DataSheet.jp

IR21366 PDF Datasheet ( 特性, スペック, ピン接続図 )

部品番号 IR21366
部品説明 3-PHASE BRIDGE DRIVER
メーカ International Rectifier
ロゴ International Rectifier ロゴ 



Total 30 pages
		

No Preview Available !

IR21366 Datasheet, IR21366 PDF,ピン配置, 機能
Data Sheet No. PD60166 revS
IR2136/IR21362/IR21363/IR21365/
IR21366/IR21367/IR21368 (J&S) & (PbF)
Features
3-PHASE BRIDGE DRIVER
Floating channel designed for bootstrap operation
Fully operational to +600V
Packages
Tolerant to negative transient voltage - dV/dt immune
Gate drive supply range from 10 to 20V (IR2136/IR21368),
11.5 to 20V (IR21362) or 12 to 20V (IR21363/IR21365/
IR21366/IR21367)
Undervoltage lockout for all channels
Over-current shutdown turns off all six drivers
Independent 3 half-bridge drivers
Matched propagation delay for all channels
Cross-conduction prevention logic
Lowside outputs out of phase with inputs. High side
28-Lead SOIC
28-Lead PDIP
44-Lead PLCC w/o 12 leads
outputs out of phase (IR2136/IR21363/IR21365/
IR21366/IR21367/IR21368) or in phase
Feature Comparison: IR2136/IR21362/IR21363/
(IR21362) with inputs.
IR21365/IR21366/IR21367/IR21368
3.3V logic compatible
Lower di/dt gate driver for
Part IR2136 IR21362 IR21363 IR21365 IR21366 IR21367 IR21368
Input Logic HIN, LIN HIN/LIN HIN, LIN HIN, LIN HIN, LIN HIN, LIN HIN,LIN
better noise immunity
Externally programmable
Ton (typ.) 400ns
Toff (typ.) 380ns
400ns
380ns
400ns
380ns
400ns 250ns
380ns 180ns
250ns
180ns
400ns
380ns
delay for automatic fault
clear
Also available LEAD-FREE
VIH (typ.)
VIL (typ.)
Vitrip+
2.7V
1.7V
0.46V
2.7V
1.7V
0.46V
2.7V
1.7V
0.46V
2.7V
1.7V
4.3V
2.0V
1.3V
0.46V
2.0V
1.3V
4.3V
2.0V
1.3V
4.3V
UV CC/BS+ 8.9V
10.4V 11.2V 11.2V 11.2V 11.2V 8.9V
Description
UV CC/BS- 8.2V
9.4V
11.0V 11.0V 11.0V 11.0V 8.2V
The IR2136/IR21362/IR21363/IR21365/IR21366/IR21367/IR21368(J&S) are high votage, high speed power MOSFET
and IGBT drivers with three independent high and low side referenced output channels for 3-phase applications.
Proprietary HVIC technology enables ruggedized monolithic construction. Logic inputs are compatible with CMOS
or LSTTL outputs, down to 3.3V logic. A current trip function which terminates all six outputs can be derived from
an external current sense resistor. An enable function is available to terminate all six outputs simultaneously. An
open-drain FAULT signal is provided to indicate that an overcurrent or undervoltage shutdown has occurred.
Overcurrent fault conditions are cleared automatically after a delay programmed externally via an RC network
connected to the RCIN input. The output drivers feature a high pulse current buffer stage designed for minimum
driver cross-conduction. Propagation delays are matched to simplify use in high frequency applications. The
floating channel can be used to drive N-channel power MOSFETs or IGBTs in the high side configuration which
operates up to 600 volts.
Typical Connection
VCC
HIN1,2,3 / HIN1,2,3
LIN1,2,3
(Refer to Lead Assign-
ments for correct pin con-
figuration). This/These
diagram(s) show electri-
cal connections only.
Please refer to our Appli-
cation Notes and
DesignTips for proper cir-
cuit board layout.
FAULT
EN
GND
VCC
HIN1,2,3 / HIN1,2,3
LIN1,2,3
FAULT
EN
RCIN
ITRIP
VSS
VB1,2,3
HO1,2,3
VS1,2,3
LO1,2,3
COM
up to 600V
TO
LOAD
IR2136(2)(3)(5)(6)(7)(8)
www.irf.com
1

1 Page





ページ 合計 : 30 ページ
PDF
ダウンロード
[ IR21366.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
IR2136

3-PHASE BRIDGE DRIVER

International Rectifier
International Rectifier
IR21362

3-PHASE BRIDGE DRIVER

International Rectifier
International Rectifier
IR21363

3-PHASE BRIDGE DRIVER

International Rectifier
International Rectifier
IR21365

3-PHASE BRIDGE DRIVER

International Rectifier
International Rectifier

www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap