|
|
53111-2ZCのメーカーはMicropac Industriesです、この部品の機能は「POWER MOSFET OPTOCOUPLER」です。 |
部品番号 | 53111-2ZC |
| |
部品説明 | POWER MOSFET OPTOCOUPLER | ||
メーカ | Micropac Industries | ||
ロゴ | |||
このページの下部にプレビューと53111-2ZCダウンロード(pdfファイル)リンクがあります。 Total 11 pages
53111
POWER MOSFET OPTOCOUPLER,
90 V/1 Ω, Hermetically Sealed,
DSCC Approved 5962-9314001 and 5962-9314002
Mii
MICROCIRCUITS PRODUCTS
DIVISION
Features:
• Hermetically Sealed 8-Pin Dual-In-Line
package
• Small Size and Weight
• Options: 5mA or 10mA input forward current
• Performance Guaranteed over –55°C to
+125°C Ambient Temperature Range
• AC/DC Signal & Power Switching
• Maximum Average Current
AC/DC: 0.8 A
DC only: 1.6 A
• 1500 VDC Withstand Test Voltage
• High Transient Immunity
• 5 A Output Surge Current
• Shock and Vibration Resistant
• MIL-PRF-38534 Compliant
• Equivalent to HSSR7111/7112
Applications:
• Satellite/Space Systems
• Military/High Reliability Systems
• Standard 28 VDC and 48 VDC Load Driver
• Standard 24 VAC Load Driver
• AC/DC Electromechanical and Solid State
Relay Replacement
• I/O Modules
DESCRIPTION
The 53111 is a single channel, hermetically sealed, power MOSFET optocoupler. Low on-resistance of the
MOSFET output, combined with 1500 VDC isolation between input and output, makes this optocoupler ideal for
solid state relay applications. Operation is specified over the full military temperature range. The part is supplied in
an eight-pin, dual-in-line ceramic package, available as COTS, as fully compliant MIL-PRF-38534 Class H device,
or with custom screening. Lead options support both through-hole and surface-mount assembly. The part is
normally shipped with gold plated leads, but lead finishes per MIL-PRF-38534 are available.
Functionally, the device operates as a single-pole, normally open (1 Form A) solid state relay. The device is
actuated by an input current, which can be supplied from standard logic types such as open-collector TTL. The
input current biases a light emitting diode that is optically coupled to an integrated photovoltaic diode array. The
photovoltaic array powers control circuitry that operates the output MOSFETs.
Optimum switching of either AC or DC loads is provided by a configurable output. For AC loads, connection A in
Figure 1 must be used. Connection A will also switch DC loads but connection B, in Figure 1, provides DC-only
operation with the advantages of substantial reduction in on-resistance and twice the output current capability as
that obtained with connection A.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
www.micropac.com
E-MAIL: [email protected]
5/22/02
Pg. 1 of 11
1 Page 53111
ELECTRICAL SPECIFICATIONS
TA = -55°C to +125°C, unless otherwise specified.
Power MOSFET Optocoupler
Parameter
Sym.
Output Withstand Voltage VO(OFF)
Min.
90
Typ.*
110
Max.
Units
V
Test Conditions
VF = 0.6 V
IO = 10 µA
Notes
Output On-Resistance
(Connection A)
Output On-Resistance
(Connection B)
R(ON)
Output Leakage Current
IO (OFF)
Input Forward Voltage
Input Reverse Breakdown
Voltage
VF
VR
Input-Output Insulation
II-O
1.0
5.0
Turn-On Time
tON
Turn-Off time
tOFF
Output Transient
Rejection
dVO/dt 1000
Input-Output Transient
Rejection
dVI-O/dt 500
0.40
0.12
10-4
1.24
1.25
0.02
1.0
0.25
10
1.7
1.0
6.0
0.25
Ω
Ω
µA
V
V
µA
ms
ms
V/µs
V/µs
IF = 10 mA (for –01)
IF = 5 mA (for –02)
IO = 800 mA
(pulse duration ≤ 30 ms)
IF = 10 mA (for –01)
IF = 5 mA (for –02)
IO = 1.6 A
(pulse duration ≤ 30 ms)
VF = 0.6 V
VO = 90 V
IF = 10 mA (for –01)
IF = 5 mA (for –02)
IR = 100 µA
RH ≤ 45%, t = 5 s
VI-O = 1500 VDC
TA = 25°C
IF = 10 mA (for –01)
IF = 5 mA (for –02)
VDD = 28 VDC
IO = 800 mA
IF = 10 mA (for –01)
IF = 5 mA (for –02)
VDD = 28 VDC
IO = 800 mA
VPEAK = 50 V
CM = 1000 pF
CL = 15 pF
RM ≥ 1 MΩ
VDD = 5 V
VI-O (PEAK) = 50 V
RL = 20 kΩ
CL = 15 pF
3,
Figure
1
4, 5
Figure
6
Figure
6
Figure
7
Figure
8
* All typical values are at TA = 25ºC, IF (ON) = 10 mA (for -01) or 5 mA (for –02), VF (OFF) = 0.6V unless otherwise
specified.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
www.micropac.com
E-MAIL: [email protected]
5/22/02
Pg. 3 of 11
3Pages 53111
Power MOSFET Optocoupler
1.0
0.8
0.6
0.4
0.2
0
CONNECTION - A
_IF_
--
≥10 mA
θCA= 40°C/W
θCA= 80°C/W
-55 -25 5 35 65 95 125 155
TA - AMBIENT TEMPERATURE - °C
Figure 3. Maximum Average Output Current
Rating vs. Ambient Temperature.
12
IF ≥10 mA
10
CONNECTION - B
8
6
CONNECTION - A
4
2
0
10 100 1000
PULSE DURATION - ms
Figure 4. Single Shot (nonrepetitive)
Output Current vs. Pulse Duration.
1.0
0.8
0.6
0.4
0.2
0
CONNECTION - A
_IF_
--
≥10 mA
θCA= 40°C/W
θCA= 80°C/W
-55 -25 5 35 65 95 125 155
TA - AMBIENT TEMPERATURE - °C
Figure 5. Output Power Rating vs. Ambient Temperature.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
www.micropac.com
E-MAIL: [email protected]
5/22/02
Pg. 6 of 11
6 Page | |||
ページ | 合計 : 11 ページ | ||
|
PDF ダウンロード | [ 53111-2ZC データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
53111-2ZA | POWER MOSFET OPTOCOUPLER | Micropac Industries |
53111-2ZC | POWER MOSFET OPTOCOUPLER | Micropac Industries |