DataSheet.jp

IP120M-05 の電気的特性と機能

IP120M-05のメーカーはSeme LABです、この部品の機能は「0.5 AMP NEGATIVE VOLTAGE REGULATOR」です。


製品の詳細 ( Datasheet PDF )

部品番号 IP120M-05
部品説明 0.5 AMP NEGATIVE VOLTAGE REGULATOR
メーカ Seme LAB
ロゴ Seme LAB ロゴ 




このページの下部にプレビューとIP120M-05ダウンロード(pdfファイル)リンクがあります。
Total 4 pages

No Preview Available !

IP120M-05 Datasheet, IP120M-05 PDF,ピン配置, 機能
IP120MA SERIES
IP120M SERIES
IP79M00A SERIES
IP79M00 SERIES
2
13
!
0.5 AMP
NEGATIVE
VOLTAGE REGULATOR
Pin 1 – Ground
Pin 2 – VOUT
Case – VIN
H Package – TO–39
Pin 1 – Ground
Pin 2 – VIN
Case – VOUT
SMD Package - SMD1
CERAMIC SURFACE MOUNT
GND 1
8 NC
NC 2
7 NC
NC 3
6 VIN
VOUT 4
5 NC
8 Pin J Package
FEATURES
OUTPUT CURRENT UP TO 0.5A
OUTPUT VOLTAGES OF -5, -12, -15V
0.01% / V LINE REGULATION
0.3% / A LOAD REGULATION
THERMAL OVERLOAD PROTECTION
SHORT CIRCUIT PROTECTION
OUTPUT TRANSISTOR SOA PROTECTION
1% VOLTAGE TOLERANCE (A VERSIONS)
Order Information
Part
Number
HPack JPack SMDPack
(TO39) CERDIP SMD1
Temp.
Range
IP79MxxAzz
IP79Mxxzz
IP120MAzzxx
IP120Mzzxx
-55 to +150°C
Note:
xx = Voltage Code
zz = Package Code
(05, 12, 15)
(H, J)
eg.
IP79M05J
IP120MAH12
DESCRIPTION
The IP120MA and IP79M00A series of voltage
regulators are fixed output regulators intended for
local, on-card voltage regulation. These devices are
available in -5, -12, and -15 volt options and are
capable of delivering in excess of 500mA over
temperature.
The A suffix devices are fully specified at 0.5A,
provide 0.01% / V line regulation, 0.3% / A load
regulation, and ±1% output voltage tolerance at room
temperature. Protection features include safe
operating area, current limiting and thermal
shutdown.
ABSOLUTE MAXIMUM RATINGS (TC = 25°C unless otherwise stated)
VI DC Input Voltage
(for VO = -5, -12, -15V)
PD Power Dissipation
RqJC
Thermal Resistance Junction to Case
H Package
SMD Package
-35V
Internally limited
20°C / W
TBA°C / W
RqJA
Thermal Resistance Junction to Ambient
H Package
J Package
120°C / W
119°C / W
TJ Operating Junction Temperature Range
Tstg Storage Temperature
55 to 150°C
65 to 150°C
Note 1. Although power dissipation is internally limited, these specifications are applicable for maximum power dissipation
PMAX of 2W for the H–Package ,1.05W for the J–Package and 15W for the SG–Package.
Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: [email protected] Website: http://www.semelab.co.uk
Prelim. 9/00

1 Page





IP120M-05 pdf, ピン配列
IP120MA SERIES
IP120M SERIES
IP79M00A SERIES
IP79M00 SERIES
ELECTRICAL CHARACTERISTICS
Parameter
Test Conditions
IO = 100mA
VIN = -19V
VO
Output Voltage
IO = 5mA to 350mA
PD £ PMAX
VIN = -14.5V to -30V
TJ = -55 to 150°C
VIN = -14.5V to -30V
DVO Line Regulation IO = 350mA
VIN = -15V to -25V
TJ = -55 to 150°C
DVO
Load Regulation
IO = 5mA to 500mA
VIN = -19V
TJ = -55 to 150°C
IQ Quiescent Current VIN = -19V
IO = 350mA
TJ = -55 to 150°C
IO = 5mA to 500mA
DIQ Quiescent Current VIN = -19V
TJ = -55 to 150°C
Change
IO = 200mA
VIN = -14.5V to -30V
TJ = -55 to 150°C
VN Output Noise
Voltage
f = 10Hz to 100kHz
DVIN
DVO
Ripple Rejection
Dropout Voltage
Isc Short Circuit
Current
f = 120Hz
VIN = -15V to
-25V
IO = 350mA
VIN = -35V
IO = 300mA
IO = 100mA
TJ = -55 to 150°C
Ipk Peak Output
Current
VIN = -19V
Average Temperature
Coefficient of VO
IO = 5mA
IP79M12A
IP120MA12
Min. Typ. Max.
-11.88 -12 -12.12
-11.64
-12.36
4 18
4 18
10 60
1.5 3
0.1 0.4
0.1 0.4
96 960
58 72
58 72
1.1 2.3
300 600
0.5 1.0 1.4
1.2 4.8
IP79M12
IP120M12
Min. Typ. Max.
-11.5 -12 -12.5
Units
-11.4
-12.6
V
80
mV
50
240 mV
1.5 3 mA
0.4
mA
0.4
960 mV
54
dB
54
2.3 V
300 600 mA
0.5 1.0 1.6 A
mV
1.2
°C
1) All characteristics are measured with a capacitor across the input of 0.22mF and a capacitor across the output of 0.1mF.
All characteristics except noise voltage and ripple rejection ratio are measured using pulse techniques (tp £ 10ms, d £ 5%). Output
voltage changes due to changes in internal temperature must be taken into account separately.
2) Test Conditions unless otherwise stated: TJ = 25°C
PMAX = 2W for H Package (TO39)
PMAX = 1.05W for J Package (CERDIP)
PMAX = 15W for SMD Package (SMD1)
Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: [email protected] Website: http://www.semelab.co.uk
Prelim. 9/00


3Pages





ページ 合計 : 4 ページ
 
PDF
ダウンロード
[ IP120M-05 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
IP120M-05

0.5 AMP NEGATIVE VOLTAGE REGULATOR

Seme LAB
Seme LAB


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap