DataSheet.jp

5962-9054305MXA PDF Datasheet ( 特性, スペック, ピン接続図 )

部品番号 5962-9054305MXA
部品説明 CMOS High Performance Programmable DMA Controller
メーカ Intersil Corporation
ロゴ Intersil Corporation ロゴ 



Total 25 pages
		

No Preview Available !

5962-9054305MXA Datasheet, 5962-9054305MXA PDF,ピン配置, 機能
82C237
March 1997
CMOS High Performance
Programmable DMA Controller
Features
Description
• Fully Compatible with Intersil 82C37A
- 82C237 May be Used in 8MHz and 12.5MHz 82C37A
Sockets
• Optimized for 10MHz and 12.5MHz 80C286 Systems
• Special Mode Permits 16-Bit, Zero Wait State DMA
Transfers
• High Speed Data Transfers:
- Up to 6.25MBytes/sec with 12.5MHz Clock in
Normal Mode
- Up to 12.5MBytes/sec with 12.5MHz Clock in 16-Bit
Mode
• Compatible with the NMOS 8237A
• Four Independent Maskable Channels with Autoinitial-
ization Capability
• Cascadable to any Number of Channels
• Memory-to-Memory Transfers
• Static CMOS Design Permits Low Power Operation
- ICCSB = 10µA Maximum
- ICCOP = 2mA/MHz Maximum
• Fully TTL/CMOS Compatible
• Internal Registers may be Read from Software
The 82C237 is a modified version of the 82C37A. The
82C237 is fully software and pin for pin compatible with the
82C37A but provides an additional mode for 16-bit DMA
transfers, as well as enhanced speed. Each channel may be
individually programmed for 8-bit or 16-bit data transfers.
The 82C237 controller can improve system performance by
allowing external devices to transfer data directly to or from
system memory. Memory-to-memory transfer capability is
also provided, along with a memory block initialization fea-
ture. DMA requests may be generated by either hardware or
software, and each channel is independently programmable
with a variety of features for flexible operation.
The 82C237 is designed to be used with an external address
latch, such as the 82C82, to demultiplex the most significant
8 bits of address. An additional latch is required to
temporarily store the most significant 8 bits of data if 16-bit
memory-to-memory transfers are desired. The 82C237 can
be used with industry standard microprocessors such as
80C286, 80286, 80C86, 80C88, 8086, 8088, 8085, Z80,
NSC800, 80186 and others. Multimode programmability
allows the user to select from three basic types of DMA
services, and reconfiguration under program control is
possible even with the clock to the controller stopped. Each
channel has a full 64K address and word count range, and
may be programmed to autoinitialize these registers
following DMA termination (end of process).
Ordering Information
PACKAGE
PDIP
PLCC
SBDIP
TEMPERATURE
RANGE
0oC to +70oC
-40oC to +85oC
0oC to +70oC
-40oC to +85oC
0oC to +70oC
-40oC to +85oC
-55oC to +125oC
SMD#
CLCC
SMD#
-55oC to +125oC
8MHz
CP82C237
IP82C237
CS82C237
IS82C237
CD82C237
ID82C237
MD82C237/B
5962-9054304MQA
MR82C237/B
5962-9054304MXA
12.5MHz
CP82C237-12
IP82C237-12
CS82C237-12
IS82C237-12
CD82C237-12
ID82C237-12
MD82C237-12/B
5962-9054305MQA
MR82C237-12/B
5962-9054305MXA
PKG. NO.
E40.6
E40.6
N44.65
N44.65
F40.6
F40.6
F40.6
F40.6
J44.A
J44.A
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999
4-148
File Number 2965.1

1 Page





ページ 合計 : 25 ページ
PDF
ダウンロード
[ 5962-9054305MXA.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
5962-9054305MXA

CMOS High Performance Programmable DMA Controller

Intersil Corporation
Intersil Corporation

www.DataSheet.jp    |   2019   |  メール    |   最新    |   Sitemap