DataSheet.es    


PDF 5962F0152101VXC Data sheet ( Hoja de datos )

Número de pieza 5962F0152101VXC
Descripción Radiation Hardened 9A/ Non-Inverting Power MOSFET Drivers
Fabricantes Intersil Corporation 
Logotipo Intersil Corporation Logotipo



Hay una vista previa y un enlace de descarga de 5962F0152101VXC (archivo pdf) en la parte inferior de esta página.


Total 2 Páginas

No Preview Available ! 5962F0152101VXC Hoja de datos, Descripción, Manual

Data Sheet
ISL74422ARH
June 2001
File Number 9031.1
itle
L74
2AR
ea
b-
t
adia-
n
rd-
ed
,
n-
ert-
wer
S-
T
iv-
)
utho
)
ey-
rds
ter-
rpo-
ion,
mi-
n-
ctor,
dia-
n
rd-
ed,
d
rd,
ace,
tel-
,
Radiation Hardened 9A, Non-Inverting
Power MOSFET Drivers
The Radiation Hardened ISL4422ARH is a non-inverting,
monolithic high-speed MOSFET driver designed to convert a
5V CMOS level input signal into a high current output at
voltages up to 18V. Its fast rise times and high current output
allow very quick control of even the largest power MOSFETs
in high frequency applications.
The input of the ISL4422ARH can be directly driven by our
HS-1825ARH and IS-1845ASRH PWM devices. The 9A
high current output minimizes power losses in MOSFETs by
rapidly charging and discharging high gate capacitances.
Constructed with the Intersil dielectrically isolated Rad Hard
Silicon Gate (RSG) BiCMOS process, these devices are
immune to Single Event Latch-up and have been specifically
designed to provide highly reliable performance in harsh
radiation environments.
Specifications for Rad Hard QML devices are controlled
by the Defense Supply Center in Columbus (DSCC). The
SMD numbers listed here must be used when ordering.
Detailed Electrical Specifications for these devices are
contained in SMD 5962-01521. A “hot-link” is provided
on our homepage for downloading.
www.intersil.com/spacedefense/space.asp
Pinout
ISL74422ARH-F (FLATPACK CDFP4-F16)
TOP VIEW
NC
NC
LVS
IN
LGND
NC
NC
GND
1 16
2 15
3 14
4 13
5 12
6 11
7 10
89
VS
VS
NC
OUT
OUT
NC
NC
GND
NOTES:
1. Pin 3 provides the supply voltage for the control logic. It is not
internally connected to Pins 15 and 16 for noise immunity
purposes, but may be connected externally.
2. Pin 5 is the control logic return. It is not internally connected to
Pins 8 and 9 for noise immunity purposes, but may be connected
externally.
3. Pins 8 and 9 MUST both be connected to GND.
4. Pins 12 and 13 MUST both be connected to the output.
5. Pins 15 and 16 MUST both be connected to VS.
Features
• QML Qualified per MIL-PRF-38535 Requirements
• Electrically Screened to DSCC SMD # 5962-01521
• Radiation Environment
- Total Dose (Max) . . . . . . . . . . . . . . . . . . . . 300krad(SI)
- Latch-Up Immune
- Negligible Sensitivity to Low Dose Rates
• IPEAK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9A(Min)
• TF (CL = 10,000pF). . . . . . . . . . . . . . 70ns(Typ); 90ns(Max)
• TR (CL = 10,000pF) . . . . . . . . . . . 90ns(Typ); 105ns(Max)
• Prop Delay High-Low (CL = 10,000pF) . . . . . . . 75ns(Max)
55ns(Typ)
• Prop Delay Low-High (CL = 10,000pF) . . . . . . . 50ns(Max)
30ns(Typ)
• Consistent Delay Times with VCC Changes
• Wide Supply Voltage Range . . . . . . . . . . . . . . . 7V to 18V
• Low Stand-by Power Consumption
- Input Low . . . . . . . . . . . . . . . . . . . . . . . . . . <2mW(Max)
- Inputs High . . . . . . . . . . . . . . . . . . . . . . . . <18mW(Max)
• ESD Protected . . . . . . . . . . . . . . . . . . . . . . . . . . . .>1750V
Applications
• Switching Power Supplies
• DC/DC Converters
• Motor Controllers
Ordering Information
ORDERING NUMBER
INTERNAL
MKT. NUMBER
TEMP. RANGE
(oC)
5962F0152101VXC
ISL74422ARHVF
-55 to 125
5962F0152101QXC
ISL74422ARHQF
-55 to 125
ISL74422ARHF/Proto ISL74422ARHF/Proto -55 to 125
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil and Design is a trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2001, All Rights Reserved

1 page





PáginasTotal 2 Páginas
PDF Descargar[ Datasheet 5962F0152101VXC.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
5962F0152101VXCRadiation Hardened 9A/ Non-Inverting Power MOSFET DriversIntersil Corporation
Intersil Corporation

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar