DataSheet.jp

INA116UA の電気的特性と機能

INA116UAのメーカーはBurr-Brown Corporationです、この部品の機能は「Ultra Low Input Bias Current INSTRUMENTATION AMPLIFIER」です。


製品の詳細 ( Datasheet PDF )

部品番号 INA116UA
部品説明 Ultra Low Input Bias Current INSTRUMENTATION AMPLIFIER
メーカ Burr-Brown Corporation
ロゴ Burr-Brown Corporation ロゴ 




このページの下部にプレビューとINA116UAダウンロード(pdfファイル)リンクがあります。

Total 9 pages

No Preview Available !

INA116UA Datasheet, INA116UA PDF,ピン配置, 機能
®
INA116
INA116
INA116
Ultra Low Input Bias Current
INSTRUMENTATION AMPLIFIER
FEATURES
q LOW INPUT BIAS CURRENT: 3fA typ
q BUFFERED GUARD DRIVE PINS
q LOW OFFSET VOLTAGE: 2mV max
q HIGH COMMON-MODE REJECTION:
84dB (G = 10)
q LOW QUIESCENT CURRENT: 1mA
q INPUT OVER-VOLTAGE PROTECTION: ±40V
APPLICATIONS
q LABORATORY INSTRUMENTATION
q pH MEASUREMENT
q ION–SPECIFIC PROBES
q LEAKAGE CURRENT MEASUREMENT
DESCRIPTION
The INA116 is a complete monolithic FET-input instru-
mentation amplifier with extremely low input bias
current. Difet ® inputs and special guarding techniques
yield input bias currents of 3fA at 25°C, and only 25fA
at 85°C. Its 3-op amp topology allows gains to be set
from 1 to 1000 by connecting a single external resistor.
Guard pins adjacent to both input connections can be
used to drive circuit board and input cable guards to
maintain extremely low input bias current.
The INA116 is available in 16-pin plastic DIP and SOL-16
surface-mount packages, specified for the –40°C to +85°C
temperature range.
Guard
VIN
Guard
2
3 Over-Voltage
Protection +1
4
1
RG
16
Guard
+
VIN
Guard
5
6 Over-Voltage
Protection +1
7
Difet®; Burr-Brown Corporation
V+
13
A1
25k
60k
25k
A2
60k
8
V–
INA116
60k
G = 1 + 50k
RG
A3 11 VO
60k
Ref
9
International Airport Industrial Park • Mailing Address: PO Box 11400, Tucson, AZ 85734 • Street Address: 6730 S. Tucson Blvd., Tucson, AZ 85706 • Tel: (520) 746-1111 • Twx: 910-952-1111
Internet: http://www.burr-brown.com/ • FAXLine: (800) 548-6133 (US/Canada Only) • Cable: BBRCORP • Telex: 066-6491 • FAX: (520) 889-1510 • Immediate Product Info: (800) 548-6132
©1994 Burr-Brown Corporation
PDS-1242B
Printed in U.S.A. May, 1995

1 Page





INA116UA pdf, ピン配列
PIN CONFIGURATION
Top View
RG 1
Guard – 2
VI–N 3
Guard – 4
Guard + 5
VI+N 6
Guard + 7
V– 8
16 RG
15 NC
14 NC
13 V+
12 NC
11 VO
10 NC
9 Ref
NC: No Internal Connection.
DIP
SOL-16
ABSOLUTE MAXIMUM RATINGS
Supply Voltage .................................................................................. ±18V
Input Voltage Range .......................................................................... ±40V
Output Short-Circuit (to ground) .............................................. Continuous
Operating Temperature ................................................. –40°C to +125°C
Storage Temperature ..................................................... –40°C to +125°C
Junction Temperature .................................................................... +150°C
Lead Temperature (soldering, 10s) ............................................... +300°C
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Burr-Brown
recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degradation
to complete device failure. Precision integrated circuits may
be more susceptible to damage because very small parametric
changes could cause the device not to meet its published
specifications.
PACKAGE INFORMATION
PRODUCT
PACKAGE
PACKAGE DRAWING
NUMBER(1)
INA116PA
INA116P
INA116UA
INA116U
16-Pin Plastic DIP
16-Pin Plastic DIP
SOL-16 Surface-Mount
SOL-16 Surface-Mount
180
180
211
211
NOTE: (1) For detailed drawing and dimension table, please see end of data
sheet, or Appendix C of Burr-Brown IC Data Book.
The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes
no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change
without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant
any BURR-BROWN product for use in life support devices and/or systems.
®
3 INA116


3Pages


INA116UA 電子部品, 半導体
TYPICAL PERFORMANCE CURVES (CONT)
At TA = +25°C, VS = ±15V, RL = 10kΩ, unless otherwise noted.
MAXIMUM OUTPUT VOLTAGE vs FREQUENCY
32 G = 10, 100
28 G = 1
24
20
16
G = 1000
12
8
4
0
100
1k 10k 100k
Frequency (Hz)
1M
VOLTAGE NOISE, 0.1 TO 10Hz
INPUT-REFERRED, G 100
1s/div
G=1
G=10
SMALL SIGNAL RESPONSE
10µs/div
20mV/div
G=100
SMALL SIGNAL RESPONSE
G=1000
100µs/div
20mV/div
G=1
G=10
LARGE SIGNAL RESPONSE
100µs/div
5V/div
G=100
G=1000
LARGE SIGNAL RESPONSE
100µs/div
5V/div
®
INA116
6

6 Page



ページ 合計 : 9 ページ
 
PDF
ダウンロード
[ INA116UA データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
INA116U

Ultra Low Input Bias Current INSTRUMENTATION AMPLIFIER

Burr-Brown Corporation
Burr-Brown Corporation
INA116UA

Ultra Low Input Bias Current INSTRUMENTATION AMPLIFIER

Burr-Brown Corporation
Burr-Brown Corporation


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap