|
|
KF2002-GK10AのメーカーはROHM Semiconductorです、この部品の機能は「Compact low speed thick film thermal printhead (8 dots / mm)」です。 |
部品番号 | KF2002-GK10A |
| |
部品説明 | Compact low speed thick film thermal printhead (8 dots / mm) | ||
メーカ | ROHM Semiconductor | ||
ロゴ | |||
このページの下部にプレビューとKF2002-GK10Aダウンロード(pdfファイル)リンクがあります。 Total 4 pages
Printheads
Compact low speed thick film thermal
printhead (8 dots / mm)
KF2002-GK10A
The KF2002-GK10A uses a highly-durable conductive protective film to handle label papers with top-coatings. With
ROHM’s partial glaze construction, the KF2002-GK10A is a compact and lightweight thick-film thermal print head with
printing speeds up to 3 inch / second.
FApplications
POS terminals
Label printers
CAT terminals
Multi-purpose small-sized printers
FFeatures
1) The use of the newly developed highly-durable conductive protective film
has improved countermeasures against static electricity (ESD).
2) Acheives an even smaller size and lighter weight by ROHM’s original clip
connector design and newly developed FFC (full flat cable) specifications.
3) A newly developed 144-bit IC levels the strobe partition and reduces the
noise level.
4) One rank resistance value of 1500 Ω ± 3% eliminates the inconvenience
of rank selection.
5) 2-inch, 3-inch, 4-inch, and 8-inch series are available.
FExternal dimensions (Units: mm)
1
1 Page Printheads
FTiming chart
KF2002-GK10A
FCharacteristics
3
3Pages | |||
ページ | 合計 : 4 ページ | ||
|
PDF ダウンロード | [ KF2002-GK10A データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
KF2002-GK10A | Compact low speed thick film thermal printhead (8 dots / mm) | ROHM Semiconductor |