|
|
PDF 53012 Data sheet ( Hoja de datos )
| Número de pieza | 53012 | |
| Descripción | SPST SOLID-STATE RELAY | |
| Fabricantes | Micropac Industries | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 53012 (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
53012
SPST SOLID-STATE RELAY
Mii
HYBRID MICROELECTRONICS
PRODUCTS DIVISION
Features:
• Replacement for M90FS-2
• SPST, Normally Open
• Integral Short Circuit Protection
• Power FET Output Low On-state Resistance
• Full Military Temperature Operation:
-55ºC to +125ºC
• Military Environmental Screening Available
• Improved Thermal Characteristics
• Built in accordance with 85006-001
Applications:
• Low Level Power Control
• Current Loop Switches
• Isolated Line Driver Selection
• Servo and Synchro Resolver Control
• Military/Aerospace General Purpose Switching
DESCRIPTION
The 53012 is a military SPST solid-state relay. This light-weight device is resistant to damage from shock and vibration, and
is immune to contact-related problems (contamination, arcing) associated with mechanical equivalents.
Optical coupling between the input and output stages provides effective isolation up to 1000 volts AC RMS. Power FET
outputs eliminate bipolar offset, and minimize output voltage drop.
The control logic is TTL compatible, and will accommodate bias supplies between 3.8 and 32 VDC.
Integral short-circuit protection is provided in the 53012. This unit senses excessive current flow while under load or while
switching, and respond by opening the output. The output will remain blocked indefinitely until the short is removed, and the
unit reset. This feature prevents damage to the unit, and also averts further system failures that may be caused by the short-
circuit. Resetting the unit can be accomplished by cycling the input control.
This solid-state relay is ideal for use in military systems, or wherever high reliability, low power actuation, and light weight are
design considerations. Applications include general purpose signal switching and electronic load control.
ABSOLUTE MAXIMUM RATINGS
Isolation Voltage: 53012 .......................................................................................................................................1000 VAC RMS
Operating Temperature ............................................................................................................................. -55ºC to +125ºC Case
Storage Temperature ......................................................................................................................................... -55ºC to +125ºC
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St, Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
03/15/01
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet 53012.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 53012 | SPST SOLID-STATE RELAY | Micropac Industries |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |