|
|
42118-012のメーカーはMicropac Industriesです、この部品の機能は「POSITIVE HIGH TEMPERATURE FIXED VOLTAGE REGULATOR」です。 |
部品番号 | 42118-012 |
| |
部品説明 | POSITIVE HIGH TEMPERATURE FIXED VOLTAGE REGULATOR | ||
メーカ | Micropac Industries | ||
ロゴ | |||
このページの下部にプレビューと42118-012ダウンロード(pdfファイル)リンクがあります。 Total 3 pages
42118
POSITIVE HIGH TEMPERATURE
FIXED VOLTAGE REGULATOR
Designed for use in high temperature environments
Mii
HYBRID MICROELECTRONICS
PRODUCTS DIVISION
Features:
• Operating temperature +200ºC
• Output current to 1.0 A
• Input voltage to +30 V
• Internal short circuit protection, foldback and
current limiting
• Isolated TO-258 package
Applications:
• Military and Hi Rel Industrial harsh environment
applications where hermetically sealed product is
required
• Down hole applications
DESCRIPTION
The 42118 series of fixed voltage regulators covers the output voltage range from +5 VDC through +30 VDC. These voltage
regulators are fabricated using hybrid techniques and will operate at temperatures up to +200ºC. These devices are
complete with internal short circuit protection, which includes voltage shutdown and current foldback. The 42118 series
voltage regulators normally do not require any additional components. However, for good design practice, an external filter
cap of 2µF should be installed at the input, as close to the case as possible.
ABSOLUTE MAXIMUM RATINGS AT 200°C CASE TEMPERATURE
Output Current (IOUT) ............................................................................................................................................................ 1.0 A
Input Voltage (VIN) ........................................................................................................................................................ +38 VDC
Storage Temperature (TSTG)............................................................................................................................................. +250°C
Power Dissipation (Pd) ........................................................................................................................................................... 8 W
Typical Connection Diagram
RECTIFIED
INPUT
VIN
AS REQUESTED
+
2uf
D1
HEADER
2
COMMON
VOUT
+
REGULATED
OUTPUT
AS REQUESTED
Note: D1 should be installed for input safety.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
1 Page 42118
POSITIVE HIGH TEMPERATURE, FIXED VOLTAGE REGULATOR
Mechanical Configuration
All dimensions in inches
Pin Function
1 VOUT
2 Common
3 VIN
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
3Pages | |||
ページ | 合計 : 3 ページ | ||
|
PDF ダウンロード | [ 42118-012 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
42118-012 | POSITIVE HIGH TEMPERATURE FIXED VOLTAGE REGULATOR | Micropac Industries |
42118-015 | POSITIVE HIGH TEMPERATURE FIXED VOLTAGE REGULATOR | Micropac Industries |
42118-018 | POSITIVE HIGH TEMPERATURE FIXED VOLTAGE REGULATOR | Micropac Industries |