DataSheet.jp

XMT5170A-622-AS の電気的特性と機能

XMT5170A-622-ASのメーカーはAgilent(Hewlett-Packard)です、この部品の機能は「622 Mb/s Logic Interface DFB Laser Transmitter」です。


製品の詳細 ( Datasheet PDF )

部品番号 XMT5170A-622-AS
部品説明 622 Mb/s Logic Interface DFB Laser Transmitter
メーカ Agilent(Hewlett-Packard)
ロゴ Agilent(Hewlett-Packard) ロゴ 




このページの下部にプレビューとXMT5170A-622-ASダウンロード(pdfファイル)リンクがあります。
Total 6 pages

No Preview Available !

XMT5170A-622-AS Datasheet, XMT5170A-622-AS PDF,ピン配置, 機能
622 Mb/s Logic Interface DFB
Laser Transmitter
Preliminary Technical Data
XMT5170-622
Features
• SONET/SDH Compliant to
STM4 L-4.1
OC12 LR-1
• –40°C to +85°C Operation
• Compact 20 Pin Package
• ECL/PECL Logic Interface
• Multisourced Pinout
Applications
• SONET/SDH Systems
• Fiber to the Home
• Data Communications
Networks
Description
The XMT5170-622 is a high
performance uncooled optical
DFB laser transmitter for CCITT
SDH and ANSI SONET
applications. It is designed with
an ECL/PECL logic interface for
622 MBd transmission.
The transmitter incorporates
several features which simplify
system design. The
XMT5170-622 may be operated
with either +5 V or –5 V power
supplies. Its standard 10 KH ECL
data interface enables direct
interface with PECL or ECL logic.
The compact transmitter module
contains a pigtailed laser, data
interface, bias and modulation
control circuitry. Thus, no
external components or adjust-
ments are necessary. Finally, a
laser disable input is provided to
shut down the laser for standby
or test purposes.
The XMT5170-622 includes
analog outputs which are
proportional to laser current and
optical power. These may be used
with external circuitry to detect
end-of-life, or over temperature
conditions.
The transmitter is packaged in a
20 pin 0.4" pitch DIP. Contact
your local representative for
more details.
Preliminary Product Disclaimer
This preliminary data sheet is provided to assist you in the evaluation of engineering samples of the product which is under development
and targeted for release during 1997. Until Hewlett-Packard releases this product for general sales, HP reserves the right to alter prices,
specifications, features, capabilities, function, manufacturing release dates, and even general availability of the product at any time.
430 (5/97)

1 Page





XMT5170A-622-AS pdf, ピン配列
XMT5170-622 Block Diagram
DATA
DATA
DISABLE
ECL
INPUT
LASER
MODULATOR
LASER
PHOTODIODE
(REAR FACET
MONITOR)
LASER
BIAS
DRIVER
LASER BIAS
MONITOR
LASER
BIAS
CONTROL
REAR FACET
MONITOR
Functional Description
The ECL input allows operation
from many logic families and
both single-ended or differential
signals. For single-ended
operation both DATA and DATA
are internally tied to a VBB. The
unused input then requires no
connection or biasing.
The disable function disables the
laser bias and modulator. The
switching threshold is VCC –3.2 V.
If this input is not connected the
module is enabled. This input
may be connected to a CMOS HI
or tied to VCC to disable.
The module provides the
necessary bias and modulation
control to maintain the extinction
ratio at better than 10 dB and the
waveform is compliant with
SONET/SDH Eyemask standard
G.957.
The laser bias control loop
compensates for temperature
induced variations in laser
performance. The bias current
monitor indicates the amount of
dc current supplied to the laser.
(This is approximately the laser
threshold current).
The rear facet monitor is a signal
proportional to the laser output
power. This can be used as part
of a HI/LO light alarm.
In the absence of data the laser
will emit a mean optical power
within the specified limits. The
extinction ratio and duty cycle
distortion are specified assuring a
50% duty cycle at the correct
data rate.
432


3Pages


XMT5170A-622-AS 電子部品, 半導体
Ordering Information
XMT5170X 622 - XX
Allowable part numbers:
XMT5170A-622-AP
XMT5170A-622-AS
XMT5170B-622-AP
XMT5170B-622-AS
Connector:
AP = Angled FC/PC
AS = Angled SC
Temperature Option:
A = –40°C to +85°C
B = 0°C to +70°C
Model Name:
XMT5170
Handling Precautions
1. Normal handling precautions
for electrostatic sensitive
devices should be taken.
2. Semiconductor lasers can be
damaged by overloading or by
current surges. Appropriate
transient protection should be
taken.
435

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ XMT5170A-622-AS データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
XMT5170A-622-AP

622 Mb/s Logic Interface DFB Laser Transmitter

Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)
XMT5170A-622-AS

622 Mb/s Logic Interface DFB Laser Transmitter

Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap