VOLTAGE SUPPRESSORS

Won-Top Electronics
Won-Top Electronics


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap