DataSheet.jp

2SD1618 の電気的特性と機能

2SD1618のメーカーはSanyo Semicon Deviceです、この部品の機能は「PNP/NPN Epitaxial Planar Silicon Transistors」です。


製品の詳細 ( Datasheet PDF )

部品番号 2SD1618
部品説明 PNP/NPN Epitaxial Planar Silicon Transistors
メーカ Sanyo Semicon Device
ロゴ Sanyo Semicon Device ロゴ 




このページの下部にプレビューと2SD1618ダウンロード(pdfファイル)リンクがあります。

Total 3 pages

No Preview Available !

2SD1618 Datasheet, 2SD1618 PDF,ピン配置, 機能
Ordering number:1784B
PNP/NPN Epitaxial Planar Silicon Transistors
2SB1118/2SD1618
Low-Voltage High-Current Amplifier,
Muting Applications
Features
· Low collector-to-emitter saturation voltage.
· Very small size making it easy to provide high-
density, small-sized hybrid IC’s.
Package Dimensions
unit:mm
2038
[2SB1118/2SD1618]
( ) : 2SB1118
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Collector-to-Base Voltage
Collector-to-Emitter Voltage
Emitter-to-Base Voltage
Collector Current
Collector Current (Pulse)
Collector Dissipation
Symbol
VCBO
VCEO
VEBO
IC
ICP
PC
Junction Temperature
Storage Temperature
Tj
Tstg
Electrical Characteristics at Ta = 25˚C
Conditions
Mounted on ceramic board (250mm2×0.8mm)
Parameter
Symbol
Conditions
Collector Cutoff Current
Emitter Cutoff Current
DC Current Gain
Gain-Bandwidth Product
ICBO
IEBO
hFE1
hFE2
fT
VCB=(–)15V, IE=0
VEB=(–)4V, IC=0
VCE=(–)2V, IC=(–)50mA
VCE=(–)2V, IC=(–)500mA
VCE=(–)10V, IC=(–)50mA
* ; The 2SB1118/2SD1618 are classified by 50mA hFE as follows :
140 S 280 200 T 400 280 U 560
Marking 2SB1118 : BA
2SD1618 : DA
hFE rank : S, T, U
E : Emitter
C : Collector
B : Base
SANYO : PCP
(Bottom view)
Ratings
(–)20
(–)15
(–)5
(–)0.7
(–)1.5
500
1.3
150
–55 to +150
Unit
V
V
V
A
A
mW
W
˚C
˚C
Ratings
min typ
140*
60
250
max
(–)0.1
(–)0.1
560*
Unit
µA
µA
MHz
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
92098HA (KT)/4017KI/0216AT/2065MY, TS No.1784–1/3

1 Page





2SD1618 pdf, ピン配列
2SB1118/2SD1618
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customers
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customers products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any and all SANYO products described or contained herein fall under strategic
products (including services) controlled under the Foreign Exchange and Foreign Trade Control Law of
Japan, such products must not be exported without obtaining export license from the Ministry of
International Trade and Industry in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the Delivery Specification
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of September, 1998. Specifications and information herein are
subject to change without notice.
PS No.17843/3


3Pages





ページ 合計 : 3 ページ
 
PDF
ダウンロード
[ 2SD1618 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
2SD1610

Silicon NPN Epitaxial

Hitachi Semiconductor
Hitachi Semiconductor
2SD1611

Silicon NPN triple diffusion planar type Darlington(For power amplification)

Panasonic Semiconductor
Panasonic Semiconductor
2SD1614

NPN SILICON EPITAXIAL TRANSISTOR POWER MINI MOLD

NEC
NEC
2SD1615

NPN SILICON EPITAXIAL TRANSISTORS POWER MINI MOLD

NEC
NEC


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap