DataSheet.jp

ISP1583 の電気的特性と機能

ISP1583のメーカーはNXP Semiconductorsです、この部品の機能は「Hi-Speed Universal Serial Bus peripheral controller」です。


製品の詳細 ( Datasheet PDF )

部品番号 ISP1583
部品説明 Hi-Speed Universal Serial Bus peripheral controller
メーカ NXP Semiconductors
ロゴ NXP Semiconductors ロゴ 




このページの下部にプレビューとISP1583ダウンロード(pdfファイル)リンクがあります。

Total 30 pages

No Preview Available !

ISP1583 Datasheet, ISP1583 PDF,ピン配置, 機能
ISP1583
Hi-Speed Universal Serial Bus peripheral controller
Rev. 03 — 12 July 2004
Product data
1. General description
The ISP1583 is a cost-optimized and feature-optimized Hi-Speed Universal Serial
Bus (USB) peripheral controller. It fully complies with Universal Serial Bus
Specification Rev. 2.0, supporting data transfer at high-speed (480 Mbit/s) and
full-speed (12 Mbit/s).
The ISP1583 provides high-speed USB communication capacity to systems based
on microcontrollers or microprocessors. It communicates with a microcontroller or
microprocessor of a system through a high-speed general-purpose parallel interface.
The ISP1583 supports automatic detection of Hi-Speed USB system operation.
Original USB fall-back mode allows the device to remain operational under full-speed
conditions. It is designed as a generic USB peripheral controller so that it can fit into
all existing device classes, such as imaging class, mass storage devices,
communication devices, printing devices and human interface devices.
The ISP1583 is a low-voltage device, which supports I/O pad voltages from 1.65 V to
3.6 V.
The internal generic Direct Memory Access (DMA) block allows easy integration into
data streaming applications. In addition, the various configurations of the DMA block
are tailored for mass storage applications.
The modular approach to implementing a USB peripheral controller allows the
designer to select the optimum system microcontroller from the wide variety available.
The ability to reuse existing architecture and firmware investments shortens the
development time, eliminates risk and reduces cost. The result is fast and efficient
development of the most cost-effective USB peripheral solution.
The ISP1583 is ideally suited for many types of peripherals, such as: printers;
scanners; magneto-optical, compact disc, digital video disc and Zip® drives; digital
still cameras; USB-to-Ethernet links; cable and DSL modems. The low power
consumption during suspend mode allows easy design of equipment that is compliant
to the ACPI™, OnNow™ and USB power management requirements.
The ISP1583 also incorporates features such as SoftConnect™, a reduced
frequency crystal oscillator, and integrated termination resistors. These features allow
significant cost savings in system design and easy implementation of advanced USB
functionality into PC peripherals.

1 Page





ISP1583 pdf, ピン配列
Philips Semiconductors
ISP1583
Hi-Speed USB peripheral controller
s Scanner.
4. Abbreviations
DMA — Direct Memory Access
EMI — ElectroMagnetic Interference
FS — Full-speed
GDMA — Generic DMA
HS — High-speed
MDMA — Multiword DMA
MMU — Memory Management Unit
MO — Magneto-Optical
NRZI — Non-Return-to-Zero Inverted
OTG — On-The-Go
PDA — Personal Digital Assistant
PID — Packet IDentifier
PIE — Parallel Interface Engine
PIO — Parallel Input/Output
PLL — Phase-Locked Loop
SE0 — Single-Ended zero
SIE — Serial Interface Engine
SRP — Session Request Protocol
USB — Universal Serial Bus.
5. Ordering information
Table 1: Ordering information
Type
number
Package
Name
Description
Version
ISP1583BS HVQFN64 plastic thermal enhanced very thin quad flat package; SOT804-1
no leads; 64 terminals; body 9 × 9 × 0.85 mm
9397 750 13461
Product data
Rev. 03 — 12 July 2004
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
3 of 87


3Pages


ISP1583 電子部品, 半導体
Philips Semiconductors
ISP1583
Hi-Speed USB peripheral controller
INT 16
READY/IORDY 15
INTRQ 14
DGND 13
DIOW 12
DIOR 11
DACK 10
DREQ
EOT
9
8
RESET_N
RREF
7
6
AGND 5
DM 4
DP 3
RPU 2
AGND 1
GND (exposed die pad)
ISP1583BS
terminal 1
33 n.c.
34 MODE1
35 DGND
36 ALE/A0
37 DATA0
38 DATA1
39 DATA2
40 DATA3
41 VCC(I/O)
42 DATA4
43 DATA5
44 DATA6
45 DATA7
46 DATA8
47 DATA9
48 DATA10
Bottom view
004aaa376
Fig 3. Pin configuration HVQFN64 (bottom view).
9397 750 13461
Product data
7.2 Pin description
Table 2: Pin description
Symbol[1] Pin Type[2] Description
AGND
1-
analog ground
RPU
2A
pull-up resistor connection; this pin must be connected to 3.3 V
through an external 1.5 kresistor for pulling-up pin DP
DP
3A
USB D+ line connection (analog)
DM
4A
USB Dline connection (analog)
AGND
5-
analog ground
RREF
6A
external bias resistor connection; this pin must be connected to
ground via a 12.0 kΩ ± 1 % resistor
Rev. 03 — 12 July 2004
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
6 of 87

6 Page



ページ 合計 : 30 ページ
 
PDF
ダウンロード
[ ISP1583 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
ISP1581

Universal Serial Bus 2.0 high-speed interface device

NXP Semiconductors
NXP Semiconductors
ISP1581BD

Universal Serial Bus 2.0 high-speed interface device

NXP Semiconductors
NXP Semiconductors
ISP1582

Hi-Speed Universal Serial Bus peripheral controller

NXP Semiconductors
NXP Semiconductors
ISP1582BS

Hi-Speed Universal Serial Bus peripheral controller

NXP Semiconductors
NXP Semiconductors


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap